summaryrefslogtreecommitdiffstats
path: root/recipes-bsp/u-boot
Commit message (Collapse)AuthorAgeFilesLines
* u-boot-ls1: Fix 'nand' buildsGary Thomas2015-07-161-2/+1
| | | | | | | | Builds for 'nand' booting were failing because of an incorrect path during compilation. Signed-off-by: Gary Thomas <gary@mlbassoc.com> Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
* u-boot-ls1: update to revision v2015.01-630-g6ba8eedTing Liu2015-07-161-6/+7
| | | | | | | | | | | | Changes: 1. Rebased on git://git.denx.de/u-boot.git v2015.01-487-gab92da9 2. Applied another 143 FSL/backported patches (git log ab92da9..) 3. add DEPENDS on dtc-native as u-boot brings in device tree files 4. use u-boot-with-spl-pbl.bin for nand 5. replace with u-boot-dtb.bin when swapping the image endianness Signed-off-by: Ting Liu <ting.liu@freescale.com> Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
* u-boot-ls1: merge u-boot-ls1.inc into recipeTing Liu2015-07-162-19/+18
| | | | | | | | There is no benefit to having a separate .inc file when we only support one version of u-boot-ls1. Signed-off-by: Ting Liu <ting.liu@freescale.com> Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
* u-boot-fslc: Bump revision to 5d9ffd22Fabio Estevam2015-07-061-1/+1
| | | | | | | | | Update the u-boot 2015.04 branch to include the following change: b1bf90e mx6sabresd: Enable video interfaces in bootargs Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
* u-boot-fslc: Update to revision 10aced3Otavio Salvador2015-06-102-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This backports following changes from 2015.07 development release: 10aced3 thermal: imx_thermal: use CPU temperature grade for trip points b02bbe4 imx: mx6: add display of CPU temperature grade in print_cpuinfo() 959d59a imx: mx6: add get_cpu_temp_grade to obtain cpu temperature grade from OTP 133492b imx: mx6: display max cpu frequency in print_cpuinfo() b1a9761 imx: mx6: add get_cpu_speed_grade_hz func to return MHz speed grade from OTP ac4fa5f mx6: add OTP bank1 registers 982b630 arm: mx6: ddr: set fast-exit on DDR3 if pd_fast_exit specified c462c40 arm/imx-common: Fix warning 'get_reset_cause' defined but not used 666a3df pmic: pfuze100 fix typo 2216998 imx: mx6sx enable SION for i2c pin mux 019f86c imx: marsboard: Enable thermal DM support 386878a imx: riotboard: Enable thermal DM support 0e80b68 imx: riotboard, marsboard: Enable thermal support bf9a6d7 hummingboard: Remove unused directory c46ff16 imx: ventana: add pmic_setup to SPL d12faa5 imx: ventana: (cosmetic) clean up size defines for improved readability 86f9770 imx: ventana: config: use MMC SPL RAW support c52aa2e env_nand: use nand_spl_load_image for readenv if SPL 5559f42 imx: ventana: use stack relocation cd10311 imx: ventana: add GSC boot watchdog disable to SPL 079ca00 imx: ventana: add gpio setup to SPL 484f580 imx: ventana: use common uart and i2c setup functions in SPL 3dcd603 imx: ventana: detect pmic using i2c probe instead of board model 32f01d2 imx: ventana: move GSC boot watchdog disable function to gsc.c defe0e8 imx: ventana: split out common functions between SPL and uboot 7a22259 imx: ventana: default msata/pci mux to pci before PCI enumeration e2e0076 imx: ventana: fix pcie reset for GW522x 265e3fb imx: ventana: config: enable Thermal support a8c94f9 imx: ventana: enable DM_SERIAL a4f84a5 imx: ventana: register gpio's with gpio_request 872b1ae imx: ventana: config: enable driver model 6f94cad imx: ventana: config: enable gpio command e574abe imx: ventana: display SPL boot device 31da35f imx: ventana: set dtype env var to boot media ebec986 arm: mx6: ddr3: Remove dead code d2249d2 i2c, mxc: rework i2c base address names for different SoCs 9c4a63b arm, imx6, i2c: add I2C4 for MX6DL f27f41c mx6: Set shared override bit in PL310 AUX_CTRL register 143286c tbs2910: add CONFIG_SUPPORT_EMMC_BOOT 0104511 tbs2910: use default CONFIG_SYS_PBSIZE 6358e0b tbs2910: only enable vga output for stdout/stderr when hdmi detected abce3a9 tbs2910: support for usb otg host mode 6d261b5 warp: README: Fix typo 5433284 imx: ventana: fix boot to SD 6219fb9 imx: dek_blob: Add explicit include for mapmem 57ffb41 bugfix i.mx6 pwm: prevent overflow of period_c * duty_ns Change-Id: I4449a78c6f5ee86476894b146534b30d39a109cd Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
