From 4172351baa285b83eb54d54368fe2f037c48159b Mon Sep 17 00:00:00 2001 From: Saul Wold Date: Tue, 25 Aug 2015 16:39:01 -0700 Subject: Remove older platform specific BSPs The intel-core* BSPs supercede these older BSPs therefore it's time to remove these older platform specific bsps. Bump LAYERVERSION to 3 to allow the Autobuilder to know that these BSPs have been removed. Signed-off-by: Saul Wold --- meta-fri2/COPYING.MIT | 17 - meta-fri2/README | 339 ----------------- meta-fri2/README.sources | 17 - meta-fri2/binary/.gitignore | 0 meta-fri2/conf/layer.conf | 12 - meta-fri2/conf/machine/fri2-noemgd.conf | 36 -- .../recipes-bsp/alsa-state/alsa-state.bbappend | 1 - .../alsa-state/alsa-state/fri2-noemgd/asound.state | 411 --------------------- .../formfactor/formfactor/fri2-noemgd/machconfig | 3 - .../recipes-bsp/formfactor/formfactor_0.0.bbappend | 1 - meta-fri2/recipes-bsp/grub/grub-efi_2.00.bbappend | 13 - .../init-ifupdown/files/fri2-noemgd/interfaces | 9 - .../init-ifupdown/init-ifupdown_1.0.bbappend | 1 - meta-fri2/recipes-kernel/kmod/kmod_git.bbappend | 3 - 14 files changed, 863 deletions(-) delete mode 100644 meta-fri2/COPYING.MIT delete mode 100644 meta-fri2/README delete mode 100644 meta-fri2/README.sources delete mode 100644 meta-fri2/binary/.gitignore delete mode 100644 meta-fri2/conf/layer.conf delete mode 100644 meta-fri2/conf/machine/fri2-noemgd.conf delete mode 100644 meta-fri2/recipes-bsp/alsa-state/alsa-state.bbappend delete mode 100644 meta-fri2/recipes-bsp/alsa-state/alsa-state/fri2-noemgd/asound.state delete mode 100644 meta-fri2/recipes-bsp/formfactor/formfactor/fri2-noemgd/machconfig delete mode 100644 meta-fri2/recipes-bsp/formfactor/formfactor_0.0.bbappend delete mode 100644 meta-fri2/recipes-bsp/grub/grub-efi_2.00.bbappend delete mode 100644 meta-fri2/recipes-core/init-ifupdown/files/fri2-noemgd/interfaces delete mode 100644 meta-fri2/recipes-core/init-ifupdown/init-ifupdown_1.0.bbappend delete mode 100644 meta-fri2/recipes-kernel/kmod/kmod_git.bbappend (limited to 'meta-fri2') diff --git a/meta-fri2/COPYING.MIT b/meta-fri2/COPYING.MIT deleted file mode 100644 index fb950dc6..00000000 --- a/meta-fri2/COPYING.MIT +++ /dev/null @@ -1,17 +0,0 @@ -Permission is hereby granted, free of charge, to any person obtaining a copy -of this software and associated documentation files (the "Software"), to deal -in the Software without restriction, including without limitation the rights -to use, copy, modify, merge, publish, distribute, sublicense, and/or sell -copies of the Software, and to permit persons to whom the Software is -furnished to do so, subject to the following conditions: - -The above copyright notice and this permission notice shall be included in -all copies or substantial portions of the Software. - -THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR -IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, -FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE -AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER -LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, -OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN -THE SOFTWARE. diff --git a/meta-fri2/README b/meta-fri2/README deleted file mode 100644 index 6e90c335..00000000 --- a/meta-fri2/README +++ /dev/null @@ -1,339 +0,0 @@ -This README file contains information on building the meta-fri2 BSP -layer and booting the images contained in the /binary directory. -Please see the corresponding sections below for details. - -The Fish River Island II BSP supports the Kontron M2M Smart Services -Developer Kit, as described here: - -http://us.kontron.com/products/systems+and+platforms/m2m/m2m+smart+services+developer+kit.html - -The 'Queens Bay' platform consists of the Intel Atom E640T processor plus the -Intel EG20T Platform Controller Hub (Tunnel Creek + Topcliff). The Fish River -Island II includes a variety of communications