From daa587ed5c950cdcbc3a4b2561fb92209c0784ec Mon Sep 17 00:00:00 2001 From: Jianxun Zhang Date: Wed, 3 Aug 2016 11:04:15 -0700 Subject: EFI installer: Deploy board-specific data and kernel cmdline Extend the existing init-install-efi.sh in OE to call RMC tool so that it can deploy file blobs and a global kernel cmdline fragment associated to the type of current running board. At first, it tries to retrieve a special configuration file INSTALLER.CONFIG associated to the board from RMC database file on ESP. If the config file is fetched successfully, installer parses configuration file to know which file blobs should be deployed from database to target, also with other necessary information like FS attributes of deployed file. If a rule in config file is to create a directory, installer creates it accordingly. Developer must direct installer to create new directory first if destination of a file is in that directory by adding a '/' at the end of a line. The below is an example of INSTALLER.CONFIG. It directs installer to deploy a boot entry boot.conf to EFI partition, create a directory /etc/mylib/ on target's rootfs, and deploy a config file mylib.conf in the created directory. The first several lines started with '#' are comment. efi_entry_dir:root:disk:770:/boot/loader/entries/ boot.conf:root:disk:770:/boot/loader/entries/rmcboot.conf mylibdir:root:root:770:/tgt_root/etc/mylib/ mylib.conf:root:root:660:/tgt_root/etc/mylib/mylib.conf When installer cannot get config file for the type of running board, it skips any board-specific deployment. If a command fails at any step, installer simply moves to the next. After all the boot entries are deployed, installer seeks a config file KBOOTPARAM from RMC database file. In success, it appends the content of KBOOTPARAM to the end of kernel command line of every deployed entry. KBOOTPARAM works as a global kernel command line fragment specific to the type of running board. The installer is copied and modified from OE: ./recipes-core/initrdscripts/files/init-install-efi.sh: (OE-Core rev: 031c2f6ced917a81b4f39dca371773d0275ddf73) Signed-off-by: Jianxun Zhang Reviewed-by: Saul Wold Signed-off-by: Tom Zanussi --- .../initrdscripts/files/init-install-efi.sh | 326 +++++++++++++++++++++ .../initramfs-live-install-efi_%.bbappend | 1 + 2 files changed, 327 insertions(+) create mode 100644 common/recipes-core/initrdscripts/files/init-install-efi.sh create mode 100644 common/recipes-core/initrdscripts/initramfs-live-install-efi_%.bbappend (limited to 'common') diff --git a/common/recipes-core/initrdscripts/files/init-install-efi.sh b/common/recipes-core/initrdscripts/files/init-install-efi.sh new file mode 100644 index 00000000..e12a9d21 --- /dev/null +++ b/common/recipes-core/initrdscripts/files/init-install-efi.sh @@ -0,0 +1,326 @@ +#!/bin/sh -e +# +# Copyright (c) 2016, Intel Corporation. +# All rights reserved. +# +# install.sh [device_name] [rootfs_name] +# +# This file is a copy of file with same name in OE: +# meta/recipes-core/initrdscripts/files/. We modify +# it for RMC feature to deploy file blobs from RMC +# database file to target. + +PATH=/sbin:/bin:/usr/sbin:/usr/bin + +# We need 20 Mb for the boot partition +boot_size=20 + +# 5% for swap +swap_ratio=5 + +# Get a list of hard drives +hdnamelist="" +live_dev_name=`cat /proc/mounts | grep ${1%/} | awk '{print $1}'` +live_dev_name=${live_dev_name#\/dev/} +# Only strip the digit identifier if the device is not an mmc +case $live_dev_name in + mmcblk*) + ;; + *) + live_dev_name=${live_dev_name%%[0-9]*} + ;; +esac + +echo "Searching for hard drives ..." + +for device in `ls /sys/block/`; do + case $device in + loop*) + # skip loop device + ;; + sr*) + # skip CDROM device + ;; + ram*) + # skip ram device + ;; + *) + # skip the device LiveOS is on + # Add valid hard drive name to the list + case $device in + $live_dev_name*) + # skip the device we are running from + ;; + *) + hdnamelist="$hdnamelist $device" + ;; + esac + ;; + esac +done + +if [ -z "${hdnamelist}" ]; then + echo "You need another device (besides the live device /dev/${live_dev_name}) to