| Commit message (Collapse) | Author | Age | Files | Lines |
|
|
|
|
|
|
|
|
|
| |
MACHINEs such as the imx23evk and imx28evk (i.e. the mxs MACHINEs)
failed to build because the recipe for u-boot-fslc-mxsboot-native wasn't
instrumented to support ${B} != ${S}, which is used as a result of inheriting
u-boot-fslc-common. In other words, the inherit was setting up ${B} != ${S},
but then u-boot-fslc-mxsboot didn't know what to do in this scenario.
Signed-off-by: Trevor Woerner <twoerner@gmail.com>
|
|
|
|
|
|
|
|
| |
Currently imx6qdlsabreauto is configured to generate an lzop-compressed u-boot
fit image, therefore a lzop-native is required on the host. Add this
dependency generically since more MACHINEs might switch over in time.
Signed-off-by: Trevor Woerner <twoerner@gmail.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
In upstream openembedded-core, the definition for the B variable moved from
u-boot.inc to u-boot-common.inc. None of the recipes in this layer use
upstream's u-boot-common.inc, so add the B to the *common* include files here
so u-boot continues to build. See:
http://cgit.openembedded.org/openembedded-core/commit/meta/recipes-bsp/u-boot?h=master-next&id=26023b6b0f897842fd98b3e10a8acd5b3ad8f418
This was build-tested with all the imx and ls* lx* MACHINES:
$ MACHINE=<machine> bitbake virtual/bootloader -c compile
Signed-off-by: Trevor Woerner <twoerner@gmail.com>
|
|
|
|
|
|
| |
Along with a recent kernel, use a reasonable up to date u-boot.
Signed-off-by: Jens Rehsack <sno@NetBSD.org>
|
|
|
|
| |
Signed-off-by: Chunrong Guo <chunrong.guo@nxp.com>
|
|
|
|
| |
Signed-off-by: Mihai Lindner <mihai.lindner@nxp.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
*update to lsdk 1909 tag
include the following changes:
ce862bb - armv8: ls1028a: change edma streamid to match hw limitation
78dd86b - nxp: fix NXP copyright
b7e343f - board/freescale/ls1028a: Secure boot: Call sec_init function.
c980cf8 - armv8: ls1028a: disable multimedia feature when not supported
39933ff - configs: ls1012afrwy: Add CONFIG_ENV_ADDR for LS1012AFRWY
1478e20 - armv7: ls102xa: Don't power down OCRAM1 during deep sleep
a087b9f - armv7: ls102xa: add errata ID A-008646 for workaround
0ec50d4 - armv8: fsl-layerscape: Make USB masters snoopable
9fd0f88 - drivers: net: phy: aquantia: configure proto for speeds supported by FW
bceb6d8 - configs: ls1012ardb: Add CONFIG_ENV_ADDR for LS1012ARDB
e0cf981 - armv8: ls1028a: add more personalities support
3d43deb - configs: enable eSDHC device module for T4240RDB board
6179188 - configs: enable eSDHC device module for T2080RDB board
e138268 - configs: enable eSDHC device module for T1042D4RDB board
186731e - configs: enable eSDHC device module for T1024RDB board
a9c7781 - configs: enable eSDHC device module for P5040DS board
e5ee0fd - configs: enable eSDHC device module for P4080DS board
dcda78a - configs: enable eSDHC device module for P3041DS board
d6818e8 - configs: enable eSDHC device module for P2041RDB board
f6aac0b - configs: enable eSDHC device module for P2020RDB board
5becf1c - configs: enable eSDHC device module for P1020RDB board
8d6bfeb - board: sdhc: Use block layer to read from mmc
86e7252 - arch: powerpc: add eSDHC node to t4240 dts
7fac3bb - arch: powerpc: add eSDHC node to t104x dts
9b2f786 - arch: powerpc: add eSDHC node to t102x dts
bf242e5 - arch: powerpc: add eSDHC node to p5040 dts
234f871 - arch: powerpc: add eSDHC node to p4080 dts
f6838de - arch: powerpc: add eSDHC node to p3041 dts