* u-boot-fslc: Bump to b16ec2d revisionOtavio Salvador2015-05-112-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This includes some backports of 2015.07-rc1 release which are related to i.MX and Vybrid families. The backported changes are: b16ec2d mx6cuboxi: Mention Cubox-i in the README 4cf36bf hummingboard: Remove mx6solo specific support e767d87 mx6cuboxi: Skip usb initialization when booting without HDMI 6d87db5 mx6cuboxi: Pull down PAD_ENET_RXD0/RXD1 ef1be8d mx6cuboxi: Fix Ethernet PHY detection problem c11bc28 logos: Add Solidrun's logo df66a37 mx6cuboxi: Allow HDMI and USB keyboard to be stdout/stdin 43c9802 mx6cuboxi: Add USB host support 9403159 mx6cuboxi: Add HDMI output support 2ee593f Fix mxc_hab documenation f1b4690 arm: mx6: Clamp MMDC and DDR3 clocks for timing calculations 8afedb2 colibri_vf: Enable USB support for Colibri Vybrid 1c322c8 usb: host: Add ehci-vf USB driver for ARM Vybrid SoC's 8f3b4af ARM: vf610: Initial integration for Colibri VF50/VF61 ec4acf4 ARM: vf610: Enable caches d0b33b7 ARM: vf610: Add SoC and CPU type detection 6adfaab ARM: vf610: Enable external 32KHz oscillator 0cbdc08 ARM: vf610: Move DDR3 initialization to imx-common dd995b9 Merge remote-tracking branch 'imx/master' into patches-2015.04 205d586 mx6cuboxi: Load the correct 'fdtfile' variable 6a305f2 mx6cuboxi: Use more standard namings for fdt variables feb6cc5 mx6cuboxi: Differentiate Cubox-i and Hummingboard 8cb6817 mx6cuboxi: Introduce multi-SoC support cfdcc5f mx6cuboxi: Prepare for multi SoC support b684586 mx6cuboxi: Fix the defconfig name f5e23aa unzip: add gzwrite command to write compressed image to block device 5b9f6a3 gunzip: add gzwrite routine for extracting compresed images to block device 120aea5 ARM: cm_fx6: use "select" instead of default value in defconfig 755bd40 ARM: mx6: use "select" instead of default value in defconfig Change-Id: Ic3a0ecbd09e7a76d3ef732414184473a32952ac3 Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
* u-boot-fslc: Update revision to fb25693Otavio Salvador2015-04-232-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This updates U-Boot 2015.04 version with some fixes and improvements from 2015.07 release. Those are: cba4c25 mx6sabresd: Remove uneeded ifdef 407be42 mx6sabresd: Fix SPL memory description 761bc19 nitrogen6x: allow gzipped bitmap display 1c29ad7 iMX: Fix compilation error when enabling SECURE_BOOT 6b396b3 arm: mx6: tqma6: Extract baseboard configs into separate config file 76962d0 power: pfuze100: fix LDO_EN bit value 9e2b0c2 imx: ventana: Update missing memory/calib handling 767d88b imx: ventana: Add new memory configuration 18b3a91 imx: ventana: set HDMI video in to yuv422bt656 for GW551x-A a2559f1 imx: ventana: use hdmiinfmt env var to override HDMI capture format e9fc6d1 imx: ventana: add DT fixup for GW522x to change PCIE_RST# GPIO ee5931d imx: ventana: add 'gsc wd' command for enabling and disabling GSC watchdog 4569cd5 imx: ventana: added device-tree display configuration for LVDS displays f02390b imx: ventana: add support for DLC-700JMGT4 and DLC-800FIGT3 LCD displays 9506970 imx: ventana: add DT fixup for GW54xx compatibility with older kernels 7f14c31 imx: ventana: remove 128x16 calibration (share with 128x32) 06edcb9 imx: ventana: updated 16bit DDR calibration eeca451 imx: ventana: added DT fixup for GW551x-A video input 45af3f7 imx: ventana: gsc: add new hwmon rails e732917 imx: ventana: add mem_mb dynamic env var 16e369f imx: ventana: remove GSC hwmon voltage rail min/max test e2801a9 imx: ventana: update boot scripts to support ubifs boot vol aec3761 imx: ventana: only pinmux FEC enet signals for boards using it 7c5cd42 imx: ventana: add wdis config for GW5520 0417169 imx: ventana: add usb_pgood_delay 2sec default 75f21e3 imx: ventana: Add support for GW551x 0c81b14 imx: ventana: disable IMX6 watchdogs on GW51xx RevA and RevB 1274bd2 imx: ventana: fix various sparse warnings 30dc880 imx: ventana: config: enable EXT4 filesystem read/write support f6747cd imx: ventana: config: enable edid support 8cc25eb imx: ventana: config: Support ramdisk 9543e95 imx: ventana: config: add USB Mass Storage (ums) support 4717e13 imx: ventana: set LTC3676 PMIC to appropriate values per datasheet b0b8334 imx: ventana: add support for 4Gb density mem devices with IMX6DL 29f0d6b imx: ventana: enable precharge power-down fast-exit mode a51de27 imx: ventana: add usb_pcisel hwconfig support 3ee26ec imx: ventana: remove unused GPIO configuration e806b22 imx: ventana: assign default ethprime dynamically 0a6ee03 imx: ventana: add i210 support 306568d imx: ventana: disable 4k tftp/nfs packets b8ce6fe mx6: Add initial SPL support for HummingBoard-i2eX 08daa25 fdt: add new fdt_fixup_display function to configure display 78c5a18 arm: mx6: ddr: add pd_fast_exit flag to system information 32f9ef3 ARM: mxs: Get boot mode from OCRAM Another change included is: fb25693 Revert "embestmx6boards: convert to use config_distro_bootcmd.h" Which has been necessary to allow RIoT Board to work out of box with current SDCard layout used in meta-fsl-arm. Thanks to Nikolay Dimitrov <picmaster@mail.bg> and Gary Thomas <gary@mlbassoc.com> for reporting the issue. Change-Id: I7d13baefcda8f68fb9be618ea1eb55fc96bce5c2 Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
