| Commit message (Collapse) | Author | Age | Files | Lines |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This backports following changes from 2015.07 development release:
10aced3 thermal: imx_thermal: use CPU temperature grade for trip points
b02bbe4 imx: mx6: add display of CPU temperature grade in print_cpuinfo()
959d59a imx: mx6: add get_cpu_temp_grade to obtain cpu temperature grade from OTP
133492b imx: mx6: display max cpu frequency in print_cpuinfo()
b1a9761 imx: mx6: add get_cpu_speed_grade_hz func to return MHz speed grade from OTP
ac4fa5f mx6: add OTP bank1 registers
982b630 arm: mx6: ddr: set fast-exit on DDR3 if pd_fast_exit specified
c462c40 arm/imx-common: Fix warning 'get_reset_cause' defined but not used
666a3df pmic: pfuze100 fix typo
2216998 imx: mx6sx enable SION for i2c pin mux
019f86c imx: marsboard: Enable thermal DM support
386878a imx: riotboard: Enable thermal DM support
0e80b68 imx: riotboard, marsboard: Enable thermal support
bf9a6d7 hummingboard: Remove unused directory
c46ff16 imx: ventana: add pmic_setup to SPL
d12faa5 imx: ventana: (cosmetic) clean up size defines for improved readability
86f9770 imx: ventana: config: use MMC SPL RAW support
c52aa2e env_nand: use nand_spl_load_image for readenv if SPL
5559f42 imx: ventana: use stack relocation
cd10311 imx: ventana: add GSC boot watchdog disable to SPL
079ca00 imx: ventana: add gpio setup to SPL
484f580 imx: ventana: use common uart and i2c setup functions in SPL
3dcd603 imx: ventana: detect pmic using i2c probe instead of board model
32f01d2 imx: ventana: move GSC boot watchdog disable function to gsc.c
defe0e8 imx: ventana: split out common functions between SPL and uboot
7a22259 imx: ventana: default msata/pci mux to pci before PCI enumeration
e2e0076 imx: ventana: fix pcie reset for GW522x
265e3fb imx: ventana: config: enable Thermal support
a8c94f9 imx: ventana: enable DM_SERIAL
a4f84a5 imx: ventana: register gpio's with gpio_request
872b1ae imx: ventana: config: enable driver model
6f94cad imx: ventana: config: enable gpio command
e574abe imx: ventana: display SPL boot device
31da35f imx: ventana: set dtype env var to boot media
ebec986 arm: mx6: ddr3: Remove dead code
d2249d2 i2c, mxc: rework i2c base address names for different SoCs
9c4a63b arm, imx6, i2c: add I2C4 for MX6DL
f27f41c mx6: Set shared override bit in PL310 AUX_CTRL register
143286c tbs2910: add CONFIG_SUPPORT_EMMC_BOOT
0104511 tbs2910: use default CONFIG_SYS_PBSIZE
6358e0b tbs2910: only enable vga output for stdout/stderr when hdmi detected
abce3a9 tbs2910: support for usb otg host mode
6d261b5 warp: README: Fix typo
5433284 imx: ventana: fix boot to SD
6219fb9 imx: dek_blob: Add explicit include for mapmem
57ffb41 bugfix i.mx6 pwm: prevent overflow of period_c * duty_ns
Change-Id: I4449a78c6f5ee86476894b146534b30d39a109cd
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This includes some backports of 2015.07-rc1 release which are related
to i.MX and Vybrid families. The backported changes are:
b16ec2d mx6cuboxi: Mention Cubox-i in the README
4cf36bf hummingboard: Remove mx6solo specific support
e767d87 mx6cuboxi: Skip usb initialization when booting without HDMI
6d87db5 mx6cuboxi: Pull down PAD_ENET_RXD0/RXD1
ef1be8d mx6cuboxi: Fix Ethernet PHY detection problem
c11bc28 logos: Add Solidrun's logo
df66a37 mx6cuboxi: Allow HDMI and USB keyboard to be stdout/stdin
43c9802 mx6cuboxi: Add USB host support
