| Commit message (Collapse) | Author | Age | Files | Lines |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
f7b43f8b4c Merge remote-tracking branch 'origin/imx_v2021.04' into lf_v2021.04
1097bb9155 LFU-287 i.MX6SX: Update entropy delay range(min-max)
6a06cd8a54 net: phy: atheros: avoid error in ar803x_of_init() when PHY has no OF node
0e1d747e44 LFU-282 arm: dts: imx8mq-pinfunc: sync with linux 5.15
2f2f8d05fc imx8ulp_evk: typo fix
d7c7988fca LF-5477: i.MX8: Add support for DXL B0 FIPS enabled parts
132ad32a05 board: ls1046ardb: force PCI device enumeration
57024739f3 board: ls1043ardb: force PCI device enumeration
a95628694f LF-5449: i.MX8DXL reboot fails with u-boot spl
c4b990c8ed LFU-258 clk: imx8dxl: remove QXP specific clocks
927a9bcc8b MLK-25820 fat_write: fix wrong short name check when no ext
d5eec634d7 LF-4920 i.MX8ULP: Device tree patching
24e89362b6 LF-5372: Reserve DDR ECC region for DXL
60ab0aab92 MA-19963 imx8mp: disable CONFIG_SPL_SYS_MALLOC_SIMPLE in SPL
5b2dbad8e5 LF-5280-5 mx7ulp_evk: Enable HX8394F panel driver
1d1bb36610 LF-5280-4 dts: imx7ulp-evk: Update DTS to use HX8394F panel
2f7c486094 LF-5280-3 imx8ulp_evk: Update defconfig to enable HX8394F driver
7abadebf77 LF-5280-2 dts: imx8ulp_evk: replace RM68200 by HX8394F panel
b0acbae771 LF-5280-1 video: Add new DSI panel rocktech himax8394f
7b511db643 LF-5298: imx8dxl: Add support for DXL B0 SOC
34d2e9fab6 board: ls1088a: update ifc node name to be memory-controller
66d6975d19 pci: Update the highest subordinate bus number for bridge setup
a214ced1a2 LF-4459 imx8mn ddr3l: rdc: remove mcu memory limit
7b84c587ba MLK-25803-2: Update VID/PID
d6363d942b MLK-25803-1: Update WCID interface GUID
bad5cf456d LF-5160 imx8ulp: upower: Update the upower api
455c7b5f76 LFU-272 imx8ulp: Load the lposc fuse for dual boot
998cde6f8f LFU-271-2 imx8ulp_evk: Skip init DDR for reboot in dual boot mode
4472040eb4 LFU-271-1 imx8ulp: Change LPAV assignment for dual boot
59767ae128 LF-5091: spi: nxp_fspi: fix some odd address read issues
32d11632e6 LFU-270 ddr: imx8m: Fix DDR inline ECC scruber configuration
4903f1eddd Pull request #43: LFU-243: ls1021atwr: caam: Enable Uboot validaion in SPL.
c364a6d11d LFU-243: ls1021atwr: caam: Enable Uboot validaion in SPL.
8b129ca3f7 LF-5143 imx8ulp_evk: spl: fix ND/LD voltage
08a4e8c491 MA-19871 Set RDC/CSU policy by default for secure video pipeline
c4b95606ac LF-5115 imx8m*/ulp: fix mem args for jailhouse boot
2f3f057bf1 MA-19864 imx8mq: correct rdc domain ID defination
f3033e7d3e MA-19864 imx8m: Add RDC config functions
85295dfa32 MA-19823 imx8ulp libavb: get AHAB status
257a4c2d4f drivers: net: Soft reset felix switch core
32146ec798 pci: layerscape: fix the build error on LS1021A
6753d3082c configs: enabled DTB overlay feature for LS SoCs
519c3ee4ae fsl-layerscape: add dtb overlay feature
5c2735a6d3 pci: layerscape: update the searching compatible of LX2160A PCIe
Signed-off-by: Tom Hochstein <tom.hochstein@nxp.com>
(cherry picked from commit 0fc7fbbc921e815cf1cab8917a091bd16132bb7d)
|
|
|
|
|
|
|
|
|
|
| |
From the patch 0001-Add-support-for-overriding-BL32-and-BL33-not-only-BL.patch
an occurrence of tee.bin wasn't replaced by $BL32.
In addition, this patch use $BL31 and $BL32 value, in a displayed line, instead
hardcoded values.
Signed-off-by: Thomas Perrot <thomas.perrot@bootlin.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
imx-mkimage is compiled with the host gcc, thus if one needs to add
explicit linker flags one should use BULD_LDFLAGS, not the ones
forseen for the cross compiler.
Prevents, on distros with an older gcc (e.g. OpenSuse 15.3 with gcc 7.5.0),
the following error.
| Compiling mkimage_imx8
| gcc -O2 -Wall -std=c99 -I .../imx-boot/1.0-r0/recipe-sysroot-native/usr/include -L .../imx-boot/1.0-r0/recipe-sysroot-native/usr/lib
mkimage_imx8.c -o mkimage_imx8 -Wl,-O1 -Wl,--hash-style=gnu -Wl,--as-needed -fmacro-prefix-map=.../imx-boot/1.0-r0=/usr/src/debug/imx-boot/1.0-r0
-fdebug-prefix-map=.../imx-boot/1.0-r0=/usr/src/debug/imx-boot/1.0-r0 -fdebug-prefix-map=.../imx-boot/1.0-r0/recipe-sysroot=
-fdebug-prefix-map=.../imx-boot/1.0-r0/recipe-sysroot-native= -Wl,-z,relro,-z,now -lz
| gcc: error: unrecognized command line option ‘-fmacro-prefix-map=.../imx-boot/1.0-r0=/usr/src/debug/imx-boot/1.0-r0’
| make[1]: *** [soc.mak:87: mkimage_imx8] Error 1
Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com>
|
|\
| |
| | |
simplify the use of imx-boot-containers
|
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
Choosing if the boot container FIT image is built with imx-mkimage/
imx-boot or the U-Boot provided binman can be done with the
imx-boot-container MACHINEOVERRIDES.
Change the used overrides from *nxp-bsp to *generic-bsp.
Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com>
|
| |
| |
| |
| |
| |
| | |
When the variable BL31 is empty, BL33 was initialized instead of BL31.
Signed-off-by: Thomas Perrot <thomas.perrot@bootlin.com>
|
|/
|
|
|
|
|
| |
This script gives the address, the offset and the size of binaries have been
stored into U-Boot FIT image that contains TF-A, U-Boot and OP-TEE.
Signed-off-by: Thomas Perrot <thomas.perrot@bootlin.com>
|
|
|
|
| |
Signed-off-by: Khem Raj <raj.khem@gmail.com>
|
|
|
|
|
|
|
| |
It is already internally provided by the recipe, so
don't need to depends on a external provider.
Signed-off-by: Vinicius Aquino <vinicius.aquino@ossystems.com.br>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
gnutls is now required in order to build one of the host tools which are part
of U-Boot.
| .../build/tmp-glibc/work/x86_64-linux/u-boot-fslc-mxsboot-native/v2022.04+gitAUTOINC+f885198273-r0/git/tools/mkeficapsule.c:21:10: fatal error: gnutls/gnutls.h: No such file or directory
| #include <gnutls/gnutls.h>
| ^~~~~~~~~~~~~~~~~
| compilation terminated.
| make[2]: *** [scripts/Makefile.host:95: tools/mkeficapsule] Error 1
| make[2]: *** Waiting for unfinished jobs....
| make[1]: *** [.../build/tmp-glibc/work/x86_64-linux/u-boot-fslc-mxsboot-native/v2022.04+gitAUTOINC+f885198273-r0/git/Makefile:1894: tools] Error 2
| make[1]: Leaving directory '.../build/tmp-glibc/work/x86_64-linux/u-boot-fslc-mxsboot-native/v2022.04+gitAUTOINC+f885198273-r0/build'
| make: *** [Makefile:177: sub-make] Error 2
| make: Leaving directory '.../build/tmp-glibc/work/x86_64-linux/u-boot-fslc-mxsboot-native/v2022.04+gitAUTOINC+f885198273-r0/git'
| ERROR: oe_runmake failed
| WARNING: .../build/tmp-glibc/work/x86_64-linux/u-boot-fslc-mxsboot-native/v2022.04+gitAUTOINC+f885198273-r0/temp/run.do_compile.24796:186 exit 1 from 'exit 1'
Signed-off-by: Trevor Woerner <twoerner@gmail.com>
|
|\
| |
| | |
Upgrade u-boot-fslc to v2022.04
|
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
U-Boot fork has been updated to include new version v2022.04 from
upstream.