install the image. Installation aborted." + exit 1 +fi + +TARGET_DEVICE_NAME="" +for hdname in $hdnamelist; do + # Display found hard drives and their basic info + echo "-------------------------------" + echo /dev/$hdname + if [ -r /sys/block/$hdname/device/vendor ]; then + echo -n "VENDOR=" + cat /sys/block/$hdname/device/vendor + fi + if [ -r /sys/block/$hdname/device/model ]; then + echo -n "MODEL=" + cat /sys/block/$hdname/device/model + fi + if [ -r /sys/block/$hdname/device/uevent ]; then + echo -n "UEVENT=" + cat /sys/block/$hdname/device/uevent + fi + echo +done + +# Get user choice +while true; do + echo "Please select an install target or press n to exit ($hdnamelist ): " + read answer + if [ "$answer" = "n" ]; then + echo "Installation manually aborted." + exit 1 + fi + for hdname in $hdnamelist; do + if [ "$answer" = "$hdname" ]; then + TARGET_DEVICE_NAME=$answer + break + fi + done + if [ -n "$TARGET_DEVICE_NAME" ]; then + break + fi +done + +if [ -n "$TARGET_DEVICE_NAME" ]; then + echo "Installing image on /dev/$TARGET_DEVICE_NAME ..." +else + echo "No hard drive selected. Installation aborted." + exit 1 +fi + +device=/dev/$TARGET_DEVICE_NAME + +# +# The udev automounter can cause pain here, kill it +# +rm -f /etc/udev/rules.d/automount.rules +rm -f /etc/udev/scripts/mount* + +# +# Unmount anything the automounter had mounted +# +umount ${device}* 2> /dev/null || /bin/true + +mkdir -p /tmp + +# Create /etc/mtab if not present +if [ ! -e /etc/mtab ]; then + cat /proc/mounts > /etc/mtab +fi + +disk_size=$(parted ${device} unit mb print | grep '^Disk .*: .*MB' | cut -d" " -f 3 | sed -e "s/MB//") + +swap_size=$((disk_size*swap_ratio/100)) +rootfs_size=$((disk_size-boot_size-swap_size)) + +rootfs_start=$((boot_size)) +rootfs_end=$((rootfs_start+rootfs_size)) +swap_start=$((rootfs_end)) + +# MMC devices are special in a couple of ways +# 1) they use a partition prefix character 'p' +# 2) they are detected asynchronously (need rootwait) +rootwait="" +part_prefix="" +if [ ! "${device#/dev/mmcblk}" = "${device}" ]; then + part_prefix="p" + rootwait="rootwait" +fi +bootfs=${device}${part_prefix}1 +rootfs=${device}${part_prefix}2 +swap=${device}${part_prefix}3 + +echo "*****************" +echo "Boot partition size: $boot_size MB ($bootfs)" +echo "Rootfs partition size: $rootfs_size MB ($rootfs)" +echo "Swap partition size: $swap_size MB ($swap)" +echo "*****************" +echo "Deleting partition table on ${device} ..." +dd if=/dev/zero of=${device} bs=512 count=35 + +echo "Creating new partition table on ${device} ..." +parted ${device} mklabel gpt + +echo "Creating boot partition on $bootfs" +parted ${device} mkpart boot fat32 0% $boot_size +parted ${device} set 1 boot on + +echo "Creating rootfs partition on $rootfs" +parted ${device} mkpart root ext3 $rootfs_start $rootfs_end + +echo "Creating swap partition on $swap" +parted ${device} mkpart swap linux-swap $swap_start 100% + +parted ${device} print + +echo "Formatting $bootfs to vfat..." +mkfs.vfat $bootfs + +echo "Formatting $rootfs to ext3..." +mkfs.ext3 $rootfs + +echo "Formatting swap partition...($swap)" +mkswap $swap + +mkdir /tgt_root +mkdir /src_root +mkdir -p /boot + +# Handling of the target root partition +mount $rootfs /tgt_root +mount -o rw,loop,noatime,nodiratime /run/media/$1/$2 /src_root +echo "Copying rootfs files..." +cp -a /src_root/* /tgt_root +if [ -d /tgt_root/etc/ ] ; then + boot_uuid=$(blkid -o value -s UUID ${bootfs}) + swap_part_uuid=$(blkid -o value -s PARTUUID ${swap}) + echo "/dev/disk/by-partuuid/$swap_part_uuid swap swap defaults 0 0" >> /tgt_root/etc/fstab + echo "UUID=$boot_uuid /boot vfat defaults 1 2" >> /tgt_root/etc/fstab + # We dont want udev to mount our root device while we're booting... + if [ -d /tgt_root/etc/udev/ ] ; then + echo "${device}" >> /tgt_root/etc/udev/mount.blacklist + fi +fi + +# Handling of the target boot partition +mount $bootfs /boot +echo "Preparing boot partition..." + +# RMC deployment +RMC_CMD=/src_root/usr/bin/rmc +RMC_DB=/run/media/$1/rmc.db + +EFIDIR="/boot/EFI/BOOT" +mkdir -p $EFIDIR + +# Copy