9403159 mx6cuboxi: Add HDMI output support
2ee593f Fix mxc_hab documenation
f1b4690 arm: mx6: Clamp MMDC and DDR3 clocks for timing calculations
8afedb2 colibri_vf: Enable USB support for Colibri Vybrid
1c322c8 usb: host: Add ehci-vf USB driver for ARM Vybrid SoC's
8f3b4af ARM: vf610: Initial integration for Colibri VF50/VF61
ec4acf4 ARM: vf610: Enable caches
d0b33b7 ARM: vf610: Add SoC and CPU type detection
6adfaab ARM: vf610: Enable external 32KHz oscillator
0cbdc08 ARM: vf610: Move DDR3 initialization to imx-common
dd995b9 Merge remote-tracking branch 'imx/master' into patches-2015.04
205d586 mx6cuboxi: Load the correct 'fdtfile' variable
6a305f2 mx6cuboxi: Use more standard namings for fdt variables
feb6cc5 mx6cuboxi: Differentiate Cubox-i and Hummingboard
8cb6817 mx6cuboxi: Introduce multi-SoC support
cfdcc5f mx6cuboxi: Prepare for multi SoC support
b684586 mx6cuboxi: Fix the defconfig name
f5e23aa unzip: add gzwrite command to write compressed image to block device
5b9f6a3 gunzip: add gzwrite routine for extracting compresed images to block device
120aea5 ARM: cm_fx6: use "select" instead of default value in defconfig
755bd40 ARM: mx6: use "select" instead of default value in defconfig
Change-Id: Ic3a0ecbd09e7a76d3ef732414184473a32952ac3
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The recipe is now restrict to the following SoC families:
- mxs
- mx3
- mx5
- mx6
- vf50
- vf60
Change-Id: I95e5de0e7007a1bbbae436e77fd39dc49dbd675e
Reported-by: Lauren Post <lauren.post@freescale.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This updates U-Boot 2015.04 version with some fixes and improvements
from 2015.07 release. Those are:
cba4c25 mx6sabresd: Remove uneeded ifdef
407be42 mx6sabresd: Fix SPL memory description
761bc19 nitrogen6x: allow gzipped bitmap display
1c29ad7 iMX: Fix compilation error when enabling SECURE_BOOT
6b396b3 arm: mx6: tqma6: Extract baseboard configs into separate config file
76962d0 power: pfuze100: fix LDO_EN bit value
9e2b0c2 imx: ventana: Update missing memory/calib handling
767d88b imx: ventana: Add new memory configuration
18b3a91 imx: ventana: set HDMI video in to yuv422bt656 for GW551x-A
a2559f1 imx: ventana: use hdmiinfmt env var to override HDMI capture format
e9fc6d1 imx: ventana: add DT fixup for GW522x to change PCIE_RST# GPIO
ee5931d imx: ventana: add 'gsc wd' command for enabling and disabling GSC watchdog
4569cd5 imx: ventana: added device-tree display configuration for LVDS displays
f02390b imx: ventana: add support for DLC-700JMGT4 and DLC-800FIGT3 LCD displays
9506970 imx: ventana: add DT fixup for GW54xx compatibility with older kernels
7f14c31 imx: ventana: remove 128x16 calibration (share with 128x32)
06edcb9 imx: ventana: updated 16bit DDR calibration
eeca451 imx: ventana: added DT fixup for GW551x-A video input
45af3f7 imx: ventana: gsc: add new hwmon rails
e732917 imx: ventana: add mem_mb dynamic env var
16e369f imx: ventana: remove GSC hwmon voltage rail min/max test
e2801a9 imx: ventana: update boot scripts to support ubifs boot vol
aec3761 imx: ventana: only pinmux FEC enet signals for boards using it
7c5cd42 imx: ventana: add wdis config for GW5520
0417169 imx: ventana: add usb_pgood_delay 2sec default
75f21e3 imx: ventana: Add support for GW551x
0c81b14 imx: ventana: disable IMX6 watchdogs on GW51xx RevA and RevB
1274bd2 imx: ventana: fix various sparse warnings