Following commits were ported from 2022.01+fslc revision:
----
f885198273 imx: iMX6: Define disconnect_from_pc function
1667c942d0 MLK-21854-2 imx: uuu: Update autoboot to run uuu or fastboot
c7805ae3cf pico-imx6ul, pico-imx7d: Explain how to use eMMC user partition
92268e6c2a mx6sabre_common: Dynamically change the video output
f66f12923e mx6sabresd: Enable video interfaces in bootargs
----
Update U-Boot recipe versions and point to new revision.
Signed-off-by: Andrey Zhizhikin <andrey.z@gmail.com>
|
|/
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
When ld-is-gold is defined as a DISTRO_FEATURE, the gold linker is used
by default, which causes the following do_compile errors to arise:
| ../../generated/release/lib/libvvdisplay_shared.so: error: undefined
reference to 'wl_buffer_interface'
| ../../generated/release/lib/libvvdisplay_shared.so: error: undefined
reference to 'wl_surface_interface'
| ../../generated/release/lib/libvvdisplay_shared.so: error: undefined
reference to 'wl_seat_interface'
| ../../generated/release/lib/libvvdisplay_shared.so: error: undefined
reference to 'wl_output_interface'
| ../../generated/release/lib/libvvdisplay_shared.so: error: undefined
reference to 'wl_proxy_marshal'
| ../../generated/release/lib/libvvdisplay_shared.so: error: undefined
reference to 'wl_proxy_add_listener'
| ../../generated/release/lib/libvvdisplay_shared.so: error: undefined
reference to 'wl_proxy_destroy'
| ../../generated/release/lib/libvvdisplay_shared.so: error: undefined
reference to 'wl_display_flush'
| ../../generated/release/lib/libvvdisplay_shared.so: error: undefined
reference to 'wl_display_disconnect'
| ../../generated/release/lib/libvvdisplay_shared.so: error: undefined
reference to 'wl_proxy_marshal_constructor_versioned'
| ../../generated/release/lib/libvvdisplay_shared.so: error: undefined
reference to 'wl_compositor_interface'
| ../../generated/release/lib/libvvdisplay_shared.so: error: undefined
reference to 'wl_display_dispatch'
| ../../generated/release/lib/libvvdisplay_shared.so: error: undefined
reference to 'wl_proxy_marshal_constructor'
| ../../generated/release/lib/libvvdisplay_shared.so: error: undefined
reference to 'wl_display_roundtrip'
| ../../generated/release/lib/libvvdisplay_shared.so: error: undefined
reference to 'wl_display_connect'
| ../../generated/release/lib/libvvdisplay_shared.so: error: undefined
reference to 'wl_registry_interface'
so use bfd linker instead.
Signed-off-by: Chris Dimich <chris.dimich@boundarydevices.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The imx8dx-mek machine is similar to imx8qxp-mek and so the mx8qxp override
was included in the MACHINEOVERRIDES hierarchy. This is non-standard, and
the rework of the SOC overrides didn't handle it properly, leading to a
build break:
```
Log data follows:
| DEBUG: Executing shell function do_compile
| NOTE: 8QX boot binary build
| cp: failed to access '/home/aquino/src/ossystems/oel-platform/build/tmp/work/imx8dx_mek-oel-linux/imx-boot/1.0-r0/git/iMX8DX/scfw_tcm.bin': Not a directory
| WARNING: /home/aquino/src/ossystems/oel-platform/build/tmp/work/imx8dx_mek-oel-linux/imx-boot/1.0-r0/temp/run.do_compile.1809636:179 exit 1 from 'cp /home/aquino/src/ossystems/oel-platform/build/tmp/deploy/images/imx8dx-mek/imx-boot$
tools/scfw_tcm.bin /home/aquino/src/ossystems/oel-platform/build/tmp/work/imx8dx_mek-oel-linux/imx-boot/1.0-r0/git/iMX8DX/scfw_tcm.bin'
| WARNING: Backtrace (BB generated script):
| #1: compile_mx8x, /home/aquino/src/ossystems/oel-platform/build/tmp/work/imx8dx_mek-oel-linux/imx-boot/1.0-r0/temp/run.do_compile.1809636, line 179
| #2: do_compile, /home/aquino/src/ossystems/oel-platform/build/tmp/work/imx8dx_mek-oel-linux/imx-boot/1.0-r0/temp/run.do_compile.1809636, line 151
| #3: main, /home/aquino/src/ossystems/oel-platform/build/tmp/work/imx8dx_mek-oel-linux/imx-boot/1.0-r0/temp/run.do_compile.1809636, line 189
ERROR: Task (/home/aquino/src/ossystems/oel-platform/sources/meta-freescale/recipes-bsp/imx-mkimage/imx-boot_1.0.bb:do_compile) failed with exit code '1'
```
Fix the problem by removing mx8qxp from the mx8dx hierarchy and adapting
existing mx8qxp overrides appropriately.
Fixes: #1027
Signed-off-by: Tom Hochstein <tom.hochstein@nxp.com>
|
|
|
|
|
|
|
|
|
|
|
|
| |
* Add dma-heap allocator
* Documentation and typo fixes
* Use RW flags in ION allocator if no mapping
flags are specified
* Add checks for attempts to map already mapped
buffers with different flags than in the
original mapping
Signed-off-by: Carlos Rafael Giani <crg7475@mailbox.org>
|
|
|
|
| |
The NR_DEVICE_TREE_BASLER variable has the wrong path.
|
|
|
|
|
|
|
|
|
|
|
|
| |
Since OE-Core commit 9379f80f48 ("license/insane: Show warning for
obsolete license usage"), LICENSE field not containing SPDX identifiers
are treated with WARNING.
An automated conversion using scripts/contrib/convert-spdx-licenses.py to
convert to use the standard SPDX license identifiers has been done on
the entire layer.
Signed-off-by: Andrey Zhizhikin <andrey.z@gmail.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This rework the recipes making use of new imx-nxp-bsp override; it
has been applied to:
- gstreamer1.0
- gstreamer1.0-plugins-bad
- gstreamer1.0-plugins-base
- gstreamer1.0-plugins-good
- imx-alsa-plugins
- imx-codec
- imx-gst1.0-plugin
- imx-parser
- libdrm
- libimxdmabuffer
- linux-fslc-imx
- linux-imx
- optee-client
- optee-test
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
|
|
| |
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
|
|
| |
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
|
|
| |
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
|
|
|
|
|
| |
The compilation vary depending on the target SoC we wish to use so we
must ensure it doesn't end in generic architecture feed.
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This rework the recipes making use of new imx-generic-bsp override; it
has been applied to:
- alsa-state
- firmware-imx
- imx-kobs
- imx-test
- imx-uuc
- linux-fslc
- linux-fslc-lts
- packagegroup-fsl-mfgtool
- u-boot-fslc
- uuu
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
|
|
| |
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Essentially, we extend the overrides to a generic-bsp, nxp-bsp, and
mainline-bsp.
So, for example, the mx8mq override is split into:
- imx-generic-bsp: compatible with every i.MX SoC and both BSP variants
- imx-nxp-bsp: compatible with every i.MX SoC but specific to NXP BSP
- imx-mainline-bsp: compatible with every i.MX SoC but specific to Mainline BSP
- mx8-generic-bsp: compatible with every i.MX8 SoC and both BSP variants
- mx8-nxp-bsp: compatible with every i.MX8 SoC but specific to NXP BSP
- mx8-mainline-bsp: compatible with every i.MX8 SoC but specific to Mainline BSP
- mx8m-generic-bsp: compatible with every i.MX8M SoC and both BSP variants
- mx8m-nxp-bsp: compatible with every i.MX8M SoC but specific to NXP BSP
- mx8m-mainline-bsp: compatible with every i.MX8M SoC but specific to Mainline BSP
- mx8mq-generic-bsp: compatible with every i.MX8MQ SoC and both BSP variants
- mx8mq-nxp-bsp: compatible with every i.MX8MQ SoC8 but specific to NXP BSP
- mx8mq-mainline-bsp: compatible with every i.MX8MQ SoC but specific to Mainline BSP
The extender mechanism is responsible for extending the override list to
include the generic overrides. We can then use the three different
variants to handle the metadata correctly.
Generically speaking, the conversion mainly was automated (with a lot of
back and forth until getting it right).