8a5f11a - arch: powerpc: add eSDHC node to p2041 dts
e5b9415 - arch: powerpc: add eSDHC node to p2020 dts
c2c95a9 - arch: powerpc: add eSDHC node to p1020 dts
Signed-off-by: Chunrong Guo <chunrong.guo@nxp.com>
|
| |
|
|
|
|
|
|
|
|
| |
This commit includes the following change:
ca0ab15271 pico-imx7d: Sync all defconfigs with pico-imx7d_defconfig
Signed-off-by: Fabio Berton <fabio.berton@ossystems.com.br>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
*update to lsdk 1906 tag
include the following changes:
c873063 - common: qixis: make the qixis compatible with new soc
4fe7bca - armv8: ls1028a: Add environment variables to facilitate the boot
d7baae8 - dm: i2c: lx2160: Revert lx2160 i2c dm support patch set
3c75182 - armv8: lx2160ardb : Add slave nodes under the i2c0 controller
1807bb1 - armv8: lx2160ardb : Add pcf2127 node
600e32c - armv8: dts: fsl-lx2160a: add i2c controller and gpio DT nodes
efe84a3 - gpio: do not include <asm/arch/gpio.h> on ARCH_LX2160A
8fbdb38 - drivers: i2c: mxc: Solve the compiler error when using i2c dm mode
210c880 - configs: lx2160a: enable DM support for pcf2127 rtc
4691972 - armv8: lx2160a: The lx2160a platform supports the I2C driver model.
9b6da05 - board/freescale/common: secure_boot: Set bootdelay to -2.
c419c9c - armv8: fsl-layerscape: Increase mmc read size for secure-boot headers
e3a324e - configs: fsl-layerscape: secure_boot: Enable setexpr command.
03313e4 - armv8: dts: ls1028a: Add FSPI node for ls1028ardb and ls1028aqds
47a485c - configs: ls1028a: Enable FSPI support for ls1028ardb and ls1028aqds
7a5853e - mtd: spi-nor-ids: Add micron mt35xu02g flash ID
d5cf4da - configs: ls1012: unset CONFIG_SPI_FLASH_BAR, move CONFIG_FSL_QSPI to defconfig
bcdf1cb - driver: spi: Update QSPI driver xfer
0c337c2 - armv8: ls2088ardb: Fix MC firmware loading during SD boot
336202e - armv8: ls2088aqds: Fix MC firmware loading during SD boot
7be353f - armv8: ls2088aqds: Add bootcmd for TFA boot
9664bf5 - armv8: fsl-layerscape: Change bootcmd update logic
3bad029 - ls1046ardb: Add CONFIG_ENV_ADDR to init env in qspi boot
b892a5c - armv8: fsl-lsch2: add clock support for the second eSDHC
6bec285 - configs: ls1088aqds: Enable config to write aligned data to TxFIFO
7db76c5 - arm64: configs: ls1046afrwy: config update
268ebc5 - armv8: fsl-layerscape: Update qspi clk cfg
da7f6ec - armv8/fsl-layerscape: Add loop to check L3 dcache status
55007f3 - ARM: dts: ls1021a: Fixed reg for sata node
*Upgrade version to 2019.04
Signed-off-by: Chunrong Guo <chunrong.guo@nxp.com>
|
|
|
|
|
|
|
|
| |
This commit merges tag v2019.07 and add the following change on top:
- 86ce1a1351 pico-imx7d: Define BOOTMENU_ENV
Signed-off-by: Fabio Berton <fabio.berton@ossystems.com.br>
|
|
|
|
|
|
|
|
| |
This upgrades to the next U-Boot release 2019-07. This is based on the
2019.07-rc4 and includes the last fixes being worked on for the i.MX
family.
Signed-off-by: Fabio Berton <fabio.berton@ossystems.com.br>
|
|
|
|
|
|
|
|
|
|
|
| |
The build of the fw-utils is broken for all the machines that switched
to TFA as u-boot 2018.03 doesn't have the TFA configs. Upgrade to
2018.09 to fix this issue and have both u-boot and the fw-utils built
from the same version, which is probably a good idea anyway.
Also added the dependency on bison-native which is needed for the build.
Signed-off-by: Alban Bedel <alban.bedel@avionic-design.de>
|
|
|
|
|
|
| |
Add the MACHINE and UBOOT_CONFIG to the binary name.