30dc880 imx: ventana: config: enable EXT4 filesystem read/write support
f6747cd imx: ventana: config: enable edid support
8cc25eb imx: ventana: config: Support ramdisk
9543e95 imx: ventana: config: add USB Mass Storage (ums) support
4717e13 imx: ventana: set LTC3676 PMIC to appropriate values per datasheet
b0b8334 imx: ventana: add support for 4Gb density mem devices with IMX6DL
29f0d6b imx: ventana: enable precharge power-down fast-exit mode
a51de27 imx: ventana: add usb_pcisel hwconfig support
3ee26ec imx: ventana: remove unused GPIO configuration
e806b22 imx: ventana: assign default ethprime dynamically
0a6ee03 imx: ventana: add i210 support
306568d imx: ventana: disable 4k tftp/nfs packets
b8ce6fe mx6: Add initial SPL support for HummingBoard-i2eX
08daa25 fdt: add new fdt_fixup_display function to configure display
78c5a18 arm: mx6: ddr: add pd_fast_exit flag to system information
32f9ef3 ARM: mxs: Get boot mode from OCRAM
Another change included is:
fb25693 Revert "embestmx6boards: convert to use config_distro_bootcmd.h"
Which has been necessary to allow RIoT Board to work out of box with
current SDCard layout used in meta-fsl-arm. Thanks to Nikolay Dimitrov
<picmaster@mail.bg> and Gary Thomas <gary@mlbassoc.com> for reporting
the issue.
Change-Id: I7d13baefcda8f68fb9be618ea1eb55fc96bce5c2
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The 2b3a8e87 has the 2015.04 final release merged. So the current set
of changes applied on top of the 2015.04 release are:
59e39d3 wandboard: Changed mmcroot variable so kernel 3.10.31 boots
48b8a98 iMX6: Change mmcroot to use fixed mmc block index for USDHC
2f1399e mx6sabresd: Use mmcblk0 for CONFIG_MMCROOT
b265496 embestmx6boards: Change default bootenv configuration
d8c2380 mx6sabresd: Use LDO dtb file until LDO bypass support is added
1556dde mx6slevk: Use LDO dtb file until LDO bypass support is added
Change-Id: I0b9d5b812c20809b35521ff6dab8e2dda50ddd3c
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
|
|
|
|
|
|
|
| |
mmdc: Change the mmdc tool granularity
mx6s_capture: Handle failure case when failed open video device.
hdcp: remove since requires package download in 3.14
Signed-off-by: Lauren Post <lauren.post@freescale.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
|
|
|
|
|
|
| |
License also changed from LAOP27 to LA_OPT_FSL_OPEN_3RD_PARTY_IP
Change-Id: I84da584f0bc74b2e330127599643a4b8dccae1b3
Signed-off-by: Lauren Post <lauren.post@freescale.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
|
|
|
| |
Signed-off-by: Lauren Post <lauren.post@freescale.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
|
|
|
|
|
|
|
|
| |
This upgrades the vpu firwmare to v3.1.1_r46063
Also license is now changed from LAOPT27 to
LA_OPT_FSL_OPEN_3RD_PARTY_IP
Signed-off-by: Lauren Post <lauren.post@freescale.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
|
|
|
|
|
|
| |
Include support for i.MX 6 DQ Sabre Auto CPU2 board
Bug fixes since 3.10.53-1.1.0 GA
Signed-off-by: Lauren Post <lauren.post@freescale.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
|
|
|
|
|
| |
This adds space before and after equal symbol.
Change-Id: If8f0f3a710730a67b473828889c3c07b51940393
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
|
|
|
|
|
|
|
| |
This updates the fork based on upcoming 2015.04 release. This is
currently based on 2015.04-rc5 tag and offers a very solid release for
start the tests for Yocto Project 1.8 release.