* u-boot-fslc: Update to the 2015.04's final release based forkOtavio Salvador2015-04-142-2/+2
| | | | | | | | | | | | | | | The 2b3a8e87 has the 2015.04 final release merged. So the current set of changes applied on top of the 2015.04 release are: 59e39d3 wandboard: Changed mmcroot variable so kernel 3.10.31 boots 48b8a98 iMX6: Change mmcroot to use fixed mmc block index for USDHC 2f1399e mx6sabresd: Use mmcblk0 for CONFIG_MMCROOT b265496 embestmx6boards: Change default bootenv configuration d8c2380 mx6sabresd: Use LDO dtb file until LDO bypass support is added 1556dde mx6slevk: Use LDO dtb file until LDO bypass support is added Change-Id: I0b9d5b812c20809b35521ff6dab8e2dda50ddd3c Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
* u-boot-imx: Upgrade to 3.14.28-1.0.0 GA releaseLauren Post2015-04-091-2/+2
| | | | | | | | Include support for i.MX 6 DQ Sabre Auto CPU2 board Bug fixes since 3.10.53-1.1.0 GA Signed-off-by: Lauren Post <lauren.post@freescale.com> Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
* u-boot-fslc: Update to 2015.04-based forkOtavio Salvador2015-04-093-9/+10
| | | | | | | | | This updates the fork based on upcoming 2015.04 release. This is currently based on 2015.04-rc5 tag and offers a very solid release for start the tests for Yocto Project 1.8 release. Change-Id: I15519ffc7a28411f850bcf8492d8e5fb981bec7c Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
* u-boot-ls1: fix multiple u-boot compile path changed.Chunrong Guo2015-04-031-5/+11
| | | | | | | | | | *fix the following error: |couldn't open "/poky/build/tmp/work/ls1021aqds-poky-linux-gnueabi/u-boot-ls1/2014.07-r0/git/u-boot.bin": no such file or directory (From OE-Core rev: eca277b0af9e0e29022f81f54c17bf24aec02232) Signed-off-by: Chunrong Guo <B40290@freescale.com> Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
* vf/twr-vf65gs10: add new SoC family "vf" for Vybrid in generalStefan Agner2015-03-121-1/+1
| | | | | | | | | This patch introduces a new base SoC family "vf". The family includes all Freescale Vybrid SoC based modules, which is the single core (vf50/VF5xx) or dual core (vf60/VF6xx) variant. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
* u-boot-fslc: Update to revision 614dd54Otavio Salvador2015-03-022-2/+2
| | | | | | | | | | | | | | | | | | | | | | This does the backport of following changes: 614dd54 mx5: fix get_reset_cause 2db5ec7 mx6slevk: Provide a proper pad configuration for OTG1_ID pin 32f9568 mx6sabre: Select CMD_EXT4 options 8fc3c92 mx6sabre: Enable User Mass Storage f2e5464 board: tbs2910: Enable USB Mass Storage support 47d960e mx35: Fix boot hang by avoiding vector relocation 7827b39 mx31: Fix boot hang by avoiding vector relocation be1165e mx25pdk: Turn on the LCD supply 777f0aa zmx25: Convert to generic board 646fb52 imx31_phycore: Convert to generic board ff37ab6 mx31ads: Convert to generic board e74b278 mmc: fsl_esdhc: Add support for DDR mode Fixed [YOCTO: #7384] Change-Id: I6eeb0a03a9909aea0157e57472780fe4ddbc04c1 Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
* u-boot-fslc: Update to revision 5d0291fOtavio Salvador2015-02-262-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | This backports following fixes from the upcoming U-Boot 2015.04: 5d0291f warp: Add User Mass Storage support 49ad0f1 warp: Select BOUNCE_BUFFER and CMD_EXT options 5a10751 cmd_usb_mass_storage: Remove extra 'ums' string in the usage text dd00fe2 warp: Add initial WaRP Board support b9b6996 imx: mx6sl: Extend USDHC SD2 pins to support 8-wire use 4a01af4 mmc: fsl_esdhc: Add support to force VSELECT set 11688e5 mmc: fsl_esdhc: Add CMD11 support to switch to 1.8V c1b0c39 imx:mx6slevk implement power init board 996d2cb imx:mx6slevk add pmic and i2c configuration 509825c imx:mx6sl add I2c pad settings 9867962 nitrogen6x: set environment variable reset_cause 64a6057 ARM: i.MX: provide access to reset cause through get_imx_reset_cause() d4c17e7 ot1200: add eeprom command to non-SPL build 7270ed6 cmd_eeprom: make it possible to define the used i2c bus dadd721 ARM: imx6 Add WDOG3 for i.MX6SX 3f5ba06 ARM: imx6: disable bandgap self-bias after boot Change-Id: I7a73b8722de1085ef93129c4e801617204d483e7 Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