Signed-off-by: Tom Hochstein <tom.hochstein@nxp.com>
|
|
|
|
|
|
|
|
| |
Upgrade version to 2018.03 from branch imx_v2018.03_4.14.98_2.0.0_ga.
Drop usage of dtc-145 binary, pulled by the class with the same name,
which was a workaround for older u-boot versions.
Signed-off-by: Mihai Lindner <mihai.lindner@nxp.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This commit includes the following changes:
- c93ced78dbc pico-imx7d: Add NYMPH baseboard support
- 790e0d17c2a pico-imx7d: Add DWARF baseboard support
- bab9f53c898 pico-imx6ul: Add NYMPH baseboard support
- 246d037843d Merge tag 'v2019.04' into 2019.04+fslc
- 3c99166441b (tag: v2019.04) Prepare v2019.04
- 85c3d463224 arm: sunxi: Enable DM_MMC on required SoCs
- c48b07a9fde Merge tag 'fixes-for-2019.04-rc4' of git://git.denx.de/u-boot-staging
- e82fa10b3ef dts: imx8qxp-mek: Add PHY post reset delay
- 31d4045d4be net: dm: fec: Support phy-reset-post-delay property
- ccd063e9812 watchdog: Move watchdog_dev to data section (BSS may not be cleared)
- afbc31948a0 net: phy: implement fallback mechanism for negative phy adresses
- a734600ee9e pico-imx6ul: Add DWARF baseboard support
- bcc90648ddb Merge remote-tracking branch 'origin/master' into 2019.04+fslc
- 0e62d5b2abb Merge tag 'u-boot-imx-20190405' of git://git.denx.de/u-boot-imx
- 7f9ebbd90aa pico-imx6ul, pico-imx7d: Explain how to use eMMC user partition
- 0e708abcbba Merge branch 'master' of git://git.denx.de/u-boot-usb
- 05fa129a40e Merge branch '2019-04-03-master-imports'
- d7edeba79b2 tools/Makefile: build host tools with -std=gnu99
- ab8fc413028 fix compile error on macOS Mojave
- 2118a272e3c configs: khadas_vim2: Fix defconfig
- 82548aaad57 phy: Also allow MESON_GXM for MESON_GXL_USB_PHY
- 2a766db11a7 doc: Fix outdated ohci board hook documentation
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
*update to lsdk 1903 tag
include the following changes
80b2d2b - include: configs: lx2160a: update copyright info
7d323d4 - board: fsl: ls2080rdb: update copyright info
ff35e0c - board: fsl: ls2080aqds: update copyright info
77020d0 - board: fsl: ls1088ardb: update copyright info
6d77068 - board: fsl: ls1088aqds: update copyright info
0c48371 - armv8: fsl-layerscape: update copyright info
6f50f71 - driver: net: phy: update copyright info
ab528e9 - driver: net: ldpaa_eth: update copyright info
17c8520 - env: Update env_addr for mmc environment driver
72eb5d3 - MC : Report extra reserved memory to Linux
4f25ac0 - board/fsl/lx2160a: Fix MC firmware loading during SD boot
a4b3dc5 - armv8: fsl-layerscape: Set env_loc to ENVL_NOWHERE with CONFIG_ENV_IS_NOWHERE.