options and other -machine-to-machine (m2m) capabilities. - -Information on all Intel embedded platforms can be found here: - - http://www.intel.com/p/en_US/embedded/hwsw/hardware - - -Yocto Project Compatible -======================== - -This BSP is compatible with the Yocto Project as per the requirements -listed here: - - https://www.yoctoproject.org/webform/yocto-project-compatible-registration - - -Dependencies -============ - -This layer depends on: - - URI: git://git.openembedded.org/bitbake - branch: master - - URI: git://git.openembedded.org/openembedded-core - layers: meta - branch: master - - URI: git://git.yoctoproject.org/meta-intel - layers: intel - branch: master - - -Patches -======= - -Please submit any patches against this BSP to the meta-intel mailing list -(meta-intel@yoctoproject.org) and cc: the maintainer: - -Maintainer: Darren Hart - -Please see the meta-intel/MAINTAINERS file for more details. - - -Table of Contents -================= - - I. Building the meta-fri2 BSP layer - II. Booting the images in /binary -III. Device Notes - a. BIOS and Firmware - b. Serial Port - c. HDMI - d. Power Reset - e. Accelerometer - f. GPIO - g. MMC - h. 802.11 - i. 802.15.4 - j. Audio - k. Optional Devices - IV. Known Issues - a. EFI boot fails - b. Client USB is disabled - c. Audio over secondary HDMI port only - V. Additional Resources - - -I. Building the meta-fri2 BSP layer -=================================== - -In order to build an image with BSP support for a given release, you -need to download the corresponding BSP tarball from the 'Board Support -Package (BSP) Downloads' page of the Yocto Project website. - -Having done that, and assuming you extracted the BSP tarball contents -at the top-level of your yocto build tree, you can build an fri2 image -by adding the location of the meta-intel and meta-fri2 layers to -bblayers.conf, e.g.: - - yocto/meta-intel \ - yocto/meta-intel/meta-fri2 \ - -The meta-fri2 layer contains support for fri2-noemgd machine configuration. -The previously supported fri2 machine with the proprietary EMGD graphics -driver has been retired. The 'fri2-noemgd' machine configuration uses -the open source 'vesa' kernel driver. - -To enable the layer add the following to the local.conf file: - - MACHINE ?= "fri2-noemgd" - -You should then be able to build an fri2 image as such: - - $ source oe-init-build-env - $ bitbake core-image-sato - -At the end of a successful build, you should have a live image that -you can boot from a USB flash drive (see instructions on how to do -that below, in the section 'Booting the images from /binary'). - -As an alternative to downloading the BSP tarball, you can also work -directly from the meta-intel git repository. For each BSP in the -'meta-intel' repository, there are multiple branches, one -corresponding to each major release starting with 'laverne' (0.90), in -addition to the latest code which tracks the current master (note that -not all BSPs are present in every release). Instead of extracting a -BSP tarball at the top level of your yocto build tree, you can -equivalently check out the appropriate branch from the meta-intel -repository at the same location. - - -II. Booting the images in /binary -================================= - -This BSP contains bootable live images, which can be used to directly -boot Yocto off of a USB flash drive. - -Under Linux, insert a USB flash drive. Assuming the USB flash drive -takes device /dev/sdf, use dd to copy the live image to it. For -example: - -# dd if=core-image-sato-fri2-noemgd.hddimg of=/dev/sdf -# sync -# eject /dev/sdf - -This should give you a bootable USB flash device. Insert the device -into one of the USB host ports on the target, and power on. This -should result in a system booted to the Sato graphical desktop. - -If you want a terminal, use the arrows at the top of the UI to move to -different