diff options
author | Nitin A Kamble <nitin.a.kamble@intel.com> | 2014-03-12 12:12:32 -0700 |
---|---|---|
committer | Tom Zanussi <tom.zanussi@intel.com> | 2014-03-26 22:41:49 -0500 |
commit | 8d79fb4e0cec07fe05ca440578414eaa6be80a3a (patch) | |
tree | 067a7cc91fcd612e9d9797900378970f010f838f /meta-n450/README | |
parent | a1491bc54b60a1c622a9060756fd9b145bc01378 (diff) | |
download | meta-intel-8d79fb4e0cec07fe05ca440578414eaa6be80a3a.tar.gz |
Remove chiefriver, sys940x & n450 BSPs
Configuration for the chiefriver, sys940x, sys940x-noemgd, n450 BSPs are
deleted. The consolidated BSPs viz intel-corei7-64 and intel-core2-32
support these boards.
As part of the usual retirement process, a heads-up email was sent to the
meta-intel mailing list requesting any feedback regarding retirement of
these BSPs. The community did not had any concerning feedback to
reconsider the retirement decision.
The MAINTAINERS file and the layer version of the meta-intel layer are
updated to reflect removal of the BSPs.
Signed-off-by: Nitin A Kamble <nitin.a.kamble@intel.com>
CC: Darren Hart <dvhart@linux.intel.com>
Reviewed-by: Darren Hart <dvhart@linux.intel.com>
Diffstat (limited to 'meta-n450/README')
-rw-r--r-- | meta-n450/README | 134 |
1 files changed, 0 insertions, 134 deletions
diff --git a/meta-n450/README b/meta-n450/README deleted file mode 100644 index 2f652dbb..00000000 --- a/meta-n450/README +++ /dev/null | |||
@@ -1,134 +0,0 @@ | |||
1 | This README file contains information on building the meta-n450 | ||
2 | BSP layer, and booting the images contained in the /binary directory. | ||
3 | Please see the corresponding sections below for details. | ||
4 | |||
5 | The Luna Pier platform consists of the Intel Atom E4xx processor (Pineview), | ||
6 | plus the Intel 82801Hm I/O Controller. | ||
7 | |||
8 | Further information on the platforms supported by this BSP can be | ||
9 | found here: | ||
10 | |||
11 | http://www.intel.com/p/en_US/embedded/hwsw/hardware/atom-400-500/overview | ||
12 | |||
13 | Information on all IntelĀ® embedded platforms can be found here: | ||
14 | |||
15 | http://www.intel.com/p/en_US/embedded/hwsw/hardware | ||
16 | |||
17 | |||
18 | Yocto Project Compatible | ||
19 | ======================== | ||
20 | |||
21 | This BSP is compatible with the Yocto Project as per the requirements | ||
22 | listed here: | ||
23 | |||
24 | https://www.yoctoproject.org/webform/yocto-project-compatible-registration | ||
25 | |||
26 | |||
27 | Dependencies | ||
28 | ============ | ||
29 | |||
30 | This layer depends on: | ||
31 | |||
32 | URI: git://git.openembedded.org/bitbake | ||
33 | branch: master | ||
34 | |||
35 | URI: git://git.openembedded.org/openembedded-core | ||
36 | layers: meta | ||
37 | branch: master | ||
38 | |||
39 | URI: git://git.yoctoproject.org/meta-intel | ||
40 | layers: intel | ||
41 | branch: master | ||
42 | |||
43 | |||
44 | Patches | ||
45 | ======= | ||
46 | |||
47 | Please submit any patches against this BSP to the Yocto mailing list | ||
48 | (yocto@yoctoproject.org) and cc: the maintainer: | ||
49 | |||
50 | Maintainer: Darren Hart <dvhart@linux.intel.com> | ||
51 | |||
52 | Please see the meta-intel/MAINTAINERS file for more details. | ||
53 | |||
54 | |||
55 | Table of Contents | ||
56 | ================= | ||
57 | |||
58 | I. Building the meta-n450 BSP layer | ||
59 | II. Booting the images in /binary | ||
60 | |||
61 | |||
62 | I. Building the meta-n450 BSP layer | ||
63 | ======================================= | ||
64 | |||
65 | In order to build an image with BSP support for a given release, you | ||
66 | need to download the corresponding BSP tarball from the 'Board Support | ||
67 | Package (BSP) Downloads' page of the Yocto Project website. | ||
68 | |||
69 | Having done that, and assuming you extracted the BSP tarball contents | ||
70 | at the top-level of your yocto build tree, you can build an n450 | ||
71 | image by adding the location of the meta-n450 layer to | ||
72 | bblayers.conf, along with the meta-intel layer itself (to access | ||
73 | common metadata shared between BSPs) e.g.: | ||
74 | |||
75 | yocto/meta-intel \ | ||
76 | yocto/meta-intel/meta-n450 \ | ||
77 | |||
78 | Configure your build to build for the n450 machine in your local.conf file: | ||
79 | |||
80 | MACHINE ?= "n450" | ||
81 | |||
82 | You should then be able to build an n450 image as such: | ||
83 | |||
84 | $ bitbake core-image-sato | ||
85 | |||
86 | At the end of a successful build, you should have a live image that | ||
87 | you can boot from a USB flash drive (see instructions on how to do | ||
88 | that below, in the section 'Booting the images from /binary'). | ||
89 | |||
90 | As an alternative to downloading the BSP tarball, you can also work | ||
91 | directly from the meta-intel git repository. For each BSP in the | ||
92 | 'meta-intel' repository, there are multiple branches, one | ||
93 | corresponding to each major release starting with 'laverne' (0.90), in | ||
94 | addition to the latest code which tracks the current master (note that | ||
95 | not all BSPs are present in every release). Instead of extracting | ||
96 | a BSP tarball at the top level of your yocto build tree, you can | ||
97 | equivalently check out the appropriate branch from the meta-intel | ||
98 | repository at the same location. | ||
99 | |||
100 | |||
101 | II. Booting the images in /binary | ||
102 | ================================= | ||
103 | |||
104 | This BSP contains bootable live images, which can be used to directly | ||
105 | boot Yocto off of a USB flash drive. | ||
106 | |||
107 | Under Linux, insert a USB flash drive. Assuming the USB flash drive | ||
108 | takes device /dev/sdf, use dd to copy the live image to it. For | ||
109 | example: | ||
110 | |||
111 | # dd if=core-image-sato-n450.hddimg of=/dev/sdf | ||
112 | # sync | ||
113 | # eject /dev/sdf | ||
114 | |||
115 | This should give you a bootable USB flash device. Insert the device | ||
116 | into a bootable USB socket on the target, and power on. This should | ||
117 | result in a system booted to the Sato graphical desktop. | ||
118 | |||
119 | If you want a terminal, use the arrows at the top of the UI to move to | ||
120 | different pages of available applications, one of which is named | ||
121 | 'Terminal'. Clicking that should give you a root terminal. | ||
122 | |||
123 | If you want to ssh into the system, you can use the root terminal to | ||
124 | ifconfig the IP address and use that to ssh in. The root password is | ||
125 | empty, so to log in type 'root' for the user name and hit 'Enter' at | ||
126 | the Password prompt: and you should be in. | ||
127 | |||
128 | ---- | ||
129 | |||
130 | If you find you're getting corrupt images on the USB (it doesn't show | ||
131 | the syslinux boot: prompt, or the boot: prompt contains strange | ||
132 | characters), try doing this first: | ||
133 | |||
134 | # dd if=/dev/zero of=/dev/sdf bs=1M count=512 | ||