* u-boot-fslc: Update to revision 6e66aedOtavio Salvador2015-02-192-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This includes the following backports from the 2015.04 upcoming release: 6e66aed imx:mx6 set normal APS and standby PFM mode 7a5cac0 pmic: fix missing SWITCH_SIZE f98e73a pmic:pfuze implement pmic_mode_init d79d747 mx53loco: Fix boot hang during reboot stress test a5fb3c4 arm: mxs: Add 'Wait for JTAG user' if booted in JTAG mode 685ec23 arm: mxs: Enable booting of mx28 without battery 19161e5 arm: mxs: Add debug outputs and comments to mxs SPL source files 062e666 imx: mx6: Fixed AIPS3 base address issue bc83af2 imx: imximage: Add QuadSPI boot support 364658f imx: mx6qsabreauto: Change to use common GPMI IO clock function 8c23f6f pmic:pfuz100 add switch mode and more registers 8385185 pmic:pfuze add macro for setting voltage d8cd731 imx:mx6 update fuse_bank0_regs d41380a fsl/ls1021qds: Add deep sleep support 8fe3f3b arm: ls102xa: Add LPUART support for LS1021ATWR board 3408c48 arm: ls102xa: Add LPUART support for LS1021AQDS board e70b26f ls102xa: fdt: Disable QSPI and DSPI in NOR/NAND/SD boot 809e163 arm: ls102xa: Update snoop settings for CCI-400 2650c5d ARM: HYP/non-sec: Make variable gic_dist_addr as a local one b2c8ac3 ls102xa: dcu: Add platform support for DCU on LS1021AQDS board 7f0f245 crypto/fsl: Add fixup for crypto node 8023778 arm: ls102xa: Add dummy gpio.h to enable CONFIG_OF_CONTROL 79dcb3a ls102xa: etsec: Select ge0_clk125 for eTSEC clock muxing as default 636e863 arm/ls1021a: Add workaround for DDR erratum A008378 Change-Id: I91b013eb0d4a7741aa360f701e86f3dfdfccb6c8 Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
* u-boot-fslc: Backport i.MX related changes from v2015.04Otavio Salvador2015-02-052-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This updates the revision to 4dab988, which includes following changes: 4dab988 arm, imx6, aristainetos: board updates 1dfbf54f arm: mx6: cm-fx6: add splash screen support f1882ea compulab: splash: support loading splash from sf 4c2bf3a compulab: splash: support multiple splash sources a7d780b compulab: splash: refactor splash.c 46cef71 compulab: splash: use errno values a2c128c arm: mx6: cm-fx6: add support for usb keyboard 71582ee arm: mx6: cm-fx6: display compulab logo af637a8 arm: mx6: cm-fx6: add hdmi console support e8d2b04 arm: mx6: cm-fx6: increase size of malloc area 6449956 arm: mx6: cm-fx6: pass 2nd nic mac addr to Linux f3aba9f compulab: eeprom: allow reading mac address from multiple eeproms 3dafefb arm: mx6: cm-fx6: change dtb node for ethaddr 3f84477 arm: mx6: cm-fx6: expand boot sequence 0f1c4ca ot1200: add ot1200_spl_defconfig file 892bf75 ot1200: add basic SPL support 4b29ad8 ot1200: add SPL configuration a94b46b ot1200: enable spi clock directly in ccgr_init(..) 0eeddfb ot1200: move ccgr and gpr init to c functions b708920 ot1200: make use of imx_ddr_size(..) 3762dab ot1200: select SUPPORT_SPL 0bbf5e8 imx: mx6: Change ENV offset to 512K bytes for larger u-boot image 31f433e imx:mx6sxsabresd board spl support 4c46ecb imx:mx6 add mx6sx in imx spl header file 195c032 imx:mx6sx add dram io configure for mx6sx 982c08f imx:mx6sxsabresd spl support in header file 1551931 imx:mx6sxsabresd select SUPPORT_SPL f15ff8f imx:mx6sxsabresd add spl config file 8cbbb75 mxsboot : Support of 224-bytes OOB area length c717a19 mx6sxsabresd: Remove unneeded board_late_init() 5358bea spl: spl_nor: surround Linux-load code with #ifdef CONFIG_SPL_OS_BOOT f041545 arm: vf610: Remove duplicate MTD defines. Change-Id: Ib116be2e61828581ee97bc1a2536f83df6b39036 Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
* u-boot-ls1-tools-native: remove recipeChunrong Guo2015-02-051-16/+0
| | | | | Signed-off-by: Chunrong Guo <B40290@freescale.com> Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
* u-boot-ls1: Added change-file-endianess as DEPENDSChunrong Guo2015-02-051-1/+1
| | | | | Signed-off-by: Chunrong Guo <B40290@freescale.com> Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
* u-boot-imx (2009.08): Remove deprecated versionOtavio Salvador2015-02-051-68/+0
| | | | | | | | This release is not in use by any supported board, being kept completely untested for last release. Drop it. Reported-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
* u-boot-ls1: Booting from SD card using u-boot-with-spl-pblChunrong Guo2015-02-021-0/+1
| | | | | Signed-off-by: Chunrong Guo <B40290@freescale.com> Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