Change-Id: I15519ffc7a28411f850bcf8492d8e5fb981bec7c
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
|
|
|
|
|
|
|
|
| |
*fix the following error:
|couldn't open "/poky/build/tmp/work/ls1021aqds-poky-linux-gnueabi/u-boot-ls1/2014.07-r0/git/u-boot.bin": no such file or directory
(From OE-Core rev: eca277b0af9e0e29022f81f54c17bf24aec02232)
Signed-off-by: Chunrong Guo <B40290@freescale.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
|
|
|
| |
Change-Id: I1290d7b0279bc92c3c4e73af9d432c255d5e3cfb
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
|
|
|
|
|
|
| |
In order to support forks of the MCC kernel module, define the MCC
kernel module packages as virtual packages.
Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
|
|
|
|
|
|
|
| |
This patch introduces a new base SoC family "vf". The family includes
all Freescale Vybrid SoC based modules, which is the single core
(vf50/VF5xx) or dual core (vf60/VF6xx) variant.
Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This does the backport of following changes:
614dd54 mx5: fix get_reset_cause
2db5ec7 mx6slevk: Provide a proper pad configuration for OTG1_ID pin
32f9568 mx6sabre: Select CMD_EXT4 options
8fc3c92 mx6sabre: Enable User Mass Storage
f2e5464 board: tbs2910: Enable USB Mass Storage support
47d960e mx35: Fix boot hang by avoiding vector relocation
7827b39 mx31: Fix boot hang by avoiding vector relocation
be1165e mx25pdk: Turn on the LCD supply
777f0aa zmx25: Convert to generic board
646fb52 imx31_phycore: Convert to generic board
ff37ab6 mx31ads: Convert to generic board
e74b278 mmc: fsl_esdhc: Add support for DDR mode
Fixed [YOCTO: #7384]
Change-Id: I6eeb0a03a9909aea0157e57472780fe4ddbc04c1
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This backports following fixes from the upcoming U-Boot 2015.04:
5d0291f warp: Add User Mass Storage support
49ad0f1 warp: Select BOUNCE_BUFFER and CMD_EXT options
5a10751 cmd_usb_mass_storage: Remove extra 'ums' string in the usage text
dd00fe2 warp: Add initial WaRP Board support
b9b6996 imx: mx6sl: Extend USDHC SD2 pins to support 8-wire use
4a01af4 mmc: fsl_esdhc: Add support to force VSELECT set
11688e5 mmc: fsl_esdhc: Add CMD11 support to switch to 1.8V
c1b0c39 imx:mx6slevk implement power init board
996d2cb imx:mx6slevk add pmic and i2c configuration
509825c imx:mx6sl add I2c pad settings
9867962 nitrogen6x: set environment variable reset_cause
64a6057 ARM: i.MX: provide access to reset cause through get_imx_reset_cause()
d4c17e7 ot1200: add eeprom command to non-SPL build
7270ed6 cmd_eeprom: make it possible to define the used i2c bus
dadd721 ARM: imx6 Add WDOG3 for i.MX6SX
3f5ba06 ARM: imx6: disable bandgap self-bias after boot
Change-Id: I7a73b8722de1085ef93129c4e801617204d483e7
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This includes the following backports from the 2015.04 upcoming release:
6e66aed imx:mx6 set normal APS and standby PFM mode
7a5cac0 pmic: fix missing SWITCH_SIZE
f98e73a pmic:pfuze implement pmic_mode_init
d79d747 mx53loco: Fix boot hang during reboot stress test
a5fb3c4 arm: mxs: Add 'Wait for JTAG user' if booted in JTAG mode
685ec23 arm: mxs: Enable booting of mx28 without battery
19161e5 arm: mxs: Add debug outputs and comments to mxs SPL source files
062e666 imx: mx6: Fixed AIPS3 base address issue
bc83af2 imx: imximage: Add QuadSPI boot support
364658f imx: mx6qsabreauto: Change to use common GPMI IO clock function