To convert an existing layer, the following script can be used:
```sh
git ls-files classes recipes-* \
| xargs sed -i \
-e 's,:\(mx[6-8]\w*\),:\1-nxp-bsp,g' \
-e 's,(\(mx[6-8]\w*\)),(\1-nxp-bsp),g' \
-e 's,\(mx[6-8]\w*\)|,\1-nxp-bsp|,g' \
-e 's,|\(mx[6-8]\w*\)),|\1-nxp-bsp),g' \
\
-e 's,:\(mx[5s]\w*\),:\1-generic-bsp,g' \
-e 's,(\(mx[5s]\w*\)),(\1-generic-bsp),g' \
-e 's,\(mx[5s]\w*\)|,\1-generic-bsp|,g' \
-e 's,|\(mx[5s]\w*\)),|\1-generic-bsp),g' \
\
-e 's,:\(vf\w*\),:\1-generic-bsp,g' \
-e 's,:\(vf[56]0\w*\),:\1-generic-bsp,g' \
-e 's,\(vf\w*\)|,\1-generic-bsp|,g' \
-e 's,|\(vf\w*\)),|\1-generic-bsp),g' \
-e 's,\(vf[56]0\w*\)|,\1-generic-bsp|,g' \
-e 's,|\(vf[56]0\w*\)),|\1-generic-bsp),g' \
\
-e 's,:\(imx\) ,:\1-nxp-bsp ,g' \
-e 's,(\(imx\)),(\1-nxp-bsp),g' \
-e 's,\(imx\)|,\1-nxp-bsp|,g' \
-e 's,|\(imx\)),|\1-nxp-bsp),g'
for d in $(find -type d | egrep '/mx[6-8]w*'); do
git mv $d $d-nxp-bsp
done
for d in $(find -type d | egrep '/imx$'); do
git mv $d $d-nxp-bsp
done
for d in $(find -type d | egrep '/mx[5s]w*'); do
git mv $d $d-generic-bsp
done
```
Fixes: #791.
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
|
|
| |
Signed-off-by: Tom Hochstein <tom.hochstein@nxp.com>
|
|
|
|
| |
Signed-off-by: Tom Hochstein <tom.hochstein@nxp.com>
|
|\
| |
| | |
imx-atf: add mark quotation to prevent build issue with ccache
|
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
Otherwise, when ccache is enable the following issue occurs:
Log data follows:
| DEBUG: Executing shell function do_compile
| NOTE: make -j 8 CROSS_COMPILE=aarch64-oe-linux- PLAT=imx8qx LD=aarch64-oe-linux-ld CC=ccache aarch64-oe-linux-gcc bl31
| make: *** No rule to make target 'aarch64-oe-linux-gcc'. Stop.
| ERROR: oe_runmake failed
| WARNING: exit code 1 from a shell command.
Signed-off-by: Thomas Perrot <thomas.perrot@bootlin.com>
|
| |
| |
| |
| |
| |
| |
| | |
The latest imx-vpu-hantro-daemon fails to download and has been reverted
to the previous version, so revert this version as well.
This reverts commit ddbc40ac9cb001f1e16da218a08f3a3a43b29dbb.
|
|/
|
|
|
|
|
|
|
|
|
|
|
| |
The new package fails to download, so revert this for now.
$ wget https://www.nxp.com/lgfiles/NMG/MAD/YOCTO//imx-vpu-hantro-daemon-1.1.1.tar.gz
--2022-02-04 13:19:34-- https://www.nxp.com/lgfiles/NMG/MAD/YOCTO//imx-vpu-hantro-daemon-1.1.1.tar.gz
Resolving www.nxp.com (www.nxp.com)... 104.94.208.185
Connecting to www.nxp.com (www.nxp.com)|104.94.208.185|:443... connected.
HTTP request sent, awaiting response... 304 Not Modified
2022-02-04 13:19:35 ERROR 304: Not Modified.
This reverts commit 4d713c80302466a3d4d2b33e071cfeeb866aa548.
|
|\
| |
| | |
u-boot-imx and recipes-bsp for 5.10.72-2.2.0
|
| |
| |
| |
| | |
Signed-off-by: Tom Hochstein <tom.hochstein@nxp.com>
|
| |
| |
| |
| |
| |
| | |
Drop the upstream patch: 0001-isp-imx-drop-use-of-__TIME__-__DATE__.patch.
Signed-off-by: Tom Hochstein <tom.hochstein@nxp.com>
|
| |
| |
| |
| | |
Signed-off-by: Tom Hochstein <tom.hochstein@nxp.com>
|
| |
| |
| |
| | |
Signed-off-by: Tom Hochstein <tom.hochstein@nxp.com>
|
| |
| |
| |
| | |
Signed-off-by: Tom Hochstein <tom.hochstein@nxp.com>
|
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
Fixes:
```
a26b1ee MLK-25735-3: ignore empty v4l2 output buffer
923cf16 MLK-25735-2: rename NV12M_8L128 to NV12MT_8L128
21c89c5 MLK-25735: mxc_v4l2_vpu_test: support display decoded picture using wayland
9d8e867 MLK-25721 mxc_v4l2_vpu_test: support more encoder input format
d45624e MLK-25685 mxc_v4l2_vpu_test: avoid repeatedly release pitcher_buffer
```
Signed-off-by: Tom Hochstein <tom.hochstein@nxp.com>
|
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
Fixes:
3e8ad6b license update
78d7375 V2XA-732, V2XA-733: update v2x test with SM4 CCM examples
cf16424 V2XA-733: hsm lib: key generic crypto service
639a845 V2XA-732, V2XA-733: add SM4 CCM support and generic crypto service
faa80e4 HSM-590: license update
Signed-off-by: Tom Hochstein <tom.hochstein@nxp.com>
|
| |
| |
| |
| | |
Signed-off-by: Tom Hochstein <tom.hochstein@nxp.com>
|
| |
| |
| |
| | |
Signed-off-by: Tom Hochstein <tom.hochstein@nxp.com>
|
| |
| |
| |
| |
| |
| |
| |
| | |
Append a tag to the bootloader image used in the SD card image. The tag
contains the size of the bootloader image so UUU can easily find the end of
the bootloader in the SD card image.
Signed-off-by: Tom Hochstein <tom.hochstein@nxp.com>
|
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
Fixes:
----
263b27e076 Merge remote-tracking branch 'origin/imx_v2021.04' into lf_v2021.04
fca2f7effd LFU-260: Move OS authentication to separate file
7c4108c79d LFU-260: Add 8ULP secure boot documentation
e74e2b3266 LFU-260: Update AHAB introduction with 8ulp
8638693fac Merge remote-tracking branch 'origin/imx_v2021.04' into lf_v2021.04
300e945534 LFU-263-2 i2c: mxc_i2c: fix i2c recovery issue
bf68761d1b LFU-263-1 gpio: add a marco to mask gpio input and output bits
c44cb5c20a Merge remote-tracking branch 'origin/imx_v2021.04' into lf_v2021.04
54654fe63a SSI-118 crypto/fsl: Enable U-boot Command to expose CAAM RNG
3a24267a67 Merge remote-tracking branch 'origin/imx_v2021.04' into lf_v2021.04
ee461bc762 LF-4842-3 imx8ulp: Configure the Watchdog to 32bits command mode
1097b2d662 LF-4842-2 imx: ulp: Fix issue in checking WDOG UNLOCK flag
c0f4209640 LF-4842-1 ulp_wdog: Update ulp wdog driver for 32bits command
5604b38bf7 LFU-262 misc: imx8ulp: Add OEM SRK Hash fuse support
00602e19f4 LFU-261 imx8ulp: Set COUNTER_FREQUENCY to 1Mhz
cf7217b58c Merge remote-tracking branch 'origin/imx_v2021.04' into lf_v2021.04
d4acb9e05f MA-19692 Load the avb footer from storage
5421f32712 Merge remote-tracking branch 'origin/imx_v2021.04' into lf_v2021.04
8816d0a532 MA-19663 Configure boot security patch level
af0b460ed1 LF-4826 imx8ulp: enable MU0_B clk by default
644b74776d Merge remote-tracking branch 'origin/imx_v2021.04' into lf_v2021.04
aa83e61757 Merge remote-tracking branch 'origin/imx_v2021.04' into lf_v2021.04
47da90b0b4 LFU-257 tcpc: mask fault status interrupt
83c2ac165d Merge remote-tracking branch 'origin/imx_v2021.04' into lf_v2021.04
f438a41c53 LFU-255 Fix coverity issue: 17949208 Lossy integer to pointer
d50d975e9c Merge remote-tracking branch 'origin/imx_v2021.04' into lf_v2021.04
2e54fedc14 LFU-256 imx8ulp: cgc: Switch to NICLPAV to FRO192 before PLL4 init
