| Commit message (Collapse) | Author | Age | Files | Lines |
|
|
|
|
|
|
|
|
|
|
|
| |
Networkmanager still listens on sysfs and seems to load firmware from
userspace for radio units. For Variscite VarSOM this fixed Bluetooth.
More details at linux-fslc / imx_v6_v7_defconfig commit [1]
[1] https://github.com/Freescale/linux-fslc/commit/80f8894094e04ddb6ae8dadbba41ebe7f392f230
Signed-off-by: Andreas Müller <schnitzeltony@gmail.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Fixes:
| Sep 04 09:05:10 imx6qdl-variscite-som systemd-udevd[220]: Failed to apply ACL on /dev/v4l-subdev0: Operation not supported
| Sep 04 09:05:10 imx6qdl-variscite-som systemd-udevd[224]: Failed to apply ACL on /dev/v4l-subdev1: Operation not supported
| Sep 04 09:05:10 imx6qdl-variscite-som systemd-udevd[215]: Failed to apply ACL on /dev/v4l-subdev10: Operation not supported
| Sep 04 09:05:10 imx6qdl-variscite-som systemd-udevd[228]: Failed to apply ACL on /dev/v4l-subdev2: Operation not supported
| Sep 04 09:05:10 imx6qdl-variscite-som systemd-udevd[232]: Failed to apply ACL on /dev/v4l-subdev5: Operation not supported
| Sep 04 09:05:10 imx6qdl-variscite-som systemd-udevd[217]: Failed to apply ACL on /dev/v4l-subdev11: Operation not supported
| Sep 04 09:05:10 imx6qdl-variscite-som systemd-udevd[214]: Failed to apply ACL on /dev/dri/card1: Operation not supported
| Sep 04 09:05:10 imx6qdl-variscite-som systemd-udevd[216]: Failed to apply ACL on /dev/v4l-subdev8: Operation not supported
| Sep 04 09:05:10 imx6qdl-variscite-som systemd-udevd[226]: Failed to apply ACL on /dev/v4l-subdev9: Operation not supported
and nasty follow-ups: Starting weston from sddm as unpriviledged user fails
with some hints on missing access rights.
For a better understanding CONFIG_TMPFS=y was added which was set indirectly
by CONFIG_DEVTMPFS=y
Signed-off-by: Andreas Müller <schnitzeltony@gmail.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
|
|
|
|
|
|
|
|
|
|
| |
This upgrades the kernel to the 4.17-based fork. Following changes are
applied on top of v4.17 tag:
0a883adda1ba fec: Add disable_giga parameter to force 10/100 operation
cfc84d295839 MA-7633-2 [Android-Reboot]reboot to fastboot\recovery mode
6bbb0bc16daa ARM: imx: add cpu_is_imx6() routine
Change-Id: I5791003cd9e80ba263e1d5685d5e95aa9e8a9ed6
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
|
|
|
|
|
| |
This adds the i.MX25 configuration. It is based on
imx_v4_v5_defconfig.
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
|
|
|
|
|
| |
This commit add linux-fslc recipe version 4.13-rc6.
Signed-off-by: Fabio Berton <fabio.berton@ossystems.com.br>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
- Use defconfig only for 4.9 version moving directory to linux-fslc-4.9.
