| Commit message (Collapse) | Author | Age | Files | Lines |
|
|
|
|
|
|
|
| |
Backported fixes from upstream dpdk sources to
ensure dpdk 1.8.0 compiles against kernel 4.1.
Signed-off-by: Anuj Mittal <anujx.mittal@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
|
|
|
|
|
|
| |
Backported fixes from upstream dpdk sources
to ensure dpdk 2.0.0 compiles against kernel 4.1.
Signed-off-by: Anuj Mittal <anujx.mittal@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Remove meta-romley BSP layer from meta-intel master branch
which is targeting for YP 2.0.
A heads-up email was sent to the meta-intel mailing list for
requesting any feedback regarding retirement of these BSP.
Since there is no concern, we assume that it is agreed upon
and thus this patch to retire the BSP.
The "MAINTAINERS file" and "conf/machine/README file" are updated to
reflect removal of the BSP.
We expect intel-corei7-64 machine is continued to be used to support
the platform and dpdk recipe under meta-romley is now supported under
meta-isg/common/recipes-extended/dpdk.
Signed-off-by: WU CHIA CHUAN <chia.chuan.wu@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
|
|
|
|
|
|
| |
This adds the recipe for dpdk v2.1.0 for grantley platforms
based on common intel-corei7-64 BSP.
Signed-off-by: Anuj Mittal <anujx.mittal@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
|
|
|
|
|
|
|
|
|
| |
Add intel-corei7-64 as a compatible machine in addition
to crystalforest.
This is in line with the move to intel common BSP for all
supported platforms.
Signed-off-by: Anuj Mittal <anujx.mittal@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
|
|
|
|
|
|
|
|
|
|
| |
Move the inclusion of patch:
dpdk-1.8.0-and-2.0.0-examples-add-config-variable-to-enable-disable-dpdk.patch
from dpdk.inc to version specific dpdk bb files where it needs to be applied.
This patch doesn't apply cleanly on top of dpdk v2.1.
Signed-off-by: Anuj Mittal <anujx.mittal@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Make sure that we check for the right qat package when
enabling dpdk_qat example.
The qat package name has been changed to "virtual/qat"
to enable switching between different/future versions of qat
for supported platforms.
The preferred version of "virtual/qat" can be set in machine
conf when some other version, besides qat16, becomes available
and needs to be supported.
Signed-off-by: Anuj Mittal <anujx.mittal@intel.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
|
|
|
|
|
|
|
|
|
|
|
| |
Make sure that the dpdk_qat example app builds okay
when enabled using PACKAGECONFIG ?= " dpdk_qat".
Added a patch to dpdk_qat makefile to point to correct location
of qat libs and headers.
Signed-off-by: Anuj Mittal <anujx.mittal@intel.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
|
|
|
|
|
|
|
|
| |
dpdk v2.0.0 required "CONFIG_RTE_IP_FRAG=y" in order to build
ip_fragmentation application.
Signed-off-by: WU CHIA CHUAN <chia.chuan.wu@intel.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This patch fixes issue in build configuration variables that were
not correctly parsed by do_configure() task.The environment variables
are not evaluated because the config files under dpdk/config/ folder
are not parsed by Makefile but instead by cpp compiler.
Reported-by: Anuj Mittal <anujx.mittal@intel.com>
Signed-off-by: Ong Boon Leong <boon.leong.ong@intel.com>
Signed-off-by: WU CHIA CHUAN <chia.chuan.wu@intel.com>
Tested-by: WU CHIA CHUAN <chia.chuan.wu@intel.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
|
|
|
|
|
|
|
|
|
| |
This patch tidy up dpdk.inc and removing unnecessary patches.
Integrating common recipe from dpdk_1.8.0.bb and dpdk_2.0.0.bb.
Signed-off-by: Ong Boon Leong <boon.leong.ong@intel.com>
Signed-off-by: WU CHIA CHUAN <chia.chuan.wu@intel.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
|
|
|
|
|
|
|
|
|
| |
This patch makes reference to early dpdk meta-data implementation
and extends it to support DPDK v2.0.0.
Signed-off-by: WU CHIA CHUAN <chia.chuan.wu@intel.com>
Signed-off-by: Ong Boon Leong <boon.leong.ong@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
|
|
|
|
|
|
|
|
|
| |
applications
Introduce a patch to enable/disable the vhost and ip_fragmentation examples applications
under common_linuxapp config file. The flag introduce is controlled by PACKAGECONFIG.
Signed-off-by: WU CHIA CHUAN <chia.chuan.wu@intel.com>
Signed-off-by: Ong Boon Leong <boon.leong.ong@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
|
|
|
|
|
|
|
| |
For patches which are common to DPDK v1.8 and DPDK v2.0, they are renamed to
following file naming format for clarity dpdk-1.8.0-and-2.0.0*.patch.