4de62a7f5d LF-4677-4 spi: nxp_fspi: enable octal dtr support and fix odd address issue
19cc4ce35b LF-4677-3 dts: imx8dxl: set tx/rx line and slave line delay
86cd141d73 LF-4677-2 configs: imx8dxl: enable mt35xu512aba octal dtr support
6e84dbbcd3 LF-4677-1 mtd: spi-nor-core: some fixes for the mt35xu512aba chip
b49a4a2520 mtd: spi-nor-core: Allow using Micron mt35xu512aba in Octal DTR mode
c7bcd9bd5d mtd: spi-nor-core: Add support for Cypress Semper flash
72bbb5c1ec mtd: spi-nor-core: Add non-uniform erase for Spansion/Cypress
5161305dba mtd: spi-nor-core: allow truncated erases
a3bd5abf1f mtd: spi-nor-core: Perform a Soft Reset on boot
d1e8045c7f mtd: spi-nor-core: Perform a Soft Reset on shutdown
982221a18c mtd: spi-nor-core: Detect Soft Reset sequence support from BFPT
30a8d4329c mtd: spi-nor-core: Do not make invalid quad enable fatal
6a36762098 mtd: spi-nor-core: Enable octal DTR mode when possible
ac38926ca8 mtd: spi-nor-core: Prepare Read SR and FSR for Octal DTR mode
17090cab74 mtd: spi-nor-core: Parse xSPI Profile 1.0 table
817c535f11 mtd: spi-nor-core: Get command opcode extension type from BFPT
63fed9cce4 mtd: spi-nor-core: prepare BFPT parsing for JESD216 rev D
bcc2c51e72 mtd: spi-nor-core: Add support for DTR protocol
6778b8eb18 mtd: spi-nor-core: Do not set data direction when there is no data
87eedf171e mtd: spi-nor-core: Rework hwcaps selection
be9e93d93b mtd: spi-nor-core: Introduce flash-specific fixup hooks
ae20033bb4 mtd: spi-nor-core: Move SFDP related declarations to top
3d81385d8c mtd: spi-nor-core: Add a ->setup() hook
0bf516c92d mtd: spi-nor-core: Fix address width on flash chips > 16MB
44afb32ba2 spi: cadence-qspi: Add support for octal DTR flashes
ba34935aec spi: cadence-qspi: Add a small delay before indirect writes
e67dde63fe spi: cadence-qspi: Do not calibrate when device tree sets read delay
c547fd2f42 spi: spi-mem: add spi_mem_dtr_supports_op()
007587896a spi: spi-mem: export spi_mem_default_supports_op()
f84891cf89 spi: spi-mem: allow specifying a command's extension
68ca48eb32 spi: spi-mem: allow specifying whether an op is DTR or not
827fe11231 Merge remote-tracking branch 'origin/imx_v2021.04' into lf_v2021.04
030b02d3fd LFU-119 imx8qm/qxp: Fix Unchecked return value
7c17b7c44c Merge remote-tracking branch 'origin/imx_v2021.04' into lf_v2021.04
2808f71620 LFU-253 video: sec_mipi_dsim: Fix Division or modulo by zero
c58f545d85 LFU-254 DTS: imx8mm-evk: Enable I2C1 bus
34710728a8 imx8ulp: add ND/LD clock
7e64f98814 Merge remote-tracking branch 'origin/imx_v2021.04' into lf_v2021.04
9890eb42c6 Merge remote-tracking branch 'origin/imx_v2021.04' into lf_v2021.04
2f2a5a1e2e LFU-251 doc: imx: habv4: Add clarification and updates to HABv4 documentation
76df1d9421 LFU-252 imx8ulp: upower: Enable AFBB for AP domain
2aeeba3613 Merge remote-tracking branch 'origin/imx_v2021.04' into lf_v2021.04
c184579f00 LF-4785-2 imx8ulp: clock: Handle the DDRLOCKED when setting DDR clock
30598b0b69 LF-4785-1 ddr: imx8ulp: Fix DDR frequency request issue
822a21a7e0 Merge remote-tracking branch 'origin/imx_v2021.04' into lf_v2021.04
b4f4659fc2 LF-4724 ddr: saving the dram config timing data into sram on imx8ulp
fbf4af9cfb Merge remote-tracking branch 'origin/imx_v2021.04' into lf_v2021.04
6c3e72953b LFU-250 thermal: imx_pmc_temperature: Fix build warning
0f0034ba49 Merge remote-tracking branch 'origin/imx_v2021.04' into lf_v2021.04
10c3b9375d MA-19553 Guard mppubk extraction function
6c88119259 Merge remote-tracking branch 'origin/ls_v2021.04' into lf_v2021.04
67e6ee87f8 drivers: ddr: lc_common_dimm_params.c : Fix Divison by zero issue
74223109f9 Merge remote-tracking branch 'origin/imx_v2021.04' into lf_v2021.04
d4cbd6962e LFU-249 imx8mm_evk: Enable USB ethernet support
4fc71a7d4f LFU-248 imx8ulp_evk: Update LPDDR4 PHY settings
eb07ea8fbf Merge remote-tracking branch 'origin/ls_v2021.04' into lf_v2021.04
84b60666a3 board: freescale: lx2160a: fix out of bounds write
6e5264a01d drivers: net: phy: in112525: fix out of bounds write
76dbd11910 Merge remote-tracking branch 'origin/imx_v2021.04' into lf_v2021.04
9f08e16a29 MA-19357 imx8mq: enhance security for android
a9bbf7a158 MA-19440 Support boot header v4
1b38984122 Merge remote-tracking branch 'origin/imx_v2021.04' into lf_v2021.04
72c4fff475 LFU-242-2 imx8ulp_evk: fix build warning
e82827e401 LFU-242-1 imx8ulp_evk: reset lsm6dsx when uboots boots
6c73e3fee5 LFU-239-4 arm: dts: imx8ulp: add the I3C bus support
7b4f9c1d70 LFU-239-3 imx8ulp_evk_i3c: Add I3C controller support
b986805e72 LFU-239-2 imx8ulp: clock: Add clock support for i3c controller
beb31e82d7 LFU-239-1 i2c: imx-i3c: add i3c bus support in i2c subsystem
a2ca81dc77 LFU-247-2 video: sec_dsim: Update DPHY PLL PMS and DPHY timing settings
2560cd096e LFU-247-1 imx8m: clock: Add function to get DSI PHY reference clock rate
66f8932af0 LFU-246 fastboot: Update fastboot emmc boot part size
396a703614 Merge remote-tracking branch 'origin/imx_v2021.04' into lf_v2021.04
41ca41efcd LFU-238-5 configs: imx8ulp: Enable pmc temperature senor
e86825980e LFU-238-4 arm: imx8ulp: implement to obtain the SoC current temperature
07743019ad LFU-238-3 arm: dts: add the PMC node and the ADC1 node
1551d5ac1f LFU-238-2 imx8ulp: measure die temperature using PMC Temperature Sensor
c22d6cf6b4 LFU-238-1 imx8ulp: clock: Support to enable/disable the ADC1 clock
8de08ed09c LFU-244 imx8mp: Add SC part (iMX8MP UltraLite) support
8af330f822 LFU-245 imx8ulp: upower: Fix license issue
a26f622273 Merge remote-tracking branch 'origin/ls_v2021.04' into lf_v2021.04
695462db67 board: fsl_validate: Fix Double free Issue
1d6ea40388 Merge remote-tracking branch 'origin/imx_v2021.04' into lf_v2021.04
5569a50da6 LF-4589 crypto/fsl: i.MX8ULP: Fix kick_trng for i.MX8ULP
cd3879da56 Merge remote-tracking branch 'origin/ls_v2021.04' into lf_v2021.04
bca2fff552 pci: layerscape: Fix the LUT and msi-map mismatch issue
1c0116f3da Merge remote-tracking branch 'origin/imx_v2021.04' into lf_v2021.04
48f7b4ced9 efi_loader: Improve the parameter check for QueryVariableInfo()
4bd16004ba Merge remote-tracking branch 'origin/ls_v2021.04' into lf_v2021.04
6a18094114 lx2162a : Rename emmc boot command variable
ab74b13c41 Merge remote-tracking branch 'origin/imx_v2021.04' into lf_v2021.04
b1f567e7d1 LFU-237-2 imx8ulp: Update ethernet mac to get from fuse