8c23f6f pmic:pfuz100 add switch mode and more registers
8385185 pmic:pfuze add macro for setting voltage
d8cd731 imx:mx6 update fuse_bank0_regs
d41380a fsl/ls1021qds: Add deep sleep support
8fe3f3b arm: ls102xa: Add LPUART support for LS1021ATWR board
3408c48 arm: ls102xa: Add LPUART support for LS1021AQDS board
e70b26f ls102xa: fdt: Disable QSPI and DSPI in NOR/NAND/SD boot
809e163 arm: ls102xa: Update snoop settings for CCI-400
2650c5d ARM: HYP/non-sec: Make variable gic_dist_addr as a local one
b2c8ac3 ls102xa: dcu: Add platform support for DCU on LS1021AQDS board
7f0f245 crypto/fsl: Add fixup for crypto node
8023778 arm: ls102xa: Add dummy gpio.h to enable CONFIG_OF_CONTROL
79dcb3a ls102xa: etsec: Select ge0_clk125 for eTSEC clock muxing as default
636e863 arm/ls1021a: Add workaround for DDR erratum A008378
Change-Id: I91b013eb0d4a7741aa360f701e86f3dfdfccb6c8
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This updates the revision to 4dab988, which includes following
changes:
4dab988 arm, imx6, aristainetos: board updates
1dfbf54f arm: mx6: cm-fx6: add splash screen support
f1882ea compulab: splash: support loading splash from sf
4c2bf3a compulab: splash: support multiple splash sources
a7d780b compulab: splash: refactor splash.c
46cef71 compulab: splash: use errno values
a2c128c arm: mx6: cm-fx6: add support for usb keyboard
71582ee arm: mx6: cm-fx6: display compulab logo
af637a8 arm: mx6: cm-fx6: add hdmi console support
e8d2b04 arm: mx6: cm-fx6: increase size of malloc area
6449956 arm: mx6: cm-fx6: pass 2nd nic mac addr to Linux
f3aba9f compulab: eeprom: allow reading mac address from multiple eeproms
3dafefb arm: mx6: cm-fx6: change dtb node for ethaddr
3f84477 arm: mx6: cm-fx6: expand boot sequence
0f1c4ca ot1200: add ot1200_spl_defconfig file
892bf75 ot1200: add basic SPL support
4b29ad8 ot1200: add SPL configuration
a94b46b ot1200: enable spi clock directly in ccgr_init(..)
0eeddfb ot1200: move ccgr and gpr init to c functions
b708920 ot1200: make use of imx_ddr_size(..)
3762dab ot1200: select SUPPORT_SPL
0bbf5e8 imx: mx6: Change ENV offset to 512K bytes for larger u-boot image
31f433e imx:mx6sxsabresd board spl support
4c46ecb imx:mx6 add mx6sx in imx spl header file
195c032 imx:mx6sx add dram io configure for mx6sx
982c08f imx:mx6sxsabresd spl support in header file
1551931 imx:mx6sxsabresd select SUPPORT_SPL
f15ff8f imx:mx6sxsabresd add spl config file
8cbbb75 mxsboot : Support of 224-bytes OOB area length
c717a19 mx6sxsabresd: Remove unneeded board_late_init()
5358bea spl: spl_nor: surround Linux-load code with #ifdef CONFIG_SPL_OS_BOOT
f041545 arm: vf610: Remove duplicate MTD defines.
Change-Id: Ib116be2e61828581ee97bc1a2536f83df6b39036
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
|
|
|
| |
Signed-off-by: Chunrong Guo <B40290@freescale.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
|
|
|
| |
Signed-off-by: Chunrong Guo <B40290@freescale.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
|
|
|
| |
Signed-off-by: Chunrong Guo <B40290@freescale.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
|
|
|
|
|
| |
provides the tcl script for endian swap
Signed-off-by: Chunrong Guo <B40290@freescale.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
|
|
|
|
|
|
| |
This release is not in use by any supported board, being kept
completely untested for last release. Drop it.