pages of available applications, one of which is named -'Terminal'. Clicking that should give you a root terminal. - -If you want to ssh into the system, you can use the root terminal to -ifconfig the IP address and use that to ssh in. The root password is -empty, so to log in type 'root' for the user name and hit 'Enter' at -the Password prompt: and you should be in. - -If instead of a live image, you would like to prepare an EFI bootable -partitioned image, use the mkefidisk.sh script provided in the scripts -directory of this BSP. Future versions of the images have an EFI -installer integrated into the live image. - ----- - -If you find you're getting corrupt images on the USB (it doesn't show -the syslinux boot: prompt, or the boot: prompt contains strange -characters), try doing this first: - -# dd if=/dev/zero of=/dev/sdf bs=1M count=512 - - -III. Device Notes -================================ -a. BIOS and Firmware - -Units provided from the Yocto Project Fish River Island 2 Giveaway -Program are preconfigured with the Intel provided Fast Boot EFI -firmware. This firmware will search the available devices (USB, SD, -and mSATA) for a valid EFI payload at "EFI\BOOT\BOOTIA32.EFI". If it -fails to find one, it will launch the EFI shell and optionally execute -a "startup.nsh" script if it finds the script on the available storage -devices. It searches the devices in the following order: USB, SD, -mSATA. - -Units acquired via other channels may have the Kontron supplied APTIO -(AMI) BIOS. This is a PCBIOS and EFI firmware with a traditional BIOS -configuration menu which can be used to define a variety of boot -configurations. - -b. Serial Port --------------- -The FRI2 has an optional serial daughter card providing a serial -console via the micro-USB port on the top of the device adjacent the -SIM card slot. - -The UART from the EG20T is connected to a TI UART-to-USB device -(TUSB3410) which appears as a serial port on the host computer. From a -Linux host, load the driver with the following options: - -# modprobe ti_usb_3410_5052 vendor_3410=0x0451 product_3410=0x5053 - -In future versions of the Linux kernel (3.4 and later), the -vendor and product codes are detected automatically. - -When you power on your FRI2, your host will discover a serial device -and name it /dev/ttyUSB0 (or similar). You can communicate with this -device at 115200 8N1 using your preferred terminal emulator. - -If using the Intel provided Fast Boot EFI firmware, no additional -configuration is required. If using the APTIO (AMI) BIOS, use the -following settings to configure console redirection in the BIOS menu: - - Advanced - Serial Port Console Redirection - COM2 - Console Redirection [Enabled] - Console Redirection Settings - Terminal Type [ANSI] - Bits per second [115200] - Data Bits [8] - Parity [None] - Stop Bits [1] - Flow Control [None] - Recorder Mode [Disabled] - Resolution 100x31 [Disabled] - Legacy OS Redirection [80x24] - -c. HDMI -------- -The FRI2 has two micro HDMI ports. For the Intel provided Fast Boot -EFI firmware, the one closest to the bottom of the device is the -primary display. For the APTIO (AMI) BIOS, the jack nearest the 1/8" -audio jacks is the primary display. - -d. Power Reset --------------- -The recessed button adjacent the LEDs on the top of the device is a -power reset button. - -e. Accelerometer ----------------- -The LIS331DLH accelerometer is connected to the I2C bus on the CPLD on -the compute module. The driver for this chip is under active -development and will be included in the BSP once completed. - -f. GPIO -------- -The FRI2 has two I2C PCA555x GPIO devices used for internal control -signals. These have not been exposed in the current release of the -BSP, but may be in the future. Regardless, these would not provide -general purpose IO with which to read or drive additional signals. - -g. MMC ------- -The FRI2 provides two microSD card MMC devices. One is located -adjacent the 1/8" audio jacks, another is located on the board inside -the chassis. These devices can be used to boot the device, or as -secondary storage. - -h. 802.11 ---------- -The Intel Corporation Centrino Advanced-N 6205 that ships with the -FRI2 is supported. You can use connman-gnome to configures the -interface. - -i. 802.15.4 ------------ -The TI CC2531 802.15.4 radio is a USB ACM modem. The MAC is enabled by -issuing the following command: - -# echo J > /dev/ttyACM0 - -The bank of 3 LEDs nearest the power reset button will change if this -command is executed successfully. If you have a 3G modem installed, -the 802.15.4 device may appear as /dev/ttyACM3 instead. - -No further testing or integration has been done. - -j. Audio --------------------- -The FRI2 has an 1/8" analog output (nearest the antennae), a line-in -input below that, as well as SPDIF over HDMI. These can be tested -using the alsa-utils package. The aplay -l command will list both -playback devices: - -# aplay -l -**** List of PLAYBACK Hardware Devices **** -card 0: MID [HDA Intel MID], device 0: ALC262 Analog [ALC262 Analog] - Subdevices: 1/1 - Subdevice #0: subdevice #0 -card 0: MID [HDA Intel MID], device 3: ALC262 Digital [ALC262 Digital] - Subdevices: 1/1 - Subdevice #0: subdevice #0 - -Using a sample WAV file, you can use aplay to play to either device: - -Over analog: -# aplay -D plughw:0,0 sample.wav - -Over HDMI: -# aplay -D plughw:0,3 sample.wav - - -k. Optional Devices -------------------- -The FRI2 has two mini-PCIe slots internally. The device ships with a -half-length wireless card installed. This can be replaced with a -wireless + bluetooth card. The other slot is available for use with -cellular cards or mSATA SSDs. - -The Ericsson F5521gw 3G modem has been verifed with the FRI2 images. -Note that the connman-gnome UI does not allow for configuring the -cellular interface. The ofono-tests package can be used to configure -the modem and bring up an interface. - - -IV. Known Issues ----------------- -a. EFI ------- -The APTIO (AMI) BIOS does not yet boot the EFI payload provided on the -FRI2 live image. This is a known issue under investigation. If using -this firmware, boot using PCBIOS mode, rather than EFI. The Intel -provided Fast Boot EFI firmware will boot the EFI payload. - -b. Client USB is disabled -------------------------- -The micro-USB port adjacent the primary HDMI port is intended for Client -USB functionality, but is not supported on current revisions of the -device. - -c. Audio over secondary HDMI port only --------------------------------------- -While audio over HDMI has been shown to work, it seems to only work over -the secondary (bottom-most) HDMI port. There does not appear to be a -deterministic way of getting the device to output the signal (video and -audio) over the secondary port. - - -V. Additional Resources ------------------------ -In addition to this README, please see the following wiki page for tips -on using the FRI2 with the Yocto Project: - -https://wiki.yoctoproject.org/wiki/BSPs/FRI2 diff --git a/meta-fri2/README.sources b/meta-fri2/README.sources deleted file mode 100644 index 0d4d849a..00000000 --- a/meta-fri2/README.sources +++ /dev/null @@ -1,17 +0,0 @@ -The sources for the packages comprising the images shipped with this -BSP can be found at the following location: - -http://downloads.yoctoproject.org/mirror/sources/ - -The metadata used to generate the images shipped with this BSP, in -addition to the code contained in this BSP, can be found at the -following location: - -http://downloads.yoctoproject.org/releases/yocto/yocto-1.3/poky-danny-8.0.tar.bz2 - -The metadata used to generate the images shipped with this BSP, in -addition to the code contained in this BSP, can also be found at the -following locations: - -git://git.yoctoproject.org/poky.git -git://git.yoctoproject.org/meta-intel diff --git a/meta-fri2/binary/.gitignore b/meta-fri2/binary/.gitignore deleted file mode 100644 index e69de29b..00000000 diff --git a/meta-fri2/conf/layer.conf b/meta-fri2/conf/layer.conf deleted file mode 100644 index 0bb29a13..00000000 --- a/meta-fri2/conf/layer.conf +++ /dev/null @@ -1,12 +0,0 @@ -# We have a conf and classes directory, add to BBPATH -BBPATH .