- Merge tag v4.9.44 into 4.9.x+fslc and apply the following changes on top of it:
- eea1ec08f8a5 MIPS: DEC: Fix an int-handler.S CPU_DADDI_WORKAROUNDS regression
- 5e5a51045532 pinctrl: meson-gxbb: Add missing GPIODV_18 pin entry
- 8cbc0b49ca8d pinctrl: samsung: Remove bogus irq_[un]mask from resource management
- 8495ab6ef94a pinctrl: uniphier: fix WARN_ON() of pingroups dump on LD20
- f642d29c2388 pinctrl: uniphier: fix WARN_ON() of pingroups dump on LD11
- 877fe62863d0 pinctrl: intel: merrifield: Correct UART pin lists
- 7b6fff65ecf9 pinctrl: sunxi: add a missing function of A10/A20 pinctrl driver
- a68978bb949a pnfs/blocklayout: require 64-bit sector_t
- eda1b3d42fad iio: adc: vf610_adc: Fix VALT selection value for REFSEL bits
- 4cae4a23d9a4 usb:xhci:Add quirk for Certain failing HP keyboard on reset after resume
- f4bbed570aef usb: quirks: Add no-lpm quirk for Moshi USB to Ethernet Adapter
- 42d65cc89a23 usb: core: unlink urbs from the tail of the endpoint's urb_list
- 7c2beb1c4432 USB: Check for dropped connection before switching to full speed
- 7f737f10c1ee usb: renesas_usbhs: Fix UGCTRL2 value for R-Car Gen3
- 2db03a7fa0dd usb: gadget: udc: renesas_usb3: Fix usb_gadget_giveback_request() calling
- a09ecc9345b6 uas: Add US_FL_IGNORE_RESIDUE for Initio Corporation INIC-3069
- b189f8eb2715 staging: comedi: comedi_fops: do not call blocking ops when !TASK_RUNNING
- bbae08213e6e iio: light: tsl2563: use correct event code
- 1ca3869234d3 iio: accel: bmc150: Always restore device to normal mode after suspend-resume
- c5347390e57a staging:iio:resolver:ad2s1210 fix negative IIO_ANGL_VEL read
- 199a3f26e9d8 USB: hcd: Mark secondary HCD as dead if the primary one died
- 821ccbe2937e usb: musb: fix tx fifo flush handling again
- 4fd8c366acac USB: serial: pl2303: add new ATEN device id
- 566516401501 USB: serial: cp210x: add support for Qivicon USB ZigBee dongle
- e27f58cd130b USB: serial: option: add D-Link DWM-222 device ID
- 2b3bf207b2a2 drm/i915: Fix out-of-bounds array access in bdw_load_gamma_lut
- 4381e2c30008 drm/etnaviv: Fix off-by-one error in reloc checking
- 00f3c2a253f7 nfs/flexfiles: fix leak of nfs4_ff_ds_version arrays
- 0a205d8145c2 mmc: mmc: correct the logic for setting HS400ES signal voltage
- 160c365b5879 nand: fix wrong default oob layout for small pages using soft ecc
- 227559e6233c fuse: initialize the flock flag in fuse_file on allocation
- 1da30c23b63b target: Fix node_acl demo-mode + uncached dynamic shutdown regression
- b51a71635576 iscsi-target: Fix iscsi_np reset hung task during parallel delete
- e6a0599b7464 iscsi-target: fix memory leak in iscsit_setup_text_cmd()
- ced271b814e4 mtd: nand: Fix timing setup for NANDs that do not support SET FEATURES
- a311810903c7 xtensa: don't limit csum_partial export by CONFIG_NET
- a3ab0f069f46 xtensa: mm/cache: add missing EXPORT_SYMBOLs
- 03973c57e1a2 xtensa: fix cache aliasing handling code for WT cache
- 0041042de554 futex: Remove unnecessary warning from get_futex_key
- e2286916ac07 mm: fix list corruptions on shmem shrinklist
- b56cd77c1205 mm: ratelimit PFNs busy info message
Signed-off-by: Fabio Berton <fabio.berton@ossystems.com.br>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
|
|
|
|
|
|
| |
This merges the 4.9.17 stable release and syncs the defconfig with
current version.
Change-Id: Ie2da831ef26817f6339e458860d1f64950f17e98
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
|
|
|
|
|
|
|
|
| |
Fix warning:
WARNING: lttng-modules-2.8.0+gitAUTOINC+6e4fc6f36d-r0 do_package:
lttng-modules: no modules were created; this may be due to
CONFIG_TRACEPOINTS not being enabled in your kernel.
Signed-off-by: Fabio Berton <fabio.berton@ossystems.com.br>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
|
|
|
|
|
| |
This upgrades the Linux kernel to the upcoming 4.8.1 release.