Reported-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
|
|
|
| |
Signed-off-by: Chunrong Guo <B40290@freescale.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
|
|
|
| |
Signed-off-by: Lauren Post <lauren.post@freescale.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
|
|
|
| |
Signed-off-by: Lauren Post <lauren.post@freescale.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
|
|
|
|
|
| |
- VPU firmware upgraded
Signed-off-by: Lauren Post <lauren.post@freescale.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
|
|
|
|
|
|
|
|
| |
- imx-vpu recipe version changed to internal version 5.4.27
- VPU share memory file open fixes
- Upgrade ion usage
- Remove obey-variables patch -now included in release
Signed-off-by: Lauren Post <lauren.post@freescale.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
|
|
|
|
|
| |
Remove obey-variables patch - included in release.
Signed-off-by: Lauren Post <lauren.post@freescale.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
- Update makefiles to work with toolchain changes from dizzy on.
- mxc-asrc: Enlarge the buffer size, change audio files
- mxc-securebooth: Change the u-boot pad len calculation
- mcc: Change the dword signing in to be string
- memtool: Add auto complete feature for memtool
- vpu: H.264 VUI encoding,
- gpu: Add debug scripts
- mmdc: Enable 16/32 bit system suport for tool mmdc2
- als_test: Get input event index correctly
- uart: Add stress test amd fix bugs
- pxp v4l2: Add UYVY and YUV444 support
Remove parts of Fix-build-in-OpenEmbedded-Core-environment.patch
that are invalid with 3.10.53 Makefile changes.
Imx-test Makefiles corrected to load the standard libraries correctly
for mxc_vpu, memtool and mmdc tests.
Signed-off-by: Lauren Post <lauren.post@freescale.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The Kernel sources has now been moved out of sstate control and to
make this easier to spot this has been moved to tmp/work-shared/
directory.
One good consequence of this change is that the built artifacts are
controlled by the Linux build system itself and its path is now
exported in STAGING_KERNEL_BUILDDIR variable.
This path adapts the build params to this new layout.
Change-Id: Ie27ef289aa3ae4c2593303ccbc450e0fd53b49cd
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Some of the unit-tests were not being built due to differences on how
the build system behaves when running inside of the OE-Core. This
fixes those minor issues and increases the number of tests available.
This increases the number of tests which build successfully.
The new built tests, when building for i.MX6Q are:
,----
| /unit_tests/hciattach-ar3k.bin
| /unit_tests/config_dec
| /unit_tests/akiyo.mp4
| /unit_tests/config_net
| /unit_tests/mxc_vpu_test.out
| /unit_tests/config_encdec
| /unit_tests/autorun-vpu.sh
| /unit_tests/memtool
| /unit_tests/config_enc
`----
When building for i.MX53 those are:
,----
| /unit_tests/hciattach-ar3k.bin
| /unit_tests/memtool
`----
And when building for i.MX28 those are:
,----
| /unit_tests/mxc_pf_test.out
| /unit_tests/mmdc2
| /unit_tests/key_slot_tests.sh
| /unit_tests/mxc_isl29023.out
| /unit_tests/partition_tests.sh
| /unit_tests/fail_mode_tests.sh
| /unit_tests/scc_test
| /unit_tests/scc2_setup.sh
| /unit_tests/autorun-scc2.sh
| /unit_tests/autorun-scc.sh
| /unit_tests/encrypt_decrypt_tests.sh
| /unit_tests/mxc_fb_test.out
| /unit_tests/memtool
| /unit_tests/scc2_test.out
| /unit_tests/autorun.sh
| /unit_tests/mxc_mlb_test.out
| /unit_tests/scc_setup.sh
| /unit_tests/test_subs.sh
| /unit_tests/all-suite.txt
`----
Change-Id: I58882adc22990d9ec53dc9ead034e85acd64375e
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This rework the recipe to use an easier to read metadata style,
basically:
* use 4 spaces for do_compile and do_install tasks
* rework inclusion of extra paths in do_compile
* include missing copyright notice from O.S. Systems
* move platform setting after source URI definition
Change-Id: Ic902c04a0eb8c0230ae74ac835b6a202784ebb78
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
|
|
|
|
|
|
|
|
| |
Fix the following build error of QSPI u-boot.