the efi loader +cp /run/media/$1/EFI/BOOT/*.efi $EFIDIR + +# We only support gummiboot/systemd-boot. Leave grub-efi not changed. +if [ -d /run/media/$1/loader ]; then + # copy config files for gummiboot + cp -dr /run/media/$1/loader /boot +fi + +# We don't want to quit when a step failed. For example, +# a file system could not support some operations. +set +e + +if [ -f "${RMC_DB}" ] && [ -f "${RMC_CMD}" ]; then + echo "Found RMC database and tool, start RMC deployment" + # query INSTALLER.CONFIG from RMC DB + if ${RMC_CMD} -B INSTALLER.CONFIG -d "${RMC_DB}" -o /tmp/installer.config; then + while IFS=':' read -r NAME TGT_UID TGT_GID TGT_MODE TGT_PATH; do + # skip comment + # The regexp in grep works with busybox grep which doesn't + # seem to have a -P to recognize '\t'. But this expression could not + # work with gnu grep... + if echo "$NAME"|grep -q $'^[ \t]*#'; then + continue + fi + # check if we should create a directory (last char in target path is '/') + # or deploy a file + LAST_CHAR=$(echo "${TGT_PATH:$((${#TGT_PATH}-1)):1}") + + # Do not bail out for failures but user should get stderr message + if [ ${LAST_CHAR} = "/" ]; then + # name field is skipped for directory + echo "DIR: ${TGT_UID}:${TGT_GID}:${TGT_MODE} => ${TGT_PATH}" + mkdir -p "$TGT_PATH" + chown "${TGT_UID}:${TGT_GID}" "$TGT_PATH" + chmod "${TGT_MODE}" "$TGT_PATH" + else + ${RMC_CMD} -B "${NAME}" -d "${RMC_DB}" -o "${TGT_PATH}" + echo "FILE: ${NAME}:${TGT_UID}:${TGT_GID}:${TGT_MODE} => ${TGT_PATH}" + chown "${TGT_UID}:${TGT_GID}" "$TGT_PATH" + chmod "${TGT_MODE}" "$TGT_PATH" + fi + done < /tmp/installer.config + rm -rf /tmp/installer.config + + # remove rmc from target since we don't think it is a valid + # case to run rmc after installation. + rm -rf /tgt_root/usr/bin/rmc + echo "RMC deployment finished" + else + echo "INSTALLER.CONFIG is not found, skip RMC deployment" + fi +fi +set -e + +if [ -f /run/media/$1/EFI/BOOT/grub.cfg ]; then + root_part_uuid=$(blkid -o value -s PARTUUID ${rootfs}) + GRUBCFG="$EFIDIR/grub.cfg" + cp /run/media/$1/EFI/BOOT/grub.cfg $GRUBCFG + # Update grub config for the installed image + # Delete the install entry + sed -i "/menuentry 'install'/,/^}/d" $GRUBCFG + # Delete the initrd lines + sed -i "/initrd /d" $GRUBCFG + # Delete any LABEL= strings + sed -i "s/ LABEL=[^ ]*/ /" $GRUBCFG + # Delete any root= strings + sed -i "s/ root=[^ ]*/ /g" $GRUBCFG + # Add the root= and other standard boot options + sed -i "s@linux /vmlinuz *@linux /vmlinuz root=PARTUUID=$root_part_uuid rw $rootwait quiet @" $GRUBCFG +fi + +if [ -d /run/media/$1/loader ]; then + rootuuid=$(blkid -o value -s PARTUUID ${rootfs}) + GUMMIBOOT_CFGS="/boot/loader/entries/*.conf" + # delete the install entry + # fixme: If RMC did deploy install.conf at previous steps, it is purged here... + rm -f /boot/loader/entries/install.conf + # delete the initrd lines + sed -i "/initrd /d" $GUMMIBOOT_CFGS + # delete any LABEL= strings + sed -i "s/ LABEL=[^ ]*/ /" $GUMMIBOOT_CFGS + # delete any root= strings + sed -i "s/ root=[^ ]*/ /" $GUMMIBOOT_CFGS + # add the root= and other standard boot options + sed -i "s@options *@options root=PARTUUID=$rootuuid rw $rootwait quiet @" $GUMMIBOOT_CFGS + # if RMC feature presents, append global kernel command line fragment when it exists. + if [ -f "${RMC_DB}" ] && [ -f "${RMC_CMD}" ]; then + if ${RMC_CMD} -B KBOOTPARAM -d "${RMC_DB}" -o /tmp/kbootparam; then + sed -i "/^[ \t]*options/ s/$/ $(cat /tmp/kbootparam)/" $GUMMIBOOT_CFGS + rm /tmp/kbootparam + fi + fi +fi + +cp /run/media/$1/vmlinuz /boot + +umount /src_root +umount /tgt_root +umount /boot + +sync + +echo "Remove your installation media, and press ENTER" + +read enter + +echo "Rebooting..." +reboot -f diff --git a/common/recipes-core/initrdscripts/initramfs-live-install-efi_%.bbappend b/common/recipes-core/initrdscripts/initramfs-live-install-efi_%.bbappend new file mode 100644 index 00000000..81fe7b79 --- /dev/null +++ b/common/recipes-core/initrdscripts/initramfs-live-install-efi_%.bbappend @@ -0,0 +1 @@ +FILESEXTRAPATHS_prepend := "${THISDIR}/files:" -- cgit v1.2.3-54-g00ecf