Signed-off-by: Fabio Berton <fabio.berton@ossystems.com.br>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This upgrades the Linux kernel to the upcoming 4.6 release. This
includes some NXP related changes, which are target for 4.7. Those
are:
9be3cdc ARM: mx5: dts: Enable USB OTG on M53EVK
fe805c7 ARM: imx_v6_v7_defconfig: add CONFIG_MICREL_PHY
e23d4ee ARM: imx_v6_v7_defconfig: add CONFIG_I2C_GPIO
bc9f274 ARM: dts: imx6ul-14x14-evk: Add audio support
9214de9 ARM: dts: imx6qdl: Remove unneeded unit-addresses
49d0bea clk: imx7d: fix ahb clock mux 1
eda0002 ARM: dts: imx6: apalis: parallel lcd display support on ixora
d9f2c8c ARM: dts: imx6sx-sdb: Add 198MHz operational point
fa13784 ARM: dts: imx28-m28: Remove unneeded partition nodes
67c050c ARM: dts: imx6ul-pico-hobbit: Add initial support
41de276 ARM: dts: imx6: Do not hardcode the CLKO clock
13d63a6 ARM: dts: imx6: Add dts for Embest MarS Board
7d9db51 arm64: defconfig: enable freescale/nxp config options
b9990f8 arm64: defconfig: enable 48-bit virtual addresses
36e1773 arm64: defconfig: cleanup the defconfig
3eb72e5 clk: imx: return correct frequency for Ethernet PLL
4e744f4 ARM: dts: imx6: fix dtc warnings for ipu endpoints
9c17803 ARM: dts: imx6dl: Fix the VDD_ARM_CAP voltage for 396MHz operation
b6e07a8 ARM: dts: imx6sx: Add 198MHz operating point
c4cb697 ARM: dts: imx6ul: Fix operating points
e593654 arm64: dts: ls2080a: fsl-mc dt node updates
dc4a4c1 Documentation: fsl-mc: binding updates for MSIs, ranges, PHYs
43efec0 ARM: dts: imx6q-ba16: use wdog external reset
6a5ebd9 ARM: dts: imx: b450/b650v3: Move ldb_di clk assignment
ecfff5f ARM: dts: imx6q-b850v3: Update display clock source
82b8386 ARM: dts: imx6q-b850v3: Remove ldb panel
b0b039a ARM: dts: imx6qdl-udoo: add 7 inch LCD touchscreen panel support
1d5276b ARM: dts: i.MX3x: add keypad port devicetree nodes
db45d65 ARM: dts: imx35: restore existing used clock enumeration
3af9f8f arm64: dts: ls1043a: add the DTS node for QSPI support
e651264 Documentation: fsl-quadspi: Add fsl,ls1043a-qspi compatible string
5712e33 ARM: dts: ls1021a: add pix clock to DCU dts node
8ad4cee ARM: dts: ls1021a: DSPI has 6 chip-selects
8804a3f ARM: dts: ls1021a: Add gpio support for ls1021a platform
f0f7b30 ARM: dts: imx6q-ba16: Remove unused vqmmc-supply
cb8dacf ARM: dts: ls1021a: add SCFG MSI dts node
4a26cfb ARM: dts: imx28: add alternative pinmuxing for mac0
f407acf ARM: dts: imx6q-tbs2910: fix fec reset polarity
aefe710 ARM: dts: vf610-zii-dev: Add ZII development board.
2045498 ARM: dts: vfxxx: add missing reg properties
95bd770 ARM: dts: vf-colibri: increase NAND clock speed
cbd99f4 ARM: dts: vf-colibri: alias the primary FEC as ethernet0
6216880 ARM: dts: imx6sx-sdb: Add SAI support
b547d70 bindings: fsl-imx-sdma: Document 'fsl,sdma-event-remap' property
e74a168 ARM: dts: imx6sx: Remove unused property
4d9b42e ARM: dts: imx6sx: Fix SAI DMA index
6f7a786 ARM: dts: imx6q-ba16: Disable pwm2 by default
d28c0fc ARM: dts: imx: add Boundary Devices Nitrogen6_SoloX board
d2985a5 ARM: dts: imx6qdl-sabresd: Pass the hannstar panel compatible string
815f031 ARM: dts: imx6: add support for the Ka-Ro electronics 'MB7' baseboard
4531f68 ARM: dts: imx6: add support for more Ka-Ro electronics modules
a5c5a20 ARM: dts: imx6-tx6: enable support for rtscts on UARTs
7686c67 ARM: dts: imx6-tx6: remove LED pinctrl setting from hoggrp
e806f1d6 ARM: dts: imx6-tx6: remove regulator bus
5288f69 ARM: dts: imx: add Boundary Devices Nitrogen6_MAX QP board
84757ea ARM: dts: imx6qdl-tx6: add mdio node for ethernet phy
f756d41 ARM: dts: imx6-tx6: remove container node around pinctrl nodes
72e625a ARM: dts: imx6-tx6: disable the spi node by default
69751fa ARM: dts: imx6-tx6: cleanup; no functional change
0f276c6 ARM: dts: imx6-tx6: Relicense the Ka-Ro DT files under GPLv2/X11