b572cfe - configs: ls1046: Update mtd-id for QSPI nor in mtdparts variable
e46941d - armv7: ls102xa: Add workaround for DDR erratum A-008850
a25b491 - board: fsl: lx2160aqds: modify the phy fixup code
100b48f - driver: net: fsl-mc: Fix DPC MAC address fixup
822c996 - drivers: net: ls1088ardb: Fix EC1 and EC2 RCW offset
bd037a4 - board/freescale: Enable DHCP distro boot for Layerscape board
705049e - Revert "Revert "pci: layerscape: Add the dts fixup for EP and RC""
d83e59c - mc : Add support to run MC in 128 MB DDR size
ec8543d - QSFP+ eeprom read support in U-boot
d163325 - pci: pcie_lx: Add the dts fixup for EP and RC
cb3f278 - armv8: cache: Flush L3 cache after relocation
6b7ff12 - net:phy:aquantia Set only autoneg on in register 4.c441
bc6f526 - armv8: lx2160aqds : Add support for LX2160AQDS platform
54d0cd6 - drivers: net: ldpaa_eth: check if the dpmac is enabled
3011d18 - armv8: fsl-layerscape: reorder rgmii dpmacs' enablement
6546319 - net: phy: Add clause 45 identifier to phy_device
1822aff - miiphy: Add function to retrieve MDIO bus list head
42b8ff2 - ldpaa_eth.c: Fix warning when PHYLIB is not enabled
16c470c - driver: net: fsl-mc: Add support of multiple phys for dpmac
Signed-off-by: Chunrong Guo <chunrong.guo@nxp.com>
|
|
|
|
|
|
|
| |
- Add bc-native dependency
- This commit merges remote-tracking branch 'imx/master' into 2019.04+fslc
Signed-off-by: Fabio Berton <fabio.berton@ossystems.com.br>
|
|
|
|
|
|
|
|
|
| |
This upgrades to the upcoming 2019.04 release. This is based on the
2019.04-rc4 and includes the last fixes being worked on for the i.MX
family thus being a good version to begin to be tested as we aim to
use it for April release.
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
|
|
|
|
| |
U-Boot build depends on bison native.
Signed-off-by: Fabio Berton <fabio.berton@ossystems.com.br>
|
|\
| |
| | |
u-boot-imx: Fix filename at install
|
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
Fix the error:
er/build/tmp/work/imx8mqevk-fslc-linux/imx-boot/0.2-r0/git/iMX8M
| cp: cannot stat '/media/daiane/TRIFORCE/yocto/master/build/tmp/deploy/images/imx8mqevk/imx-boot-tools/u-boot-nodtb.bin': No such file or directory
| WARNING: exit code 1 from a shell command.
| ERROR: Function failed: do_compile (log file is located at /media/daiane/TRIFORCE/yocto/master/build/tmp/work/imx8mqevk-fslc-linux/imx-boot/0.2-r0/temp/log.do_compile.27338)
Signed-off-by: Daiane Angolini <daiane.angolini@nxp.com>
|
|/
|
|
|
|
|
|
|
|
|
|
|
|
| |
getVar() has been defaulting to expanding by default for
a long time (2016), thus remove the True option from
getVar() calls with a regex search and replace.
Search & replace made using the following command:
sed -e 's|\(d\.getVar \?\)( \?\([^,()]*\), \?True)|\1(\2)|g' \
-i $(git grep -E 'getVar ?\( ?([^,()]*), ?True\)' \
| cut -d':' -f1 \
| sort -u)
Signed-off-by: André Draszik <andre.draszik@jci.com>
|
|
|
|
|
|
|
| |
*fix the below error
|powerpc-fslmllib32-linux-ld: cannot find -lgcc
Signed-off-by: Chunrong Guo <chunrong.guo@nxp.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
*update to lsdk 1812 tag
include the following changes
c08de7c - SecureBoot_LX2160A: Correct the kernel header offset.
619d0d3 - ls2080ardb: check enablement of QSPI using DCFG_RCWSR15
0dfcc1f - ls1088a: Update the device tree for IFC/QSPI
8875034 - net/phy: Cortina CS4223 driver updates & bugfixes
88fa585 - mmc: fsl_esdhc: make get_cd work well in dm_mmc_ops
2211378 - Revert "pci: layerscape: Add the dts fixup for EP and RC"
f8358cf - armv8: fsl-layerscape: properly configure qdma ICID
f24e259 - lx2160: Enable support of EMC2305
1a858e3 - armv8: emc2305: add support for fan controller
f37025a - fsl-ls2088ardb: dts: enabling SATA node
ff3e128 - board/ls1046aqds: Bypass xfi port fixup for KR mode on LS1046AQDS
2c3c67e - armv8: ls2088ardb: change default device tree in defconfig for TFABOOT
7f79b25 - armv8: ls1088aqds: add support for ifc-nor boot for TFABOOT
c1b55a8 - detect ifc-nor flash at run-time
6c99ca4 - pci: layerscape: Add the dts fixup for EP and RC
ccfc35d - pci: layerscape: Do not scan when PEX work in EP mode
dd167bc - pci: layerscape: Modify the EP and RC mode judge method
26defec - armv8,lx2160a: Initialize ethernet array in serdes_init
2851185 - armv8: lx2160a: Update CONFIG_SYS_FSL_PEBUF_BASE
cce8348 - board/ls2088ardb: Update the device tree for IFC/QSPI
830ac80 - Correct QSPI bootcommand for LS2088 TFA boot
899e696 - ls2088ardb: add QSPI support for TFA-BOOT
a9fb32b - ls1043a: add support for nand-boot cmd for TFA
c2b3374 - arm64: lx2160ardb: enable DM support for sata
0f80b76 - armv8: dts: fsl-lx2160a: add sata node support
a10b3fc - board/lx2160a: Update xspi_bootcmd, sd_bootcmd env
ee09465 - armv8:LX2160: Adds distro secure boot support.