= ":${LAYERDIR}" - -# We have a recipes directory, add to BBFILES -BBFILES += "${LAYERDIR}/recipes-*/*/*.bb \ - ${LAYERDIR}/recipes-*/*/*.bbappend" - -BBFILE_COLLECTIONS += "fri2" -BBFILE_PATTERN_fri2 := "^${LAYERDIR}/" -BBFILE_PRIORITY_fri2 = "6" - -LAYERDEPENDS_fri2 = "intel" diff --git a/meta-fri2/conf/machine/fri2-noemgd.conf b/meta-fri2/conf/machine/fri2-noemgd.conf deleted file mode 100644 index bdf4b0dd..00000000 --- a/meta-fri2/conf/machine/fri2-noemgd.conf +++ /dev/null @@ -1,36 +0,0 @@ -#@TYPE: Machine -#@NAME: fri2 - -#@WEBTITLE: Intel Atom E640T Processor with Intel EG20T Controller Hub Development Kit (Queens Bay) with Open Source VESA Graphics for Fish River Island II systems - -#@DESCRIPTION: Machine configuration for Fish River Island II systems, without Intel-proprietary graphics bits - -require conf/machine/include/intel-core2-32-common.inc -require conf/machine/include/intel-common-pkgarch.inc -require conf/machine/include/meta-intel.inc - -MACHINE_FEATURES += "wifi 3g pcbios efi" -MACHINE_FEATURES += "intel-ucode" - -MACHINE_EXTRA_RRECOMMENDS += "linux-firmware-iwlwifi-6000g2a-5" - -PREFERRED_PROVIDER_virtual/kernel ?= "linux-yocto" -PREFERRED_VERSION_linux-yocto ?= "3.19%" - -XSERVER ?= "${XSERVER_X86_BASE} \ - ${XSERVER_X86_EXT} \ - ${XSERVER_X86_FBDEV} \ - " - -# Syslinux does not know about the 64MHz uart clock and it does not detect the -# serial device by number. Use the IO port directly and divide the baud down to -# trick syslinux into configuring a 115200 baud. -SYSLINUX_OPTS = "serial 0xb060 3318" -SERIAL_CONSOLE = "115200 ttyPCH1" -APPEND += "console=ttyPCH1,115200 console=tty0" - -# EFI boot will ignore this and use the EFI framebuffer at 800x600 -APPEND += "video=vesafb vga=0x318" - -# MSI interrupts fail for the HDA device when using the EFI firmware -APPEND += "snd_hda_intel.enable_msi=0" diff --git a/meta-fri2/recipes-bsp/alsa-state/alsa-state.bbappend b/meta-fri2/recipes-bsp/alsa-state/alsa-state.bbappend deleted file mode 100644 index 72d991c7..00000000 --- a/meta-fri2/recipes-bsp/alsa-state/alsa-state.bbappend +++ /dev/null @@ -1 +0,0 @@ -FILESEXTRAPATHS_prepend := "${THISDIR}/${PN}:" diff --git a/meta-fri2/recipes-bsp/alsa-state/alsa-state/fri2-noemgd/asound.state b/meta-fri2/recipes-bsp/alsa-state/alsa-state/fri2-noemgd/asound.state deleted file mode 100644 index 8a89f0bc..00000000 --- a/meta-fri2/recipes-bsp/alsa-state/alsa-state/fri2-noemgd/asound.state +++ /dev/null @@ -1,411 +0,0 @@ -state.MID { - control.1 { - iface MIXER - name 'PCM Playback Volume' - value.0 24 - value.1 24 - comment { - access 'read write' - type INTEGER - count 2 - range '0 - 30' - dbmin -4500 - dbmax 0 - dbvalue.0 -900 - dbvalue.1 -900 - } - } - control.2 { - iface MIXER - name 'PCM Playback Switch' - value.0 true - value.1 true - comment { - access 'read write' - type BOOLEAN - count 2 - } - } - control.3 { - iface MIXER - name 'Headphone Playback Volume' - value.0 0 - value.1 0 - comment { - access 'read write' - type INTEGER - count 2 - range '0 - 30' - dbmin -4500 - dbmax 0 - dbvalue.0 -4500 - dbvalue.1 -4500 - } - } - control.4 { - iface MIXER - name 'Headphone Playback Switch' - value.0 false - value.1 false - comment { - access 'read write' - type BOOLEAN - count 2 - } - } - control.5 { - iface MIXER - name 'Rear Mic Playback Volume' - value.0 0 - value.1 0 - comment { - access 'read write' - type INTEGER - count 2 - range '0 - 31' - dbmin -3450 - dbmax 1200 - dbvalue.0 -3450 - dbvalue.1 -3450 - } - } - control.6 { - iface MIXER - name 'Rear Mic Playback Switch' - value.0 false - value.1 false - comment { - access 'read write' - type BOOLEAN - count 2 - } - } - control.7 { - iface MIXER - name 'Front Mic Playback Volume' - value.0 0 - value.1 0 - comment { - access 'read write' - type INTEGER - count 2 - range '0 - 31' - dbmin -3450 - dbmax 1200 - dbvalue.0 -3450 - dbvalue.1 -3450 - } - } - control.8 { - iface MIXER - name 'Front Mic Playback Switch' - value.0 false - value.1 false - comment { - access 'read write' - type BOOLEAN - count 2 - } - } - control.9 { - iface MIXER - name 'Line Playback Volume' - value.0 0 - value.1 0 - comment { - access 'read write' - type INTEGER - count 2 - range '0 - 31' - dbmin -3450 - dbmax 1200 - dbvalue.0 -3450 - dbvalue.1 -3450 - } - } - control.10 { - iface MIXER - name 'Line Playback Switch' - value.0 false - value.1 false - comment { - access 'read write' - type BOOLEAN - count 2 - } - } - control.11 { - iface MIXER - name 'CD Playback Volume' - value.0 0 - value.1 0 - comment { - access 'read write' - type INTEGER - count 2 - range '0 - 31' - dbmin -3450 - dbmax 1200 - dbvalue.0 -3450 - dbvalue.1 -3450 - } - } - control.12 { - iface MIXER - name 'CD Playback Switch' - value.0 false - value.1 false - comment { - access 'read write' - type BOOLEAN - count 2 - } - } - control.13 { - iface MIXER - name 'Auto-Mute Mode' - value Disabled - comment { - access 'read write' - type ENUMERATED - count 1 - item.0 Disabled - item.1 Enabled - } - } - control.14 { - iface MIXER - name 'Rear Mic Boost Volume' - value.0 0 - value.1 0 - comment { - access 'read write' - type INTEGER - count 2 - range '0 - 3' - dbmin 0 - dbmax 3000 - dbvalue.0 0 - dbvalue.1 0 - } - } - control.15 { - iface MIXER - name 'Front Mic Boost Volume' - value.0 0 - value.1 0 - comment { - access 'read write' - type INTEGER - count 2 - range '0 - 3' - dbmin 0 - dbmax 3000 - dbvalue.0 0 - dbvalue.1 0 - } - } - control.16 { - iface MIXER - name 'Capture Switch' - value.0 true - value.1 true - comment { - access 'read write' - type BOOLEAN - count 2 - } - } - control.17 { - iface MIXER - name 'Capture Switch' - index 1 - value.0 false - value.1 false - comment { - access 'read write' - type BOOLEAN - count 2 - } - } - control.18 { - iface MIXER - name 'Capture Switch' - index 2 - value.0 false - value.1 false - comment { - access 'read write' - type BOOLEAN - count 2 - } - } - control.19 { - iface MIXER - name 'Capture Volume' - value.0 25 - value.1 25 - comment { - access 'read write' - type INTEGER - count 2 - range '0 - 31' - dbmin -1200 - dbmax 3450 - dbvalue.0 2550 - dbvalue.1 2550 - } - } - control.20 { - iface MIXER - name 'Capture Volume' - index 1 - value.0 0 - value.1 0 - comment { - access 'read write' - type INTEGER - count 2 - range '0 - 31' - dbmin -1200 - dbmax 3450 - dbvalue.0 -1200 - dbvalue.1 -1200 - } - } - control.21 { - iface MIXER - name 'Capture Volume' - index 2 - value.0 0 - value.1 0 - comment { - access 'read write' - type INTEGER - count 2 - range '0 - 31' - dbmin -1200 - dbmax 3450 - dbvalue.0 -1200 - dbvalue.1 -1200 - } - } - control.22 { - iface MIXER - name 'Input Source' - value Line - comment { - access 'read write' - type ENUMERATED - count 1 - item.0 'Rear Mic' - item.1 'Front Mic' - item.2 Line - item.3 CD - } - } - control.23 { - iface MIXER - name 'Input Source' - index 1 - value 'Rear Mic' - comment { - access 'read write' - type ENUMERATED - count 1 - item.0 'Rear Mic' - item.1 'Front Mic' - item.2 Line - item.3 CD - } - } - control.24 { - iface MIXER - name 'Input Source' - index 2 - value 'Rear Mic' - comment { - access 'read write' - type ENUMERATED - count 1 - item.0 'Rear Mic' - item.1 'Front Mic' - item.2 Line - item.3 CD - } - } - control.25 { - iface MIXER - name 'IEC958 Playback Con Mask' - value '0fff000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000' - comment { - access read - type IEC958 - count 1 - } - } - control.26 { - iface MIXER - name 'IEC958 Playback Pro Mask' - value '0f00000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000' - comment { - access read - type IEC958 - count 1 - } - } - control.27 { - iface MIXER - name 'IEC958 Playback Default' - value '0400000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000' - comment { - access 'read write' - type IEC958 - count 1 - } - } - control.28 { - iface MIXER - name 'IEC958 Playback Switch' - value true - comment { - access 'read write' - type BOOLEAN - count 1 - } - } - control.29 { - iface MIXER - name 'IEC958 Default PCM Playback Switch' - value true - comment { - access 'read write' - type BOOLEAN - count 1 - } - } - control.30 { - iface MIXER - name 'Master Playback Volume' - value 24 - comment { - access 'read write' - type INTEGER - count 1 - range '0 - 30' - dbmin -4500 - dbmax 0 - dbvalue.0 -900 - } - } - control.31 { - iface MIXER - name 'Master Playback Switch' - value true - comment { - access 'read write' - type BOOLEAN - count 1 - } - } -} diff --git a/meta-fri2/recipes-bsp/formfactor/formfactor/fri2-noemgd/machconfig b/meta-fri2/recipes-bsp/formfactor/formfactor/fri2-noemgd/machconfig deleted file mode 100644 index ffce0122..00000000 --- a/meta-fri2/recipes-bsp/formfactor/formfactor/fri2-noemgd/machconfig +++ /dev/null @@ -1,3 +0,0 @@ -# Assume a USB mouse and keyboard are connected -HAVE_TOUCHSCREEN=0 -HAVE_KEYBOARD=1 diff --git a/meta-fri2/recipes-bsp/formfactor/formfactor_0.0.bbappend b/meta-fri2/recipes-bsp/formfactor/formfactor_0.0.bbappend deleted file mode 100644 index 72d991c7..00000000 --- a/meta-fri2/recipes-bsp/formfactor/formfactor_0.0.bbappend +++ /dev/null @@ -1 +0,0 @@ -FILESEXTRAPATHS_prepend := "${THISDIR}/${PN}:" diff --git a/meta-fri2/recipes-bsp/grub/grub-efi_2.00.bbappend b/meta-fri2/recipes-bsp/grub/grub-efi_2.00.bbappend deleted file mode 100644 index f6105711..00000000 --- a/meta-fri2/recipes-bsp/grub/grub-efi_2.00.bbappend +++ /dev/null @@ -1,13 +0,0 @@ -# The Intel provided Fast Boot Firmware may not initialize the USB keyboard -# before launching the grub.efi payload. Ensure GRUB has keyboard control by -# building in the usb, usb_keyboard, and ohci modules. - -do_deploy() { - # Search for the grub.cfg on the local boot media by using the - # built in cfg file provided via this recipe - grub-mkimage -c ../cfg -p /EFI/BOOT -d ./grub-core/ \ - -O ${GRUB_TARGET}-efi -o ./${GRUB_IMAGE} \ - boot linux ext2 fat serial part_msdos part_gpt normal efi_gop iso9660 search \ - usb usb_keyboard ohci - install -m 644 ${B}/${GRUB_IMAGE} ${DEPLOYDIR} -} diff --git a/meta-fri2/recipes-core/init-ifupdown/files/fri2-noemgd/interfaces b/meta-fri2/recipes-core/init-ifupdown/files/fri2-noemgd/interfaces deleted file mode 100644 index f5bb9468..00000000 --- a/meta-fri2/recipes-core/init-ifupdown/files/fri2-noemgd/interfaces +++ /dev/null @@ -1,9 +0,0 @@ -# /etc/network/interfaces -- configuration file for ifup(8), ifdown(8) - -# The loopback interface -auto lo -iface lo inet loopback - -# Wired or wireless interfaces -auto eth0 -iface eth0 inet dhcp diff --git a/meta-fri2/recipes-core/init-ifupdown/init-ifupdown_1.0.bbappend b/meta-fri2/recipes-core/init-ifupdown/init-ifupdown_1.0.bbappend deleted file mode 100644 index 81fe7b79..00000000 --- a/meta-fri2/recipes-core/init-ifupdown/init-ifupdown_1.0.bbappend +++ /dev/null @@ -1 +0,0 @@ -FILESEXTRAPATHS_prepend := "${THISDIR}/files:" diff --git a/meta-fri2/recipes-kernel/kmod/kmod_git.bbappend b/meta-fri2/recipes-kernel/kmod/kmod_git.bbappend deleted file mode 100644 index 56d8fcb0..00000000 --- a/meta-fri2/recipes-kernel/kmod/kmod_git.bbappend +++ /dev/null @@ -1,3 +0,0 @@ -do_install_append () { - echo "blacklist gma500_gfx" > ${D}${sysconfdir}/modprobe.d/prohibit_gma500_gfx.conf -} -- cgit v1.2.3-54-g00ecf