* u-boot-imx: Upgrade to 3.10.53-1.1.0_GA releaseLauren Post2015-01-271-3/+3
| | | | | Signed-off-by: Lauren Post <lauren.post@freescale.com> Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
* u-boot-ls1: add the path of byte_swap.tcl scriptZhenhua Luo2015-01-221-1/+1
| | | | | | | | | | Fix the following build error of QSPI u-boot. | couldn't read file "byte_swap.tcl": no such file or directory | WARNING: /home/yocto/poky/ls1021aqds/tmp/work/ls1021aqds-poky-linux-gnueabi/u-boot-ls1/2014.07-r0/temp/run.do_compile.18788:1 exit 1 from | tclsh byte_swap.tcl /home/yocto/poky/ls1021aqds/tmp/work/ls1021aqds-poky-linux-gnueabi/u-boot-ls1/2014.07-r0/git/u-boot.bin /home/yocto/poky/ls1021aqds/tmp/work/ls1021aqds-poky-linux-gnueabi/u-boot-ls1/2014.07-r0/git/u-boot.swap.bin 8 Signed-off-by: Zhenhua Luo <zhenhua.luo@freescale.com> Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
* u-boot-fslc: Update to 3120db4e revisionOtavio Salvador2015-01-132-2/+2
| | | | | | | | | | | | | | | This updates the code to a version based on 2015.01 stable release. The changes, done on top of the original release are: 5d396c3 wandboard: Changed mmcroot variable so kernel 3.10.31 boots c6d9bf7 iMX6: Change mmcroot to use fixed mmc block index for USDHC be9a741 embestmx6boards: Change default bootenv configuration ea9b369 wandboard: Use 32bit color depth for Fusion LCD 8e88da8 mx6sabresd: Use LDO dtb file until LDO bypass support is added 7d0f155 mx6slevk: Use LDO dtb file until LDO bypass support is added dcd7ac3 mx6sabresd: Use mmcblk0 for CONFIG_MMCROOT Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
* u-boot-ls1: Upgrade to 2014.07 versionChunrong Guo2015-01-062-4/+4
| | | | | | | | | | | This includes following changes: 2bf1c34 ls102xa: scfg: Remove SCFG bit reverse setting on LS1 80b1d30 ls1021atwr: SECURE BOOT- Add secure boot target for ls1021atwr 49eaf3e board/ls1021aqds: Add support to test GPIO by enabling EC3 16111c4 ls102xa: spi: Fix QSPI and DSPI compatibility issue on LS1021ATWR board Signed-off-by: Chunrong Guo <B40290@freescale.com> Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
* u-boot-ls1-tools-native: fix the git url and SHAChunrong Guo2015-01-061-0/+3
| | | | | | | | | the byte_swap.tcl script is provided by another FSL u-boot tree, fix following build error: | install: cannot stat `/home/yocto/poky/build_ls1021atwr_release/tmp/work/x86_64-linux/u-boot-ls1-tools-native/2013.10-r0/git/byte_swap.tcl': No such file or directory Signed-off-by: Chunrong Guo <B40290@freescale.com> Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
* u-boot-fslc: Update to revision 2a94e33cOtavio Salvador2015-01-052-2/+2
| | | | | | | | This updates the U-Boot fork based on 2015.01-rc4. This includes several fixes which has been merged and form a solid release closer to the 2015.01 stable release, ought to be out later this month. Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
* u-boot-fslc: Update to 2015.01-rc3 based versionOtavio Salvador2014-12-294-11/+11
| | | | | | | | | | | | | | | | | | | | This uses revision 5d396c3 which includes the 2015.01-rc3 development version with following changes on top of it: 5d396c3 wandboard: Changed mmcroot variable so kernel 3.10.31 boots c6d9bf7 iMX6: Change mmcroot to use fixed mmc block index for USDHC be9a741 embestmx6boards: Change default bootenv configuration ea9b369 wandboard: Use 32bit color depth for Fusion LCD 8e88da8 mx6sabresd: Use LDO dtb file until LDO bypass support is added 7d0f155 mx6slevk: Use LDO dtb file until LDO bypass support is added dcd7ac3 mx6sabresd: Use mmcblk0 for CONFIG_MMCROOT The repository URL has also been changed to point to the new Git repository name (u-boot-fslc), however the previous repository is still accessible to avoid breakage in old versions of meta-fsl-arm. Change-Id: I4be932c8621508dba4171bfab28aa4e2799aaece Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
* u-boot-fslc: Update revision to e3517cbOtavio Salvador2014-12-102-96/+1
| | | | | | | | | | | | This includes following fixes: e3517cb wandboard: Changed mmcroot variable so kernel 3.10.31 boots 2082e4d iMX6: Change mmcroot to use fixed mmc block index for USDHC The patch iMX6-Change-mmcroot-to-use-fixed-mmc-block-index-for.patch is now applied in the repository, so removed from the metadata. Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
* u-boot-imx: Upgrade to 3.10.31-1.1.0_beta2 releaseLauren Post2014-12-071-2/+2
| | | | | | | Upgrade to support imx6sxsabresd T01.2 silicon changes Signed-off-by: Lauren Post <lauren.post@freescale.com> Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