9a7d1e0 - drivers/spi: Disable hybrid mode for SPANSION S25FS-S family
6b04587 - drivers/spi: Introduce functions to read/write any register
a748abd - fsl_qspi: Modify handling of RDAR, WRAR, 4K_ERASE commands
2af4cbd - armv8: lx2160a: Modify dspi1 controller intrrupts property
612bc35 - Enable sata configs to Kconfig for all LayerScape boards
358229b - armv8: ls1043aqds: modify the qspi_bootcmd definition
Signed-off-by: Chunrong Guo <chunrong.guo@nxp.com>
|
|
|
|
| |
Signed-off-by: Tom Hochstein <tom.hochstein@nxp.com>
|
|
|
|
|
|
|
|
| |
This includes following fixes:
6e25ce6f3c pico-imx7d: Increase the CONFIG_ENV_OFFSET size
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
|
|
|
|
|
|
|
| |
The latest updates observed that the target recipe is building for qemu
machines as well, which is not useful. see
http://errors.yoctoproject.org/Errors/Details/202502/
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This upgrade our fork to the current stable release. It got most of
our patches merged and now it has a very small set which are basically
Yocto Project specific stuff.
Still applied patches are:
1f39b911b7 mx25pdk: Change root to use a single partition layout
a0f8bec9d3 mx6sabre_common: Dynamically change the video output
7847536319 mx6sabresd: Enable video interfaces in bootargs
994d8e0733 mx6sabresd: Use LDO dtb file until LDO bypass support is added
c6c87fb39b mx6slevk: Use LDO dtb file until LDO bypass support is added
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
|
|
|
|
|
| |
Initial support for fw utils for qoriq
Signed-off-by: Joris Offouga <offougajoris@gmail.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
|
|
|
|
|
|
| |
Use a common file to make easier update, maintain and create
others U-Boot recipes like U-Boot fw-utils.
Signed-off-by: Joris Offouga <offougajoris@gmail.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The u-boot-fslc does not amend other machines and then cannot be seen
as something that poison other BSP. Adding the restriction to the
common file makes all native tools incompatible.
Fixes:
,----
| [imx23evk] ERROR: Nothing PROVIDES 'u-boot-mxsboot-native'
| [imx23evk] u-boot-fslc-mxsboot-native PROVIDES u-boot-mxsboot-native
| but was skipped: incompatible with machine imx23evk (not in
| COMPATIBLE_MACHINE)
`----
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
|
|
|
| |
Signed-off-by: Yuqing Zhu <carol.zhu@nxp.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
*update to lsdk 1809 tag
include the following changes:
1e96fd8 - ls2080ardb: remove dhcp function from u-boot env as boot source
5c03a79 - ls1088a: remove dhcp function from u-boot env as boot source
6f5dc2c - ls1012a: remove debug info from u-boot log.
fa2d088 - ls1088ardb_pb: Secure boot: Change bootscript and header name
13bedc9 - driver: net: fsl-mc: Memset MC reserve ram memory before usage
165c98a - Revert "driver: net: fsl-mc: Memset MC reserve red memory before usage"
e0a7cda - Revert "armv8: fsl-layerscape: add missing register blocks base address defines"
cb9edfa - Revert "armv8: ls1046a: advertise QMan v3 in configuration"
19528d0 - Revert "misc: fsl_portals: setup QMAN_BAR{E} also on ARM platforms"
e3b589b - Revert "armv8: fsl-layerscape: add missing debug stream ID"
342682e - Revert "armv8: ls1046a: initial icid setup support"
0a725a4 - Revert "armv8: ls1046a: add icid setup for qman portals"
2f59bf6 - Revert "armv8: ls1046a: setup fman ports ICIDs and device tree"
5c872b4 - Revert "armv8: ls1046a: setup SEC ICIDs and fix up device tree"
9f304d2 - Revert "armv8: ls1043a: advertise QMan v3 in configuration"
4648116 - Revert "armv8: ls1043a: add icid setup support"
6624809 - Revert "armv8: icid: fix 'set_icids' call"
52b9297 - ls1088ardb_pb: Add SD boot support.