4f425dbb74 LFU-237-1 fuse: imx8ulp: Fix wrong words of bank 5 and 6
b1e985c641 Merge remote-tracking branch 'origin/imx_v2021.04' into lf_v2021.04
4d34e68a4b LFU-236-2 imx: Fix build error and warning in mfgprot
54687c4b42 LFU-236-1 imx: Update FSL_MFGPROT config for iMX8M
5bf76f3224 LF-4375 usb: imx: Fix USB charger detector issue
f583f3df1d Merge remote-tracking branch 'origin/imx_v2021.04' into lf_v2021.04
4fd021a5f7 LFU-230 Fix coverity issue
f3047ca7ee Merge remote-tracking branch 'origin/imx_v2021.04' into lf_v2021.04
d7f3dcb153 MA-19354-2 imx8mn: add mcu rdc config for ddr3l board
c7970f2a21 Merge remote-tracking branch 'origin/imx_v2021.04' into lf_v2021.04
924c6a7763 MA-19354 imx8mn: add mcu rdc config for ddr4 board
13ca08d55e Merge remote-tracking branch 'origin/ls_v2021.04' into lf_v2021.04
b41c0f1c0c configs: ls1046aqds: Configure environment related configs
f52937bfd3 Merge remote-tracking branch 'origin/imx_v2021.04' into lf_v2021.04
b240b9f0dc MA-19353 Fix compressed kernel boot issue
d95fbbff6a Merge remote-tracking branch 'origin/ls_v2021.04' into lf_v2021.04
37726b4733 configs: lx2160a: load device-tree in RAM for distro boot
9f232d8d35 Merge remote-tracking branch 'origin/ls_v2021.04' into lf_v2021.04
81daa5b917 board: freescale: t104xrdb: Set popts->cpo_sample to 0x54 for DDR3
1c64332fcb drivers: ddr: main.c: Fix Bad Shift operator issue
ff38405bc7 drivers: ddr: fsl_ddr_gen4.c: Fix divide by zero issue
07d31c49ae drivers: ddr: util.c: Fix divide by zero issue
8c8fc7f338 Merge remote-tracking branch 'origin/imx_v2021.04' into lf_v2021.04
9435b9a123 MA-19340-2 Enable configs for ID attestation
2786fc5754 MA-19340-1 Enable ID attestation for Android12
4fb4b02fb6 MA-19339 Sync keymaster commands
c58d8993c6 Merge remote-tracking branch 'origin/imx_v2021.04' into lf_v2021.04
8fdf9c3291 MA-19331 imx8m: skip JR probe for android in uboot
15cb5b1520 Merge remote-tracking branch 'origin/ls_v2021.04' into lf_v2021.04
966f02d031 configs: Layerscape: Add 'fdt_addr' env with DRAM address
58ea97abaa configs: Layerscape: Remove the 'fdt_addr' env
f5837340b5 Merge remote-tracking branch 'origin/imx_v2021.04' into lf_v2021.04
ed618ce6a9 LFU-219 crypto/fsl: iMX8M: Disable CAAM JR0 in SPL and Uboot
67c3bfab61 Merge remote-tracking branch 'origin/imx_v2021.04' into lf_v2021.04
3ae061258f LFU-218 imx8ulp_evk: Remove PMIC Bucks PWM mode settings
1cbec64e04 LF-4277 arm: dts: imx8mn: correct spba bus name
d3439c324d LF-4276 arm: dts: imx8mq: add the dwc3 fallback compatible
a9e51f0d10 Merge remote-tracking branch 'origin/imx_v2021.04' into lf_v2021.04
f77c39f607 Merge remote-tracking branch 'origin/imx_v2021.04' into lf_v2021.04
9517bc8ac9 LFU-217-2 spi: fsl_lpspi: Fix copyright problem in lpspi driver
926e7ce3a2 LFU-217-1 imx8ulp: upower: Fix license in upower API
8125abbbc7 LFU-216 imx8ulp_evk: Adjust PMIC i2c iomuxc setting order
dca650dc08 Merge remote-tracking branch 'origin/imx_v2021.04' into lf_v2021.04
ade91a1b1a Pull request #36: LFU-204 crypto/fsl: Add NULL check for CAAM device
0989c988f7 Merge remote-tracking branch 'origin/imx_v2021.04' into lf_v2021.04
20b57dfbb2 LFU-215-2 video: dcnano: Call reset API before video devices init
ca30015402 LFU-215-1 imx8ulp: clock: Support to reset DCNano and MIPI DSI
80fd1f4f99 LFU-214-2 imx8ulp_evk: call the handshake with M33
d1fec2211c LFU-214-1 imx: imx8ulp: Add M33 handshake functions
015094e65e Merge remote-tracking branch 'origin/imx_v2021.04' into lf_v2021.04
61228b7bd1 LFU-168 imx: Fix coverity issue in HAB event decoding
ab2f95e11b LFU-204 crypto/fsl: Add NULL check for CAAM device
ec18689b0b Merge remote-tracking branch 'origin/ls_v2021.04' into lf_v2021.04
ff537efc01 armv8: fsl : create bootcmd and mcinitcmd as per boot source
decb3ac9ec Merge remote-tracking branch 'origin/ls_v2021.04' into lf_v2021.04
03e40d4064 board: fsl_validate: Fix resource leak issue
c2a6072d54 board: freescale: t208xrdb: enable Power-On Reset for rev D boards
beec8294d1 net: fsl-mc: fix logically dead code
680f757e84 drivers: net: aquantia: fix unsigned compared against 0
e79b3359d9 Merge remote-tracking branch 'origin/imx_v2021.04' into lf_v2021.04
29254186d6 MLK-25462: imx8mp_evk: Add nominal drive mode support for LPDDR4 EVK
869ec8e344 Merge remote-tracking branch 'origin/imx_v2021.04' into lf_v2021.04
d9eccf3de6 MA-19311 imx8ulp: android: Enable power domain driver
c1a8697adc MA-19310 imx8ulp: Enable splash screen for android
1a07c7f671 Merge remote-tracking branch 'origin/imx_v2021.04' into lf_v2021.04
bb3255b3e1 LFU-213 imx8ulp_evk: Enable eMMC HS400ES
611bfc2223 Merge remote-tracking branch 'origin/imx_v2021.04' into lf_v2021.04
4e307e4ab7 LFU-211-7: configs: imx8mn ddr3l: ab2: default config
292ab1df29 LFU-211-6: dts: arm: imx8mn: ddr3l ab2 board config support
727c8aad40 LFU-211-5: include: configs: imx8mn ab2: adjust memsize for ddr3l
0e85b585cd LFU-211-4: arm: mach imx: imx8mn: Add ab2 ddr3l target option
ab0b2d5df0 LFU-211-3: board: freescale: imx8mn ab2: ddr3l imx8mn som config
cc9e3ee85b LFU-211-2: board: freescale: imx8mm ab2: spl use SoC name for target config
595934b5f1 LFU-211-1: board: freescale: imx8mm ab2: use SoC name for target config
69c3cafe9d Merge remote-tracking branch 'origin/imx_v2021.04' into lf_v2021.04
6ca1ad73ea MA-19305 imx8ulp: Enable config to set env location
2e972e4aa6 MA-19048-1 MCU security enhancement
d99a726c46 Merge remote-tracking branch 'origin/imx_v2021.04' into lf_v2021.04
3fd0991551 MLK-25349 imx8mq_evk: Enable PCIE VREG for 3.3v PHY supply
b5f6c18daa Merge remote-tracking branch 'origin/imx_v2021.04' into lf_v2021.04
4475af9bea LFU-209 imx8ulp_evk: Enable multiple env storage devices
13f356fc98 LFU-208 imx8ulp: Update ahab doc for 8ULP secure boot
6a62a223f2 Merge remote-tracking branch 'origin/imx_v2021.04' into lf_v2021.04
ecb2513697 LFU-207 imx8ulp: clock: Reset DDR controller before clock enable
b6df87fb32 Merge remote-tracking branch 'origin/imx_v2021.04' into lf_v2021.04
612677d547 HRPN-84 imx8mm_evk: use variable instead of hardcoded dtb name in jh boot command
f54879f3eb Merge remote-tracking branch 'origin/imx_v2021.04' into lf_v2021.04
9e5e79c83b Pull request #29: LFU-192 Uboot: Add command and descriptors to provision ddek
2ad52ac95f LFU-192-6 Uboot: Add command to provision encryption key
4884bf62a7 LFU-192-5 crypto/fsl: Fix warnings in function gen_mppubk.