* u-boot-*: Rework LOCALVERSION depending on SRCBRANCHDaiane Angolini2014-11-224-3/+5
| | | | | | | | | | | | | | | | LOCALVERSION is used in FSL Community BSP Release Notes and should highlight which are the _release version_ for that particular provider. In addition LOCALVERSION makes it easy to track where the binary running on a target is from. Both reasons make LOCALVERSION a very important information. The overall rule is that LOCALVERSION would point to SRCBRANCH, unless in a case of explicit exception. Signed-off-by: Daiane Angolini <daiane.angolini@freescale.com> Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
* u-boot-fslc: Add patch to work with 3.10.31-1.1.0_beta kernelLauren Post2014-11-102-0/+95
| | | | | | | | | 3.10.31 linux-imx has update to work with fixed mmc blocks Without this patch the community u-boot will not boot on some mx6 boards. Signed-off-by: Lauren Post <lauren.post@freescale.com> Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
* u-boot-imx: Upgrade to 2014.04 versionLauren Post2014-11-102-3/+3
| | | | | | | | | - Add mx6sx support - General fixes for mx6slevk and other mx6 - Support to use zImage Signed-off-by: Lauren Post <lauren.post@freescale.com> Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
* u-boot-fslc: Update to 5fd0b607dFabio Estevam2014-11-102-2/+2
| | | | | | | | | This adds the following U-boot patch: 5fd0b607d mx53loco: Change 'fdt_file' dynamically Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
* u-boot-ls1: Update to 50d6848 revisionChunrong Guo2014-11-081-1/+1
| | | | | | | | | | | | This includes following changes: 50d6848 arm: ls102xa: Update bit reversing for SCFG registers 4d18340 arm: ls102xa: Remove custom part number SLS1020A and related defination 756cbdc arm: ls102xa: clear EPU registers for deep sleep 1d333c7 arm: ls102xa: correct the base address of DCSR registers Signed-off-by: Chunrong Guo <B40290@freescale.com> Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
* u-boot-imx: Upgrade to 3.10.17-1.0.2 patch releaseLauren Post2014-11-051-1/+1
| | | | | | | Improve speed of image authentication in 2013.04 Signed-off-by: Lauren Post <lauren.post@freescale.com> Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
* u-boot-*: Add DESCRIPTION for u-boot providersDaiane Angolini2014-10-314-3/+7
| | | | | | | | | Add u-boot DESCRIPTION for those providers still using the default one. This is needed in order to have a complete and readable list of u-boot providers in FSL Community BSP Release Notes. Signed-off-by: Daiane Angolini <daiane.angolini@freescale.com> Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
* u-boot-fslc: Update to 2014.10 upcoming releaseOtavio Salvador2014-10-234-11/+15
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | This updates the U-Boot to the 2014.10 based branch. On top of the original code we still have following changes applied: 75ce95e embestmx6boards: Change default bootenv configuration 472bfb3 ot1200: add sata support 4e8b5ee ot1200: fix sf detection 857ccfd ARM: i.MX6: include prototype for get_board_rev() 2b542e6 video: ipu_disp: remove pixclk fixup 499a8ca video: ipu: fix debug and comment c970aa2 lcd: Fix build error with CONFIG_LCD_BMP_RLE8 37a6b36 mx6sabre_common: Add HDMI config to common code 56f29bf mx6qsabreauto: Add HDMI support 2878ac3 ot1200: remove superfluous "string" tag d2104d6 ARM: i.MX video: declare displays and display_count publicly 2d6e2ec ARM: i.MX: provide declaration for board_spi_cs_gpio d09ced3 ARM: prevent compiler warnings from bootm.c 34fd658 wandboard: Use 32bit color depth for Fusion LCD 92e4fa9 mx6sabresd: Use LDO dtb file until LDO bypass support is added d859ee7 mx6slevk: Use LDO dtb file until LDO bypass support is added 47ac5b6 mx6sabresd: Use mmcblk0 for CONFIG_MMCROOT Due the changes on the way U-Boot works now, heavily relying on kconfig, it is required to use the 'configure' step to properly setup it for the 'sandbox' before building the tools. Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
* u-boot-fslc: Update to e36968a revisionOtavio Salvador2014-09-232-2/+2
| | | | | | | | | | | | | | | This includes follow backports from 2014.10 upcoming release e36968a wandboard: Use 32bit color depth for Fusion LCD c1c50cf mx6qsabreauto: Staticize when possible 930ed7c mx6sxsabresd: Staticize i2c_pad_info1 38b6f2e imx:mx6slevk: change CONFIG_SYS_FSL_ESDHC_ADDR 10377d0 imx:mx6qarm2: change CONFIG_SYS_FSL_ESDHC_ADDR a1cf9ae imx:mx6sxsabresd: change CONFIG_SYS_FSL_ESDHC_ADDR 3ac6818 arm: Fix _start for CONFIG_SYS_DV_NOR_BOOT_CFG bbc0712 arm: Make reset position-independent Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