2fb431b ARM: dts: imx25-pinfunc: remove SION for pins with an UART handshaking input mode
7a1e22f ARM: dts: imx25-pinfunc: add all UART mux modes
395dbf3 ARM: dts: imx: ba16: Add correct PCIe Tx Values
b872157 ARM: dts: imx6ul: add support for Ka-Ro electronics TXUL mainboard
290d3f9 ARM: dts: imx6ul: add support for Ka-Ro electronics TXUL modules
2ce39b6 ARM: dts: vf610-colibri: enable display controller
8411ccb ARM: dts: vf610: add display nodes
4c36ca7 ARM: dts: imx: add Boundary Devices Nitrogen7 board
b46656d ARM: dts: imx7d: add flexcan support
d587538 ARM: dts: imx7d: add lcdif support
b1334df arm64: dts: ls2080a: Add compatible "fsl,ls2080a-gpio" for ls2080a gpio nodes
8e403e3 arm64: dts: ls1043a: Add compatible "fsl,qoriq-gpio" for ls1043a gpio nodes
9c3e8d5 arm64: dts: ls2080a: update the DTS for QSPI and DSPI support
d03665c Documentation: fsl: dspi: Add fsl,ls2080a-dspi compatible string
0e01fa6 arm64: dts: ls1043a-rdb: add the DTS for DSPI support
5139b339 ARM: multi_v5_defconfig: Enable recommended options for systemd
c29da9c4 ARM: imx: always use TWD on IMX6Q
dbcb3b1 clk: imx: vf610: fix whitespace in vf610-clock.h
7115a09 clk: imx: vf610: add TCON ipg clock
9241416 clk: imx: vf610: fix DCU clock tree
be27a3e ARM: multi_v5_defconfig: Enable support for MX21/MX27
4cedc0d ARM: imx_v6_v7_defconfig: add CONFIG_RTC_DRV_M41T80
7241dc3 ARM: imx_v6_v7_defconfig: add CONFIG_I2C_MUX_GPIO
a60e2c2 ARM: imx_v6_v7_defconfig: add FT5x06 and TSC2004 touch support
e4ca550 clk: imx: add ckil clock for i.MX7
118e922 clk: imx: vf610: add suspend/resume support
189c8c1 clk: imx: vf610: add WKPU unit
ef2f187 clk: imx: vf610: leave DDR clock on
9a0e7b6 clk: imx: clk-gate2: allow custom gate configuration
4ecea9b clk: imx6sx: Register SAI clocks as shared clocks
abb9468 arm64: dts: add LS1043a-QDS board support
d6505c6 Documentation: DT: Add entry for Freescale LS1043a-QDS board
Change-Id: Ia4693a462743e532d412fb3213cfee1149496c8a
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
|
|
|
|
|
|
|
|
| |
Introduce Linux 4.4 based vanilla Linux kernel. This version
allows to use the DRM DCU driver on Vybrid (with some additional
patches). Also enable PWM support through Vybrid's FlexTimer
module, and update the defconfigs.
Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
|
|
|
|
|
|
|
|
| |
Besides the revision change, this synchronizes the defconfig used for
the i.MX and the Vybrid SoCs. The only SoCs using a specific defconfig
file are the MXS-based ones (i.MX23 and i.MX28) as the others are
consolidated on the single defconfig file.
Change-Id: Id00d6dbaa8fcec5c9b6c5089d11d1ebe5c0e44e1
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
|
|
|
|
|
|
|
|
| |
This reverts commit 649f479f118567d62a5a57d690fb3fe3915f0ea7.
The 4.3 version of kernel cause build errors on lttng and cannot be
included until those are fix. We are reverting it now and will add it
back once OE-Core is fixed to support it.
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
|
|
|
|
|
|
|
| |
Besides the revision change, this synchronizes the defconfig used for
the i.MX and the Vybrid SoCs. The only SoCs using a specific defconfig
file are the MXS-based ones (i.MX23 and i.MX28) as the others are
consolidated on the single defconfig file.
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
|
|
|
|
|
|
| |
Add an optimized defconfig for Vybrid which includes NFC (NAND) and
DCU (fbdev) support for Vybrid.
Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
The meta-fsl-arm is going to be used as the base for this layer. It
contains a clean history and allowing a more granullar set of changes.
This commit is just a rename of all contents of meta-fsl-arm
subdirectory to this layer's root, subsequent changes are based on top
of that.
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|