dc3adcc258 LFU-192-4 crypto/fsl: Add support for HW accelerated AES ECB decryption
b93255eea9 LFU-192-3 crypto/fsl: Add support to tag a black object
b218e498e8 LFU-192-2 crypto/fsl: Add support for black key blob
68652f7e6f LFU-192-1 crypto/fsl: add invalidate_dcache_range for hash output buffer
df30e6c07e Merge remote-tracking branch 'origin/imx_v2021.04' into lf_v2021.04
216aeb6408 LFU-206 imx8ulp: Workaround LPOSC_TRIM fuse load issue
1499d50249 LF-4200 imx8m: soc: drop phy-reset-gpios for fec
c95a03993f Merge remote-tracking branch 'origin/imx_v2021.04' into lf_v2021.04
892528549f Merge remote-tracking branch 'origin/imx_v2021.04' into lf_v2021.04
12c2cabf67 Pull request #33: LFU-200: board: freescale: imx8mn ab2: fix usb download support
147e681f95 LFU-200: board: freescale: imx8mn ab2: fix usb download support
4fa3480156 LFU-199: configs: imx8mn ddr4: ab2: fix correct pmic
47a081d861 Merge remote-tracking branch 'origin/ls_v2021.04' into lf_v2021.04
1ff8af0741 configs: ls2080ardb.h: Update mc size in env
2b4e1fb63f configs: ls2080aqds.h: Update mc size in env
a82c574f52 configs: ls1088ardb.h: Update mc size in env
0728f1367f configs: ls1088aqds.h: Update mc size in env
f028eba755 Merge remote-tracking branch 'origin/imx_v2021.04' into lf_v2021.04
30bbad3df5 LFU-203 imx8ulp_evk: Enable SD/MMC port auto detect
4054f98489 LFU-202 imx8ulp: Remove freescale name from CPU revision
2c44ed2a08 Merge remote-tracking branch 'origin/imx_v2021.04' into lf_v2021.04
f942ee90b3 LFU-198 imx8mq_evk: Increase malloc size to 32MB
af7fb0b6b4 LF-4182 imx8m: enable CONFIG_CMD_POWEROFF
1a738c9c1e Merge remote-tracking branch 'origin/imx_v2021.04' into lf_v2021.04
3d8455c51f Merge remote-tracking branch 'origin/imx_v2021.04' into lf_v2021.04
f626b544a6 LFU-197 imx8ulp: Fix DCNANO QoS setting
2329de6d4c LFU-196-6 imx8ulp_evk: Enable the power domain driver
4b4708590d LFU-196-5 imx8ulp_evk: Power down the domains may used in u-boot
e84571971f LFU-196-4 usb: ci_udc: Check the power domain device before power down it
581efd8784 LFU-196-3 imx8ulp_evk: Remove flexspi2 iomux settings from board file
6b53e4f9b7 LFU-196-2 DTS: Sync imx8ulp and imx8ulp-evk DTS files with kernel
87187c4e96 LFU-196-1 power: domain: Add SCMI based power domain driver
9773095b05 Merge remote-tracking branch 'origin/imx_v2021.04' into lf_v2021.04
c20ff98502 Pull request #27: MLK-20950 Run RNG self test for impacted i.MX chips.
578c36a50b MLK-20950 Run RNG self test for impacted i.MX chips.
facee24798 Merge remote-tracking branch 'origin/ls_v2021.04' into lf_v2021.04
1b787eb011 configs: ls1043aqds: Configure environment related configs
22cc7f886a net: enetc: propagate the return code from phy_startup() to eth_ops::start
62c28862ba net: enetc: force the RGMII MAC speed/duplex instead of using in-band signaling
333eecd52e net: enetc: require a PHY device when probing
80c47060cb arm: dts: ls1028a: disable enetc-2 by default
fa212dc62b arm: dts: ls1028a: declare the fixed-link speeds for the internal ENETC ports
f2f93c5c6e arm: dts: ls1028a: enable internal RGMII delays for the LS1028A-QDS AR8035 PHY
a8c4d18535 arm: dts: ls1028a: enable the switch CPU port for the LS1028A-QDS
245a0e37fa Merge remote-tracking branch 'origin/imx_v2021.04' into lf_v2021.04
493f71ffd5 LFU-195 imx8ulp: Set DCNANO read QoS on NIC_LPAV to highest
0d1a586e91 Merge remote-tracking branch 'origin/imx_v2021.04' into lf_v2021.04
7985635660 LFU-194-2 DTS: iMX8M: Replace the RM67191 panel with RM67199
2840ef1395 LFU-194-1 video: rm67191: Add new rm67199 panel support
178451775a Merging in latest from upstream (LFAC/uboot-nxp:refs/heads/imx_v2021.04)
98f3d83574 LF-3892-6 imx8mp_evk: update defconfig and code for SR-IR
f8cba1b104 LF-3892-5 imx8mn_evk: update defconfig and code for SR-IR
72e61725bf LF-3892-4 imx8mn: sync dts usb with nxp kernel
2d4219e768 LF-3892-3 imx8mp: disable snvs and sdma
5853da1a4d LF-3892-2 imx8mp_evk: enable usb power by default
5ce91d244b LF-3892-1 imx8mq_evk: support SR-IR
f0a4853640 Merge remote-tracking branch 'origin/imx_v2021.04' into lf_v2021.04
4e7135ca48 Merge remote-tracking branch 'origin/imx_v2021.04' into lf_v2021.04
66b5e4c0c2 LFU-193-5 DTS: imx8mp: Add the CMA reserved memory
2413d82b74 LFU-193-4 imx8mp_evk: Remove USB2 PWR GPIO control
2fe2bd4d55 LFU-193-3 DTS: imx8mp-evk: Sync the USB nodes with kernel
bb7c98bece LFU-193-2 usb: xhci-imx8m: Update iMX8MP XHCI driver to support new DTS node
51fd39bcc0 LFU-193-1 clk: imx8mp: Update clock tree for USB relevant clocks
7ff159f4e0 Merge remote-tracking branch 'origin/imx_v2021.04' into lf_v2021.04
f4676f6bf0 LFU-184-8 imx8ulp_evk: Enable the Splash screen
d3e84367dd LFU-184-7 imx8ulp_evk: Control LPI2C0 PCA6416 and TPM0 for display
8a16e4446b LFU-184-6 video: rm68200: Allow no backlight property
27253d0959 LFU-184-5 video: imx: Update MIPI DSI driver for iMX8ULP
d2bc3bb11e LFU-184-4 video: imx: Add DCNano display controller driver
e4a190a579 LFU-184-3 arm: DTS: Update imx8ulp for MIPI DSI and DCNANO
b7ad5bbad0 LFU-184-2 imx8ulp: clock: Add MIPI DSI clock and DCNano clock
634a2bc8c7 LFU-184-1 imx8ulp: clock: Support LPAV clocks in cgc and pcc
3504b2bcc9 MLK-25642: configs: imx8dxl_ddr3_evk: add new config for fspi nor boot
e6d89d1cd3 Merge remote-tracking branch 'origin/imx_v2021.04' into lf_v2021.04
04ced23ffa LFU-188-2 imx8mp_evk: Remove reservation for MCU RPMSG buffer
971bae76cc LFU-188-1 imx8m: soc: Relocate u-boot to the top DDR in 4GB space
1d2a230741 LFU-187 misc: imx8ulp: Update fuse driver for bank 25 access
49acceec90 LFU-186 imx8ulp_evk: Enable USB ethernet support
0cf784bea0 Merge remote-tracking branch 'origin/imx_v2021.04' into lf_v2021.04
1e4568fa41 MA-19249-2 imx8ulp: enable more configs
23454b24e6 MA-19249 imx8ulp: fix dual bootloader
45462a6aba Merge remote-tracking branch 'origin/imx_v2021.04' into lf_v2021.04
bf993cbaf2 MA-19209-3 imx8ulp: add config file to support trusty
99e3b70f57 MA-19209-2 Support trusty for imx8ulp
b37fb0306d Merge remote-tracking branch 'origin/imx_v2021.04' into lf_v2021.04
7eead82bce Pull request #26: Feature/imx v2021.04/LFU-167
74176014f8 Merge remote-tracking branch 'origin/imx_v2021.04' into lf_v2021.04
ff8fc6c391 LFU-183 configs: imx8ulp: add Jailhouse boot command
9dbb3a95ea Merge remote-tracking branch 'origin/imx_v2021.04' into lf_v2021.04
34d4c41128 LFU-182-5 imx8ulp_evk: Add secure boot environments
d75a91e5e9 LFU-182-4 imx8ulp: ahab: Update AHAB codes to support authentication
fcf98912a3 LFU-182-3 misc: S400_API: Update S400 API for buffer dump
89797a1eee LFU-182-2 misc: imx8ulp_mu: Update S400 MU driver
ff176fa31c LFU-182-1 arm: imx8ulp: Probe the S400 MU after u-boot relocation
9c14458bda LFU-167-6: dts: arm: imx8mn ab2: update for latest som revison
bf88d9f87b LFU-167-5: dts: arm: imx8mm ab2: update for latest som revison
9e8dcbb967 LFU-167-4: configs: imx8mn ab2: update config options v2021.04
789944b10b LFU-167-3: configs: imx8mn ab2: update config options v2021.04
bf20bac785 LFU-167-2: board: freescale: imx8mm ab2: spl update v2021.04
93173f62d7 LFU-167-1: arm: mach-imx: imx8m ab2 enable crypto and caam
40588c3c3d MLK-25347-12: configs: imx8mn ddr4 ab2: enable usb support
0a4a20c2d7 MLK-25347-11: configs: imx8mn ab2: enable usb and fasboot support
959116d44c MLK-25347-10: configs: imx8mm ddr4 ab2 nand: enable usb support
ef15f380ce MLK-25347-9: configs: imx8mm ddr4 ab2: enable usb and fastboot support
fe84f68525 MLK-25347-8: configs: imx8mm ab2 fspi: usb fastboot support
81fd21e0e2 MLK-25347-7: configs: imx8mm ab2: usb and fastboot support
2d3c155d0d MLK-25347-6: dts: arm: imx8mn ab2: enable usbotg1 support
88ddecff80 MLK-25347-5: dts: arm: imx8mm ab2: enable usbotg1 support
fea0ecda19 MLK-25347-4: include: configs: imx8mn ab2: enable usb configs
4fa403e521 MLK-25347-3: include: configs: imx8mm ab2: enable usb configs
4e3c799948 MLK-25347-2: board: freescale: imx8mm ab2: spl enable usb boot device
90565cab1d MLK-25347-1: board: freescale: imx8mm ab2: usb support
40ea784dd1 MLK-24868: dts: arm: imx8mn ab2 fix regulator settings
bb28778c65 MLK-24510: board: freescale: imx8mm ddr4 audio board 2.0
c0d3a4eada MLK-24509-2: configs: imx8mn ab2: cortex-m7 auxboot support
2b19d51398 MLK-24509-1: configs: imx8mm ab2: cortex-m4 auxboot support
fd040130bf MLK-24508: board: freescale: imx8mm ab2: fix regulators build warning
986bba0a00 MLK-24395: dts: arm: imx8mm ab2: add fec phy int gpio pad
236d2569b6 MLK-24394-2: board: freescale: imx8mm ab2: enable fixed regulators
1a2a89a238 MLK-24394-1: dts: arm: imx8mm ab2: fixed regulator support
18817b5f93 MLK-24393: include: configs: imx8mm ab2: m4 boot support
a3fad84b45 MLK-24392: dts: arm: imx8mm ab2: fix flexspi flash0 properties
abc7a764ed MLK-24069: dts: arm: imx8mm: ab2 fix enet phy addr
14c1a859b0 MLK-24057: configs: imx8mm ab2 increase enet phy timeout
b869581390 MLK-23928: board: freescale: imx8mn audio board 2.0
640f60e367 MLK-23927: board: freescale: imx8mm audio board 2.0
0f06048c81 Merge remote-tracking branch 'origin/imx_v2021.04' into lf_v2021.04
210f84da45 LFU-175 i.MX8ULP: Enables CAAM support for i.MX8ULP in SPL and U-Boot.