* u-boot-ls1: Add recipe for Layerscape1 supportZhenhua Luo2014-09-153-0/+51
| | | | | | | | * u-boot-ls1-tools-native: provides the tcl script for endian swap * u-boot-ls1: the u-boot recipes for ls1021aqds and ls1021atwr support Signed-off-by: Zhenhua Luo <zhenhua.luo@freescale.com> Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
* u-boot-fslc: Update to 53cd36b revisionOtavio Salvador2014-09-152-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This updates the 2014.07-based branch with more backports from the 2014.10 upcoming release. The following changes are included: 53cd36b imx: mx6slevk: Change to use generic board 987efad imx: mx6q/dlarm2: Change to use generic board 0207052 README.imximage: Fix the maximum DCD size 13e94fe imx: Fix build of mx6sxsabresd 318d1cd mx6sxsabresd: Add PCI support 919802d pcie_imx: Add mx6solox support 847d6ce mx6: imx-regs: Provide a structure for GPC registers f26e33b mx6qsabreauto: Remove imx6q-sabreauto.dts f22fd9d imx: nitrogen6x: Replace 'fatload' by 'load' command in env settings to be filesystem independent e45540b arm: vf610: lpuart: disable FIFO on initializaton 11571b6 arm: vf610: lpuart: fix status register handling 09e81f4 mx6: Fix ECSPI typo in soc_boot_modes b8d5d42 imximage: Fix imximage IVT bug for EIM-NOR boot 228135e iMX6: Disable the L2 before chaning the PL310 latency 45108f1 tools: imximage: Fix the maximum DCD size for mx53/mx6 9f3f181 pci: add support for board_pci_fixup_dev function 4ecf3e6 arm: mx6: add get_cpu_type() b6faaf1 arm: mx6: ddr: fix cs0_end calculation 07917e7 arm: mx6: ddr: configure MMDC for slow_pd 66b2f14 arm: mx6: ddr: do not write into reserved bit b3f847e arm: mx6: ddr: cleanup eba02a9 i2c: imx: add macros to setup pads for multiple SoC types e50e740 sata: dwc_ahsata: implement sata_port_status a45361d compulab: eeprom: add support for defining eeprom i2c bus 8f82ddd mx6: add clock enabling functions 5305489 net: fec_mxc: Poll FEC_TBD_READY after polling TDAR d5e440b net: fec_mxc: Adjust RX DMA alignment for mx6solox fca8b5a usb: ci_udc: implement dfu_usb_get_reset 7baddea arm: Add missing .vectors section to linker scripts 324df11 arm: vf610: add NFC clock support 10c68b2 arm: vf610: add NFC pin mux 9bba571 ARM: Fix overflow in MMU setup 7be9add api: fix build without CMD_NET support 8a9e527 e1000: add i210 support dcd2c8c e1000: Implement dcache support Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
* u-boot-imx: Use the new fsl-u-boot-localversion classOtavio Salvador2014-09-012-1/+8
| | | | | | | | | | | | This uses the new class for LOCALVERSION handling. The local version is set for '+imx' by default but can be overriden by users of this .inc file. While on that move the PACKAGE_ARCH setting, in the 2009.08 recipe, to the end of file, as done on other recipes. Change-Id: Ic7e26635908cefe28c340cd9885e1efa0a009a16 Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
* u-boot-fslc: Use the new fsl-u-boot-localversion classOtavio Salvador2014-09-012-1/+4
| | | | | | | | | This uses the new class for LOCALVERSION handling. The local version is set for '+fslc' by default but can be overriden by users of this .inc file. Change-Id: Ic6089ffad89648ec5f3d2f8247e33fd5dd0e7fea Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
* u-boot-fslc: Update to a824e89 revisionOtavio Salvador2014-08-302-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | This include several backports of fixes and improvements from upcoming U-Boot 2014.10. Those are: a824e89 mx6sxsabresd: Add Ethernet support 6fc1d30 mx6sx: Adjust enable_fec_anatop_clock() for mx6solox 55d1de2 mx6sxsabresd: Update DDR initialization 9101eae pci: mx6: fix occasional link failures e97d548 ARM: mx6: Enable Thumb build for SPL fa27b7b ARM: mx6: Handle the MMDCx_MDCTL COL field caprices b141ef7 ARM: mx6: Prevent overflow in DRAM size detection c065fdd ARM: mx5: Fix CHSCCDR name aaee4ef i.MX31 PDK: Enable generic board for i.MX31 PDK a371261 pmic: pmic_pfuze100: Use a shorter name for PMIC name ed82ae7 mx6: crm_regs: Fix MXC_CCM_CIMR_MASK_PERIPH2_CLK_SEL_LOADED 7d34646 mx6: crm_regs: Fix MXC_CCM_CLPCR_WB_PER_AT_LPM definition 6e03308 mx6: crm_regs: Fix CDCDR_SPDIF0_CLK_PODF mask and offset 0a79f15 mx6: imx-regs: Remove unused 'omux' field from iomux struct 01ed8e1 arm: m53evk: Fix RTC bus number fb9eb0c lib: div64: add missing include cf321e1 mtd: cfi_flash: fix clang warning 64d14a7 fsl_i2c: add support for 3rd and 4th I2C Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