ad074ad - driver: net: fsl-mc: Memset MC reserve red memory before usage
5c50f5a - armv8: layerscape: fix compilation warning 'unused ns_dev'
a654fcc - ls1012afrwy: Add ls1012afrwy revC board support.
69a7e63 - armv7: ls102xa: Disable QE before enter deep sleep
db1990f - arm: layerscape: Remove CONFIG_U_QE define in ls1012atwr.h
e1f8fe0 - qe: kconfig: U QE kconfig
6584582 - ls1088ardb_pb: remove sd u-boot support.
960ae1e - armv8: icid: fix 'set_icids' call
7402171 - ls1088ardb_pb: Add support for ls1088ardb_pb board.
dd5ae4b - armv8: ls1043a: add icid setup support
e9b0593 - armv8: ls1043a: advertise QMan v3 in configuration
4c762cf - armv8: ls1046a: setup SEC ICIDs and fix up device tree
1719ffd - armv8: ls1046a: setup fman ports ICIDs and device tree
82327f1 - armv8: ls1046a: add icid setup for qman portals
dbcacdc - armv8: ls1046a: initial icid setup support
1b86306 - armv8: fsl-layerscape: add missing debug stream ID
6b1519e - misc: fsl_portals: setup QMAN_BAR{E} also on ARM platforms
64e4333 - armv8: ls1046a: advertise QMan v3 in configuration
c986803 - armv8: fsl-layerscape: add missing register blocks base address defines
Signed-off-by: Chunrong Guo <chunrong.guo@nxp.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
|
|
|
|
|
|
|
|
|
| |
This helps in using meta-freescale with other BSP layers in same
projects, which is common usecase
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Cc: Andreas Müller <schnitzeltony@gmail.com>
Cc: Zhenhua Luo <zhenhua.luo@nxp.com>
Cc: Otavio Salvador <otavio@ossystems.com.br>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
|
|
|
|
|
|
|
|
|
| |
Fixes:
| bison -oscripts/kconfig/zconf.tab.c -t -l scripts/kconfig/zconf.y
| /bin/sh: bison: command not found
| make[1]: *** [scripts/Makefile.lib:228: scripts/kconfig/zconf.tab.c]
| Error 127
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This updates the fork to current 2018.09 release and apply following
changes on top:
62f2841dc4 pico-imx6ul: Add instructions for booting in Falcon mode
a803c01c03 pico-imx6ul: Add Falcon mode support
3e5f58a2a4 wandboard: README: Include the mx6qp variant in the list
28b8458749 imx: imx6ull: fix pinmux input_val for uart5 rx pin
1bc802f9cc pico-imx6ul: Remove CONFIG_FSL_USDHC from .h
cc97092f7c pico-imx6ul: Add new pico-hobbit config
11aaa94cd8 pico-imx6ul: Sync README with pico-imx7d
52723c960f pico-imx6ul: Improve default DFU settings
c90fa9c1a2 pico-imx6ul: Add bootmenu to choose the baseboard
2141bc7952 pico-imx6ul: Sync defconfig with new changes
9ff1d5305d pico-imx6ul: Update the README file
2b0e81461c pico-imx6ul: Add support for the 512MB module
e45ab0b309 pico-imx6ul: Add bmode support
ad3c1b13d8 pico-imx6ul: Add fastboot support
fa2c10bbac pico-imx6ul: Convert to SPL
b143e3f027 pico-imx6ul: Convert to distro config
a9c45f15b2 mx6sabre_common: Allow the videoargs to be passed to bootargs
b584b845b1 mx25pdk: Change root to use a single partition layout
146e490814 mx6sabre_common: Dynamically change the video output
a278950282 mx6sabresd: Enable video interfaces in bootargs
77cac8a16e mx6sabresd: Use LDO dtb file until LDO bypass support is added
be4d1c4100 mx6slevk: Use LDO dtb file until LDO bypass support is added
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
|
|
| |
Signed-off-by: Tom Hochstein <tom.hochstein@nxp.com>
|
|
|
|
|
|
| |
1e13b91af7 mx6sabre_common: Allow the videoargs to be passed to bootargs
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The u-boot-fslc now depends on bison to complete the build.