| couldn't read file "byte_swap.tcl": no such file or directory
| WARNING: /home/yocto/poky/ls1021aqds/tmp/work/ls1021aqds-poky-linux-gnueabi/u-boot-ls1/2014.07-r0/temp/run.do_compile.18788:1 exit 1 from
| tclsh byte_swap.tcl /home/yocto/poky/ls1021aqds/tmp/work/ls1021aqds-poky-linux-gnueabi/u-boot-ls1/2014.07-r0/git/u-boot.bin /home/yocto/poky/ls1021aqds/tmp/work/ls1021aqds-poky-linux-gnueabi/u-boot-ls1/2014.07-r0/git/u-boot.swap.bin 8
Signed-off-by: Zhenhua Luo <zhenhua.luo@freescale.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The imx-test builds a kernel module, as one of the utilities used for
testing. The module relies on the kernel to be installed before it is
able to build the scripts necessary for the build to succeed.
Due the new kernel build infrastructure and the lack of the sstate
management over the kernel source, a explicit dependency on do_install
of kernel needs to be done.
This fixes following failure:
,----
| .../.../module_test/mxc_sdma_mem_test.c:21:27: fatal error: linux/version.h: No such file or directory
| #include <linux/version.h>
| ^
| compilation terminated.
| make[4]: *** [.../.../module_test/mxc_sdma_mem_test.o] Error 1
| make[3]: *** [_module_.../.../module_test] Error 2
| make[2]: *** [sub-make] Error 2
| make[2]: Leaving directory `.../build-framebuffer/tmp/sysroots/imx53qsb/usr/src/kernel'
| make[1]: *** [all] Error 2
| make[1]: Leaving directory `.../.../module_test'
| make: *** [module_test] Error 2
`----
Change-Id: I0ebdfce4483d64fed4afe52c09d8e1d31d9374bb
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
|
|
|
|
|
|
| |
*qe-ucode are the microcode binaries for the QUICC Engine hardware block in QorIQ
products.
Signed-off-by: Chunrong Guo <B40290@freescale.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
|
|
|
|
|
| |
Debug agent for Freescale CodeWarrior debugger
Signed-off-by: Chunrong Guo <B40290@freescale.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This updates the code to a version based on 2015.01 stable
release. The changes, done on top of the original release are:
5d396c3 wandboard: Changed mmcroot variable so kernel 3.10.31 boots
c6d9bf7 iMX6: Change mmcroot to use fixed mmc block index for USDHC
be9a741 embestmx6boards: Change default bootenv configuration
ea9b369 wandboard: Use 32bit color depth for Fusion LCD
8e88da8 mx6sabresd: Use LDO dtb file until LDO bypass support is added
7d0f155 mx6slevk: Use LDO dtb file until LDO bypass support is added
dcd7ac3 mx6sabresd: Use mmcblk0 for CONFIG_MMCROOT
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This adds a versioned soname to the shared library during linking.
Otherwise an application linked with '-lmcc' needs libmcc.so for execution,
having libmcc.so.1 would not be enough.
root@colibri-vf:~# ls -l /usr/lib/libmcc.so*
lrwxrwxrwx 1 root root 13 Jan 7 2015 /usr/lib/libmcc.so.1 -> libmcc.so.1.0
-rwxr-xr-x 1 root root 5252 Jan 7 2015 /usr/lib/libmcc.so.1.0
root@colibri-vf:~# mcc-pingpong
mcc-pingpong: error while loading shared libraries: libmcc.so: cannot open shared object file: No such file or directory
Additionaly the following warning no longer appears.