Signed-off-by: WU CHIA CHUAN <chia.chuan.wu@intel.com>
Signed-off-by: Ong Boon Leong <boon.leong.ong@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
|
|
|
|
|
|
|
|
|
| |
dpdk_1.8.0.bb
dpdk.inc is common to dpdk_1.8.0.bb and dpdk_2.0.0.bb, since DPDK v2.0 is no longer have
hostapp directory, so we only perform hostapp installation for DPDK v1.8.
Signed-off-by: WU CHIA CHUAN <chia.chuan.wu@intel.com>
Signed-off-by: Ong Boon Leong <boon.leong.ong@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
|
|
|
|
|
|
| |
Extract out common meta-data from dpdk_1.8.0.bb into dpdk.inc for better
scalability into future dpdk.
Signed-off-by: Ong Boon Leong <boon.leong.ong@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This patch adds the support for DPDK v1.8.0 from dpdk.org.
It introduces PACKAGECONFIG options for enabling Virtualization Technology
and QuickAssiste Technology with DPDK.
There is couple of additional DPDK Makefile & config patches to enable
PACKAGECONFIG said above.
Signed-off-by: Ong Boon Leong <boon.leong.ong@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
|
|
|
|
|
|
|
|
|
| |
DPDK default config set the TARGET machine type to native which is
incorrect. The SDK assumes that the DPDK package is built and installed
natively. So, to support cross-compilation uses, we add DPDK_TARGET_MACH
option here. This variable should be defined at either dpdk bb or bbappend
file.
Signed-off-by: Ong Boon Leong <boon.leong.ong@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
|
|
|
|
|
|
|
|
| |
DPDK v1.8.0 app Makefile does not support "--sysroot=<path>" option
in LDFLAGS because of Makefile internal logic that always add -Wl, before.
This causes poky GNU linker search path issue for target machine sysroot
usr/lib.
Signed-off-by: Ong Boon Leong <boon.leong.ong@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
|
|
|
|
|
|
|
| |
DPDK v1.8.0 has some change made on app makefile that breaks dpdk.inc
may on passing in EXTRA_CFLAGS AND EXTRA_LDFLAGS. So this patch
re-tune the dpdk.inc to align to the change.
Signed-off-by: Ong Boon Leong <boon.leong.ong@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
|
|
|
|
|
|
| |
Introduce two patches to enable DPDK config file to support PACKAGECONFIG
options for QAT, vhost and libvirt.
Signed-off-by: Ong Boon Leong <boon.leong.ong@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
|
|
|
|
|
|
| |
Starting form YPv1.8.y onwards, the kernel build output is separately kept
under work-shared.
Signed-off-by: Ong Boon Leong <boon.leong.ong@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
DPDK software builds external kernel modules igb_uio.ko, rte_kni.ko & etc that
depend on the availability of kernel source. With splitting of kernel source
and artifacts into separate fodlers under tmp/work-shared, we need to handle
this by introducing do_configure[depends] += "virtual/kernel:do_shared_workdir"
to ensure build dependency is satisfied.
Refer to poky 46cdaf1 kernel: move source and build output to work-shared
This patch also introduces RTE_KERNELDIR_OUT variable to be used to setup
the kernel build artifact path. RTE_KERNELDIR remains as the kernel source path.
Signed-off-by: Ong Boon Leong <boon.leong.ong@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
|
|
|
|
|
|
|
|
| |
Starting from DPDK v1.8 onwards, there is name change from
include/arch to include/generic under build directory. So to cater
for such change, we introduce ARCHDIR variable. This variable should
be set under individual version of dpdk recipe.
Signed-off-by: Ong Boon Leong <boon.leong.ong@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
do_install() has been non-scalable due to different DPDK SW releases
offer increasingly more examples. So, this patch is intended to make
the do_install() simplified by using regular expression technique to
extract out executables name that are built.
Tested this patch with DPDK v1.6.0r2 and v1.7.0 and the software packages
look intact.
Signed-off-by: Ong Boon Leong <boon.leong.ong@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
(cherry picked from commit a43871c39ae462647ebe58679b92cd34c8ae48a6)
Signed-off-by: Ong Boon Leong <boon.leong.ong@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
Added include file dpdk.inc to share common functionality based on
dpdk_1.6.0r2
Added a new variable EXAMPLE_BUILD_DIR. This points to apps build
directory which is different in dpdk v1.6.0r2 and v1.7.0.
Users of dpdk.inc have to define EXAMPLE_BUILD_DIR for the
installation of example apps.
This recipe is cherry-picked from branch dizzy and the commit ID:
1c825a06095178c0c51f28d5867549feac8a47f4:meta-intel/common: Add include file for DPDK
Signed-off-by: venkatasubramanian pattu <venkatasubramanianx.pattu@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
(cherry picked from commit 578494c0c4715bb8d24972fa52850e89c36410a1)
Signed-off-by: Ong Boon Leong <boon.leong.ong@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|