This patch fixes the following error message:
| rm -f .tmp_quiet_recordmcount
| make -f
/home/daiane/code/yocto/master/build/tmp/work/imx7dsabresd-fslc-linux-gnueabi/u-boot-fslc/v2018.07+gitAUTOINC+bc558729a7-r0/git/scripts/Makefile.build
obj=scripts/kconfig mx7dsabresd_config
| bison -oscripts/kconfig/zconf.tab.c -t -l
/home/daiane/code/yocto/master/build/tmp/work/imx7dsabresd-fslc-linux-gnueabi/u-boot-fslc/v2018.07+gitAUTOINC+bc558729a7-r0/git/scripts/kconfig/zconf.y
| /bin/sh: 1: bison: not found
| scripts/Makefile.lib:228: recipe for target
'scripts/kconfig/zconf.tab.c' failed
| make[2]: *** [scripts/kconfig/zconf.tab.c] Error 12
Signed-off-by: Daiane Angolini <daiane.angolini@nxp.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
|
|
|
|
|
|
|
|
| |
dtc-145-native is used by older U-Boot recipes. U-Boot only depends on
the native dtc binary. So, to not clash with files from the regular dtc native
build do only install the dtc binary renamed to dtc-145. Also, create
a new class to handle with dtc-145 dependency.
Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com>
Signed-off-by: Fabio Berton <fabio.berton@ossystems.com.br>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This updates the fork on top of current 2018.07 release and also adds
a much improved support to pico-imx7d and pico-imx6ul. The list of
commits included are:
bc558729a7 warp7: update defconfig to support the generic loading interface
e5a6138278 mx25pdk: Change root to use a single partition layout
f9d1e13cf5 mx6sabre_common: Dynamically change the video output
865268ce8a mx6sabresd: Enable video interfaces in bootargs
7db6f3d8c5 mx6sabresd: Use LDO dtb file until LDO bypass support is added
84fc5b0de1 mx6slevk: Use LDO dtb file until LDO bypass support is added
ccf16e75e7 pico-imx6ul: Convert to distro config
06eecc42a2 configs/imx: Remove 'mmcautodect' variable
12c65ae7a9 pico-imx7d: Add new pico-pi config
fe4fd4e1ea pico-imx7d: README: Drop old instructions about secure mode
a076cc293b pico-imx7d: README: Use dfu-util to flash U-Boot
24f9fcde47 pico-imx7d: Enable auxiliary code support
78fead0843 pico-imx7d: Allow default fdtfile to be overridden by defconfig
04d0d8894f pico-imx7d: Do not override addrmap5
e5833f48e6 pico-imx7d: Enable CONFIG_ARMV7_BOOT_SEC_DEFAULT
ceb9087434 pico-imx7d: Add Falcon mode support
8800626580 pico-imx7d: Add bootmenu to choose the baseboard
f2c33216e7 pico-imx7d: Add support for update SPL using DFU
6cc975154d pico-imx7d: Add SPL support
349985a0f2 pico-imx7d: Add fastboot support
76a4da5eb1 pico-imx7d: Add default DFU targets
c6c4a0e0d8 pico-imx7d: Add GPT partitioning support
9ac7204c7a pico-imx7d: Fix common distro configuration behavior
62523103a0 pico-imx7d: Convert to distro config
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Following changes are included:
11abda9 - armv8: ls2080ardb: update copyright claim
7d5b814 - Revert "EHCI: Fix endian access issue on EHCI intinalization"
160deab - Revert "powerpc/T104xRDB: Fix endian access issue on EHCI intinalization"
007ac5c - Revert "powerpc/p1_p2_rdb_pc: Fix endian access issue on EHCI intinalization"
e82a7bc - LS1043ARBD: Fix SD Boot issue with PPA
ec7f4b3 - armv8: ls1088a: change dpl load address to 0x80001000 from 0x80000000
93bb79f - board: freescale: ls1012afrwy: Add LS1012A-FRWY board support.