WARNING: QA Issue: mcc-pingpong requires libmcc.so, but no providers in its RDEPENDS [file-rdeps]
Signed-off-by: Max Krummenacher <max.oss.09@gmail.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The kernel-module-mcc-dev brings the kernel API headers used when
doing application development which uses the libmcc.
So when libmcc-dev is included in a SDK, this brings all the necessary
boilerplate code.
The motivation for this can be found at message from Petr Kubizňák
<kubiznak.petr@elnico.cz>[1].
1. https://lists.yoctoproject.org/pipermail/meta-freescale/2015-January/012144.html
Change-Id: Icd8311c79a87500c0a9d97d9b63fb0340a5908a1
Reported-by: Petr Kubizňák <kubiznak.petr@elnico.cz>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
|
|
|
|
|
|
|
| |
This fixes the Makefile to properly generate the symlink inside the
installation directory.
Change-Id: I18ad51c87f64780bfdd8bd70abdda5554439d9e8
Reported-by: Petr Kubizňák <kubiznak.petr@elnico.cz>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
|
|
|
|
|
|
|
|
|
| |
This includes following changes:
2bf1c34 ls102xa: scfg: Remove SCFG bit reverse setting on LS1
80b1d30 ls1021atwr: SECURE BOOT- Add secure boot target for ls1021atwr
49eaf3e board/ls1021aqds: Add support to test GPIO by enabling EC3
16111c4 ls102xa: spi: Fix QSPI and DSPI compatibility issue on LS1021ATWR board
Signed-off-by: Chunrong Guo <B40290@freescale.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
|
|
|
|
|
|
|
| |
the byte_swap.tcl script is provided by another FSL u-boot tree, fix following
build error:
| install: cannot stat `/home/yocto/poky/build_ls1021atwr_release/tmp/work/x86_64-linux/u-boot-ls1-tools-native/2013.10-r0/git/byte_swap.tcl': No such file or directory
Signed-off-by: Chunrong Guo <B40290@freescale.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
|
|
|
| |
Signed-off-by: Chunrong Guo <B40290@freescale.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
|
|
|
|
|
|
| |
This updates the U-Boot fork based on 2015.01-rc4. This includes
several fixes which has been merged and form a solid release closer to
the 2015.01 stable release, ought to be out later this month.
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
|
|
|
|
|
|
|
|
| |
mqxboot is a pure make project. Inheriting autotools provided an implicit
do_install task, however with the change to seperate builddirs in dizzy
(${B} != ${S}) do_install fails.
Removing autotools and providing an explicit do_install task fixes this.
Signed-off-by: Max Krummenacher <max.oss.09@gmail.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
|
|
|
|
|
|
|
|
| |
libmcc is a pure make project. Inheriting autotools provided an implicit
do_install task, however with the change to seperate builddirs in dizzy
(${B} != ${S}) do_install fails.
Removing autotools and providing an explicit do_install task fixes this.
Signed-off-by: Max Krummenacher <max.oss.09@gmail.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This uses revision 5d396c3 which includes the 2015.01-rc3 development
version with following changes on top of it:
5d396c3 wandboard: Changed mmcroot variable so kernel 3.10.31 boots
c6d9bf7 iMX6: Change mmcroot to use fixed mmc block index for USDHC
be9a741 embestmx6boards: Change default bootenv configuration
ea9b369 wandboard: Use 32bit color depth for Fusion LCD
8e88da8 mx6sabresd: Use LDO dtb file until LDO bypass support is added
7d0f155 mx6slevk: Use LDO dtb file until LDO bypass support is added
dcd7ac3 mx6sabresd: Use mmcblk0 for CONFIG_MMCROOT
The repository URL has also been changed to point to the new Git
repository name (u-boot-fslc), however the previous repository is
still accessible to avoid breakage in old versions of meta-fsl-arm.
Change-Id: I4be932c8621508dba4171bfab28aa4e2799aaece
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|