ed9753f415 Merge remote-tracking branch 'origin/ls_v2021.04' into lf_v2021.04
6c225502b2 net: dsa: felix: propagate the error code from phy_startup()
af172d2765 net: dsa: felix: call phy_config at .port_probe() time
cbdbfc2522 net: dsa: introduce a .port_probe() method in struct dsa_ops
88f89c7899 net: dsa: refactor the code to set the port MAC address into a dedicated function
cf47371ccf net: dsa: use "err" instead of "ret" in dsa_port_probe
049fa15dab net: dsa: felix: felix_init() can be static
f7501bdd5e Merge remote-tracking branch 'origin/imx_v2021.04' into lf_v2021.04
3678f2437e MLK-25623 imx8ulp: upower_hal: fix upower_wait_resp
ee4c696409 MA-19209 imx8ulp: reserve tee memory
1dbd8c2a45 MLK-25612 arm: imx: Fix container header checking
d14581d3fc MLK-25575 imx8ulp: soc: enable wdog_ad interrupt in CMC1
9c6448eeb7 MLK-25609 arm: imx8ulp: force use general regs
eeeffaff4b MLK-25608-2 imx8ulp: clear ddr retention
fe102369c8 MLK-25608-1 imx8ulp: upower: include API to support set/clear ddr retention
92af5c7a61 MLK-25576 imx8ulp: soc: correct reset cause
afef2b7c86 MLK-25614: dts: imx8ulp: fix uboot usdhc2 dts node mismatch with kernel dts
eb375abd0d MA-19091-1 dts: imx8ulp: Add console bootargs
29407a880b LFOPTEE-48 imx8ulp: release CAAM for the Cortex-A35
65d87ea812 LFOPTEE-48 imx8ulp: enabled OPTEE DTB node
b42e95713d MLK-25589: dts: imx8ulp-evk: disable usdhc2 which is used by wifi in uboot
2e42aa804c MLK-25586 imx8ulp_evk: Set PMIC Buck3 to 1.1v
20dee6f6a0 MA-19091 android: add android support for 8ulp
72bfc8f166 MA-19118 imx8ulp: support mmc boot in spl
103b94d346 MLK-25560-7 imx8ulp_evk: Enable the flexspi0 NOR support
4a97a49990 MLK-25560-6 arm: dts: Add the flexspi0 node to imx8ulp DTSi
f0ec8cc65e MLK-25560-5 imx8ulp: Use DGO_GP5 to get boot config
55456b7bcc MLK-25560-4 imx8ulp: rdc: Add TRDC interface to configure MRC
832fe03097 MLK-25560-3 imx8ulp: Update pins header file for flexspi0
2dbc37340a MLK-25560-2 imx8ulp: Update MMU table for flexspi0 access
514b0c5aad MLK-25560-1 mtd: spi: Add Adesto ATXP032 SPI NOR flash support
a56bd8ab60 MLK-25552 imx8ulp: assign PXP/HIFI4/EPDC to APD domain
3c695cf2ce MLK-25536-2 imx8ulp_evk: Update LPDDR4 timing file
1d28ee7c79 MLK-25536-1 imx8ulp: clock: Update PLL4 and DDR clock
807c0e2aa7 MLK-25504-43 imx8ulp: soc: Check the DBD_EN fuse before setting RDC
829e193dfb MLK-25504-42 imx8ulp: Add workaround for eMMC boot
79f3c7fc8c MLK-25504-41 arm: imx: add i.MX8ULP EVK support
d661020e5c MLK-25504-40 imx8ulp: rdc: Add functions to init MDA and MRC
110ac95d93 MLK-25504-39 arm: dts: add i.MX8ULP dtsi
157ed3d5ff MLK-25504-38 arm: imx8ulp: Add upower APIs
4cd13b3bbb MLK-25504-37 ddr: Add DDR driver for iMX8ULP
e85dab751d MLK-25504-36 arm: iMX8ULP: Add boot device relevant functions
64238d765b MLK-25504-35 arm: imx8ulp: add xrdc support
8f72b77d8b MLK-25504-34 spl: spl_imx_romapi: Fix gd recover issue
627905e2ee MLK-25504-33 mtd: spi-nor: Add new MACRONIX NOR flash ID
e16f5da704 MLK-25504-32 fastboot: Add iMX8ULP support for partition offset
65c785802e MLK-25504-31 usb: ci_udc: Update USB gadget driver for iMX8ULP
db40a9d563 MLK-25504-30 mx7ulp: clock: Update USB PLL clock function
452c1c105a MLK-25504-29 usb: ehci-imx6: Update USB host driver for iMX8ULP
6f97e6b7d4 MLK-25504-28 driver: misc: imx8ulp: Add fuse driver for imx8ulp
1165f036d0 MLK-25504-27 arm: imx8ulp: add iomuxc support
43b4326384 MLK-25504-26 arm: imx8ulp: add dummy imx_get_mac_from_fuse
a56159a944 MLK-25504-25 arm: imx8ulp: Probe the S400 MU device in arch init
b2c4a09b9b MLK-25504-24 arm: imx8ulp: Allocate LPAV resources to AP domain
9194f206e8 MLK-25504-23 arm: imx8ulp: Release and configure TRDC for single boot
483fbeddc3 MLK-25504-22 arm: imx8ulp: release and configure XRDC at early phase
423c6933ba MLK-25504-21 imx: AHAB: Update AHAB for iMX8 and iMX8ULP
49b7c3095c MLK-25504-20 spi: nxp_fspi: Update flexspi NOR driver for iMX8ULP
409ef8652f MLK-25504-19 spi: fsl_fspi_nand: Update flexspi nand driver for imx8ulp
ba7f875afc MLK-25504-18 mtd: nand-spi: Add micron chip MT29F4G01
f48d411154 MLK-25504-17 ulp_wdog: Update the watchdog driver
1822b965d6 MLK-25504-16 arm: imx8ulp: Update the reset vector in u-boot
0db15a45bf MLK-25504-15 arm: imx8ulp: disable wdog3
98fc0727c8 MLK-25504-14 arm: imx8ulp: Enable full L2 cache in SPL
b3fd68bb1b MLK-25504-13 arm: imx8ulp: add clock support
2c23e7c4f0 MLK-25504-12 mmc: fsl_esdhc_imx: support i.MX8ULP
21fbd3e544 MLK-25504-11 serial: fsl_lpuart: support i.MX8ULP
5cb9388310 MLK-25504-10 pinctrl: Add pinctrl driver for imx8ulp
f89c3d1fb8 MLK-25504-9 net: fec_mxc: support i.MX8ULP
4966e91c7c MLK-25504-8 misc: Add MU and S400 API to communicate with Sentinel
1f26092892 MLK-25504-7 imx: Support loading container image from RAM device
6e3f58bcba MLK-25504-6 imx: Support container image in ROM API download
54e2702651 MLK-25504-5 imx8: Move container image header file to mach-imx
62d0f9806c MLK-25504-4 arm: imx: move container Kconfig under mach-imx
36762aa9d5 MLK-25504-3 arm: imx8: Move container parser and image to mach-imx common folder
af1258e4af MLK-25504-2 arm: imx: add i.MX8ULP basic support
f15e54b858 MLK-25504-1 arm: imx: sys_proto: move boot mode define to common header
48c2eeff75 MA-19231 Remove deprecated do_boota()
a4a0b8ba78 Merge remote-tracking branch 'origin/ls_v2021.04' into lf_v2021.04
c434a99216 net: phy: inphi: change dev_err to pr_err
800e17e7b8 board: freescale: lx2160aqds: include the lx2160a.h header
777fcdd078 board: lx2160aqds: add support for SERDES #1 protocol 14
c789aaadc6 board: lx2160aqds: add support for SERDES #1 protocol 13
f923ded1f3 net: ldpaa_eth: connect to multiple PHYs/retimers
b87e5508f7 dm: mdio: add dm_eth_phy_connect_index()
3ee4ed7462 Merge remote-tracking branch 'origin/ls_v2021.04' into lf_v2021.04
ad0ae45a87 configs: ls1046ardb: enable PHY_FIXED
3a1c1143d2 arm: dts: ls1043ardb: configure the RGMII ports with rgmii-id
02f4ac66ad armv8: fsl: fix bootcmd and mcinitcmd default value
617320f3b2 Merge remote-tracking branch 'origin/imx_v2021.04' into lf_v2021.04
f7488084bb MA-19176 imx8mm: enlarge early malloc pool size
363f43808b Merge remote-tracking branch 'origin/ls_v2021.04' into lf_v2021.04
35b7ddacff board: freescale: t208xrdb: add a config option for rev D dts fixups
7c9972b14b board: freescale: t208xrdb: add Linux fdt fix-ups for rev D
f650a4e4c6 board: freescale: t208xrdb: detect the board revision version
1fcfd5f3b5 board: freescale: t208xrdb: remove the legacy non-DM_ETH code
----
Signed-off-by: Tom Hochstein <tom.hochstein@nxp.com>
|
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
Includes update to patch 0001-mkimage_fit_atf-fix-fit-generator-node-naming.patch
which is partially applied by 1527fb9.