aabf70f - board: freescale: ls1012afrx:Common files to support
da97a2b - watchdog: disable to build the driver in default
60afe56 - watchdog: Kconfig: add config to disable wdog reset
cf17a12 - watchdog: driver support for layerscape
6ac9ac0 - armv8: ls1088: change ttyS1 to ttyS0
0c9305b - boards: freescale: lsch3: Add 0.9v entry for vid
0346460 - armv8: ls1088a: change dpl load command from apply to lazyapply.
c43f05a - drivers/net/vsc9953: Initialize action RAM in VCAP complex
0a1adba - board: Kconfig: Re-Arrangement of PPA firmware and header addresses
ecf1d55 - arm: ls1021aqds: config: enable CONFIG_ID_EEPROM for mac command
4d94f28 - board: freescale: ls1012ardb: Add command to switch QSPI bank
cba0675 - driver/mtd/spi: Default page size Spansion flash "S25FS512S" is 256b
7c4f3c8 - LS1012AFRWY: Add Secure Boot support
51a93cc - board: move ppa header address in board specific kconfig
e26f485 - board: ls1012a: FRWY-LS1012A board support
d000b14 - board: move ppa firmware address in board specific kconfig
2f51b35 - armv8: ls1088a: Enable USB in ls1088ardb_sdcard_qspi_SECURE_BOOT_defconfig
842df34 - armv8/fsl-lsch2: make the workaround for PIN MUX erratum A010539 robust
1fa9417 - armv8: sec_firmware: Add support for multiple loadables
eca9656 - armv8/fsl-lsch2: correct QMAN clock
c3a6ed4 - driver: net: fsl-mc: updated copyright info
39966d9 - armv8: ls1088a: Move CONFIG_BOOTARGS and CONFIG_CMD_GREPENV to defconfig
ccde7d9 - armv8: ls1088aqds: Enable mdio commands on u-boot prompt
9c912c7 - armv8: sec_firmware: Remove JR3 from device tree node in all cases
5ecc2f5 - mmc: fsl_esdhc: fix probe issue without CONFIG_BLK enabled
8ed20db - usb: Add delay to fix USB 2.0 stick enumeration failure on LS208xA
b133620 - EHCI: Fix endian access issue on EHCI intinalization
faf6feb - u-boot: fixup the iommu-map property of fsl-mc node
8e0c780 - powerpc: configs: Set initrd_high environment varible
Signed-off-by: Chunrong Guo <chunrong.guo@nxp.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
|
|
|
|
|
|
| |
We need dtc version 1.4.5 to build u-boot-imx 2017.03, current
version 1.4.6 raise a lot of errors and can't build older U-Boot
version.
Signed-off-by: Fabio Berton <fabio.berton@ossystems.com.br>
|
|
|
|
|
|
|
|
| |
- Update to latest stable branch
- Add O.S. Systems Software Copyright
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Signed-off-by: Fabio Berton <fabio.berton@ossystems.com.br>
|
|
|
|
|
|
|
|
|
|
|
| |
Following changes are included:
a092fb1504 spl: Add default values for ARCH_MX7
17ee0afbc7 wandboard: Remove hardcoded baudrate from "console" variable
a9cd19f296 pico-imx7d: Adjust the dtb name
Change-Id: If3c37fb22924dbd7489c188ff45dd590224e255c
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
|
|
|
|
|
|
| |
The revision used was of a pre-release and we ought to instead point
to the current final release. Fixup it.
Change-Id: Ic1ff8641a3b1d135610b51b5051c2974daf9d88c
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
|
|
|
|
| |
This upgrades the fork for the latest stable release.
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
|
|
|
|
|
|
|
| |
The dtc must be available during build time. It fixes a build error
when host does not have it installed and we are building a native
variant.
Change-Id: I3a64d40575bce9ae4289a419ea8892fe006b7de6
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
|
|
|
| |
Signed-off-by: Chunrong Guo <chunrong.guo@nxp.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|