* u-boot-fslc: Update to dfd9146 revisionOtavio Salvador2014-08-012-2/+2
| | | | | | | | | | | This includes following fixes: dfd9146 mx6sabresd: Use LDO dtb file until PMIC support is added 28b6bee mx6slevk: Use LDO dtb file until PMIC support is added This avoids boot issues due the lacking of LDO bypass support. Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
* u-boot-fslc: Update to 7a3b1da revisionOtavio Salvador2014-07-282-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | This includes the following changes: 7a3b1da mx6sabresd: Use mmcblk0 for CONFIG_MMCROOT cb07d74 Add TQ Systems TQMa6 board support e379c03 arm, imx6: add aristainetos board 562f8df spi: add config option to enable the WP pin function on st micron flashes a0ae009 i.MX6: add enable_spi_clk() b2f97cf pwm, imx6: add support for pwm modul on imx6 aafe402 i.MX6: define struct pwm_regs and PWMCR_* defines 4a4d3a7 imx6: add gpr2 usb_otg_id iomux select control define d726d5f arm: mxs: Scrub useless ifdef aeadf06 mx6: Adjust the GPR offset for mx6solox 0a11d6f mx6: Remove duplication of iomuxc structure fa8cf31 mx6sxsabresd: Add PFUZE100 PMIC support a3df99b mx6: soc: Do not apply the PFD erratum for mx6solox 6ed9c7b embestmx6boards: convert to generic board 14a1613 mx6sx: Add initial support for mx6sxsabresd board d95b6ab mx6: clock: Do not enable sata and ipu clocks f586040 mx6sx: Add pin definitions 05d54b8 mx6: Add support for the mx6solox variant Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
* u-boot-fslc: Update to 2014.07-based releaseOtavio Salvador2014-07-213-11/+10
| | | | | | | | | | | | | | | | | | | | This updates the FSL Community's U-Boot fork to a 2014.07-based release. Along with the recipe revision changes, this modifies the default kernel image to "zImage" as most machines maintained in meta-fsl-arm now uses it. The machines that are still using uImage are: - imx31pdk - imx35pdk - imx53ard - imx6dlsabreauto - imx6solosabreauto - imx6solosabresd Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
* u-boot-fslc: Update 2014.01-based version to f5d8030Otavio Salvador2014-05-112-2/+2
| | | | | | | | | | | | This includes following changes: f5d8030 wandboard: Pass video kernel arguments for HDMI and LCD 07425b2 wandboard: add Future Eletronics 7" WVGA LCD extension board f637b1e imx-common/video: add detect_hdmi fc21589 imx-common: add board_video_skip Change-Id: I6361b60b8693ca7293fd81cf8f937d380e3bb7b2 Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
* uboot-imx: Upgrade to 3.10.17-1.0.0 GA for mx6Lauren Post2014-04-301-2/+2
| | | | | | Change-Id: I0934ac02fcd5317da5e5fb717822a840f037df1d Signed-off-by: Lauren Post <lauren.post@freescale.com> Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
* u-boot-fslc: Fix native contamination for libsslOtavio Salvador2014-04-191-2/+2
| | | | | | | | | | In case host does not have libssl available, mkimage will fail to run as the linking flags where not complete. Fixes [YOCTO: #6098] Change-Id: Ia7bd80b500ac6e60357f1e61d304bee4e3cb6832 Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
* u-boot-fslc: Update to v2014.01 based releaseOtavio Salvador2014-03-313-10/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This updates U-Boot to a v2014.01 based release. It includes following patches on top of prestine v2014.01 tag: 490069b mx6sabresd: Use LDO dtb file until PMIC support is added 6467f19 mx6slevk: Use LDO dtb file until PMIC support is added 5555f1b i.MX6: nitrogen6x: pedantic: BOOT_FROM==spi, not sd 029912e NET: fec_mxc: fix MDIO clock prescaler calculation 0163b4c ARM: imx6: fix wrong fec clk 9f120dc pci: mx6: Implement reset callback d016d9d mx6: Enable L2 cache support 8b8c015 mx6qsabreauto: Update imximage.cfg fbd6105 mx6: Distinguish mx6dual from mx6quad 7d7f526 imx: Introduce a header for the imx cpu versions 7717807 hummingboard: Return from cpu_eth_init() directly 58ea0f3 imx6: make sure MMDC_CHx_MASK is clear to avoid warm reset failure 8612ce3 imx6: ensure AHB clock is 132MHz in low freq boot mode 094a791 ARM: m53evk: Enable CONFIG_REGEX 778d80a ARM: m53evk: Rename mxc-nand to mxc_nand e470e26 ARM: mx6: Enable PCIe on Sabrelite 0a666db ARM: mx6: Add PCI express driver 274fd14 ARM: mx6: Add PCI express clock configuration 5aebc94 mx6sl: Adjust fdt_addr to avoid address overlapping 95a98c2 mx6sabresd: Use mmcblk0 for CONFIG_MMCROOT cd0b4d9 MX6: Add SION flag to ENET_REF_CLK PAD Change-Id: I2bd74338c2e099b1e09cd504c6e8faefaa68d504 Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
generated by cgit v1.2.3-54-g00ecf (git 2.39.0) at 2024-09-26 11:55:40 +0000