Fixes in update:
---
7a277c8 LF-4794 iMX8ULP: move OPTEE OS base address to 0xa6000000
9a04474 Update iMX8DXL clean target to remove intermediate files
dfe6265 Fix build warning
c78d727 Fix iMX8DXL ahab container image extraction
9bd94cc LF-4522 Parse and extract the u-boot-atf container
6cf67ed iMX8QM/QX/DXL/ULP: Add core id to -data option
1527fb9 iMX8M: fix FIT DT node unit address
cbf03b6 Fix issue with C0 versus B0 nightly pull for VAL.
7f98709 iMX8M: soc: fix support to override u-boot DTB file name
c9cce4f iMX8ULP: support xip for m33 and add README
----
Signed-off-by: Tom Hochstein <tom.hochstein@nxp.com>
|
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
5782363f9 Merge remote-tracking branch 'origin/ls_v2.4' into lf_v2.4
7da12d7b1 Merge remote-tracking branch 'origin/imx_v2.4' into lf_v2.4
7db434609 LF-4794 plat: imx8ulp: move OPTEE OS base address to 0xa6000000
0767d16d7 caam: refine code to avoid hang issue for some of toolchain
80f871a4c Merge remote-tracking branch 'origin/imx_v2.4' into lf_v2.4
0a0a737d5 LF-4872 plat: imx8ulp: enable -fno-strict-aliasing
b047a7949 Merge remote-tracking branch 'origin/ls_v2.4' into lf_v2.4
aeb0eb34d Pull request #40: LF-4660: fix erratum A-009810
a25562ecb Merge remote-tracking branch 'origin/ls_v2.4' into lf_v2.4
e5562d954 plat: ls1088a ls2088a: fix erratum A-009810
d72f464c2 nxp: soc-lx2160: drop erratum A-009810
68a45ce8c plat/nxp/ls1043a: remove confused header file
228c9787f LF-4810 plat: imx8ulp: Fix the tpm5 register restore
b185cbae5 Merge remote-tracking branch 'origin/imx_v2.4' into lf_v2.4
2ca00f66a LF-4801 plat: imx8ulp: Enable AFBB by default for APD side active mode
2d8ad1477 Merge remote-tracking branch 'origin/imx_v2.4' into lf_v2.4
617b3ad72 Merge remote-tracking branch 'origin/imx_v2.4' into lf_v2.4
824f660d6 LF-4723-03 plat: imx8ulp: Add system power off support
37f2cbb7c LF-4723-02 plat: imx8ulp: Add APD power down mode(PD) support in system suspend
01901e590 LF-4723-01 plat: imx: Enable 512KB cache after resume on imx8ulp
635780cbb plat: imx8ulp: upower: Fix build by initializing srvgrp and function
a05aa7bc7 plat: imx8ulp: upower: Fix build by initializing srvgrp and function
14a860c13 LF-4715-4 imx8ulp: add scmi_sensor support
e364ecb82 LF-4715-3 imx8ulp: upower: add read temperature hal function
a0e14034a LF-4715-2 imx8ulp: update upower api
504d8b91b LF-4715-1 drivers: scmi-msg: add sensor support
a69b7763f Merge remote-tracking branch 'origin/imx_v2.4' into lf_v2.4
f71a2041f Merge remote-tracking branch 'origin/imx_v2.4' into lf_v2.4
2e36dd9be plat: imx8ulp: upower: Fix build by initializing srvgrp and function
ded2cd343 LF-4593 plat: imx8ulp: Set cpu reset vector base to rom entry
2f4fa6908 Merge remote-tracking branch 'origin/imx_v2.4' into lf_v2.4
3dcf2c050 Merge remote-tracking branch 'origin/imx_v2.4' into lf_v2.4
a80529a5d LF-4615 plat: imx: Update the license for upower api
Signed-off-by: Tom Hochstein <tom.hochstein@nxp.com>
|
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
The HDMI firmware is expected to be loaded by firmwared, but it is not
found in the rootfs as shown in systemctl status firmwared:
```
Mar 24 10:25:21 imx8qmmek firmwared[571]: firmware 'hdmitxfw.bin' not found
Mar 24 10:25:21 imx8qmmek firmwared[571]: cancel firmware load hdmitxfw.bin
```
Move the firmware from the sub-folder /lib/firmware/imx/hdmi to the
standard location /lib/firmware.
Signed-off-by: Tom Hochstein <tom.hochstein@nxp.com>
|
| |
| |
| |
| |
| |
| |
| | |
New firmware binaries are available from NXP as a part of 5.10.72-2.2.0
release.
Signed-off-by: Tom Hochstein <tom.hochstein@nxp.com>
|
|/
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
U-Boot fork has been updated to include new version v2022.01 from
upstream.
Following commits were ported from 2021.07+fslc revision:
----
e2b8a409f3 imx: iMX6: Define disconnect_from_pc function
708efb65a3 MLK-21854-2 imx: uuu: Update autoboot to run uuu or fastboot
c51871146b pico-imx6ul, pico-imx7d: Explain how to use eMMC user partition
9033bca081 mx6sabre_common: Dynamically change the video output
4b3275b77f mx6sabresd: Enable video interfaces in bootargs
----
Following new commits are added to this revision:
----
18bb53aebf imx8mn-ddr4-evk: generate single bootable image
125754edb5 imx8mq_evk: configs: add/cleanup variables for distro boot
----
Update U-Boot recipe versions and point to new revision.
Signed-off-by: Andrey Zhizhikin <andrey.z@gmail.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This is a port of commit 5013182 ("trusted-firmware-a: enable clang
support") from meta-arm [1]:
The CC and LD parameters are used to point make to the currently
used compiler and linkers.
This change enables TFA to be compiled successfully when
TOOLCHAIN=clang.
Signed-off-by: Andrey Zhizhikin <andrey.z@gmail.com>
Link: [1]: https://github.com/jonmason/meta-arm/commit/5013182ddaf7fabc3cc87ba6c923abb7f68214f5
|
|
|
|
|
|
|
|
|
|
|
| |
This is a port of commit de5d5e6 ("arm/trusted-firmware-a: no need to
DEPENDS on a C runtime") from meta-arm [1].
TF-A is a baremetal application and do not need to DEPENDS on a C
runtime.
Signed-off-by: Andrey Zhizhikin <andrey.z@gmail.com>
Link: [1]: https://github.com/jonmason/meta-arm/commit/de5d5e611a81dd7934ef8343b84948fbeffc333b
|