summaryrefslogtreecommitdiffstats
path: root/conf
Commit message (Collapse)AuthorAgeFilesLines
* imx-base.inc: Fix opencv preferred versionTom Hochstein2021-05-041-1/+1
| | | | | | The i.MX fork of opencv is upgraded to 4.5.2.imx. Fix the preferred version. Signed-off-by: Tom Hochstein <tom.hochstein@nxp.com>
* imx-base.inc: use 0x80008000 as the UBOOT_ENTRYPOINT for mx6ul, mx6ull and ↵Marc Ferland2021-05-041-3/+3
| | | | | | | | | | mx6ulz Based on the different reference manuals, the DDR controller for the mx6ul, mx6ull and mx6ulz is at 0x80000000 and not 0x10000000 like the imx6 dual or quad for example. Signed-off-by: Marc Ferland <ferlandm@amotus.ca>
* imx8mp-lpddr4-evk: Add device trees for basler cameraTom Hochstein2021-04-301-0/+2
| | | | Signed-off-by: Tom Hochstein <tom.hochstein@nxp.com>
* imx8dxl-ddr3l-evk: Fix machine nameTom Hochstein2021-04-281-0/+0
| | | | | | The machine variant is for DDR3L memory, so fix the name. Signed-off-by: Tom Hochstein <tom.hochstein@nxp.com>
* imx8dxl-ddr3-evk: Fix BOARD_TYPETom Hochstein2021-04-281-0/+2
| | | | | | | | The BOARD_TYPE used for this board by imx-sc-firmware is val. It will eventually be evk, but for now using evk is wrong and causes the board to fail to boot. Signed-off-by: Tom Hochstein <tom.hochstein@nxp.com>
* ls1043/ls1046: use _prepend to adjust dtb orderTing Liu2021-04-223-3/+3
| | | | | | | | When generating fitImage, the default configuration uses the first dtb file in KERNEL_DEVICETREE. Change to _prepend to adjust the dtb order, thus changing the default configuration in fitImage if using nxp BSP. Signed-off-by: Ting Liu <ting.liu@nxp.com>
* Move mesa/etnaviv to xf86-video-modesettingAndreas Müller2021-04-201-1/+5
| | | | | | | * armada sources are gone finally * glmark2-es2 performance is almost doubled 87 -> 162 Signed-off-by: Andreas Müller <schnitzeltony@gmail.com>
* ls1043/ls1046: add wic.bz2 as default IMAGE_FSTYPESTing Liu2021-04-201-0/+2
| | | | Signed-off-by: Ting Liu <ting.liu@nxp.com>
* qoriq: remove ext2.gz from default IMAGE_FSTYPESTing Liu2021-04-201-1/+1
| | | | | | | | | | The classic initial ramdisk has been replaced by the much more flexible and efficient initramfs a long time. Kernel warns about it being removed soon. Remove ext2.gz from default IMAGE_FSTYPES. Signed-off-by: Ting Liu <ting.liu@nxp.com>
* ls1043/ls1046: support WIC image generationTing Liu2021-04-204-0/+29
| | | | Signed-off-by: Ting Liu <ting.liu@nxp.com>
* u-boot-imx-tools: Drop i.MX specific toolsOtavio Salvador2021-04-181-5/+0
| | | | | | | | | | | We are building same tools as the original U-Boot thus we should rely on them. This is critical as native tools cannot vary between machines as there are no clear reason to convert this to be a cross tool as we build no machine specific code. Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
* imx-base.inc: Provide a default value for SPL_BINARYOtavio Salvador2021-04-142-1/+7
| | | | | | | | | This fixes the build case when machine does not use SPL and does not set it. We couldn't use dynamic expansion or we trigger a recursive expansion so we opted to use an utility function to do the proper logic. Fixes: f98059fe ("imx-base.inc: Allow use of SPL_BINARY variable inside wic images") Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
* imx-base.inc: Allow use of SPL_BINARY variable inside wic imagesOtavio Salvador2021-04-131-0/+4
| | | | | Fixes: 776932e1 ("Rework the u-boot-fslc and u-boot-imx settings logic") Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
* imx-base.inc: Fix mfgtool selection for u-boot-fslcOtavio Salvador2021-04-131-1/+2
| | | | | | | | | For eventual use of u-boot-fslc as mfgtool flavor, this will need to be provided as an extra UBOOT_CONFIG thus reusing same provider. This fix some build errors with external layers. Fixes: 776932e1 ("Rework the u-boot-fslc and u-boot-imx settings logic") Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
* imx8dxl-ddr3-evk: Add support for 8DXLite EVK with DDR3Tom Hochstein2021-04-101-0/+9
| | | | Signed-off-by: Tom Hochstein <tom.hochstein@nxp.com>
* imx8dxl-lpddr4-evk: Rework machine for re-useTom Hochstein2021-04-102-17/+30
| | | | Signed-off-by: Tom Hochstein <tom.hochstein@nxp.com>
* imx8dxl-evk: Set NXP BSP as default and add device treeTom Hochstein2021-04-101-0/+3
| | | | Signed-off-by: Tom Hochstein <tom.hochstein@nxp.com>
* imx6ulevk: Fix comment about SPL supportOtavio Salvador2021-04-101-2/+1
| | | | | Signed-off-by: Otavio Salvador <otavio@ossystems.com.br> Change-Id: If9e1b788bebeef4429a2ed71756aac54629cba30
* imx8mp-ddr4-evk: Set mainline BSP to use u-boot-imx for nowTom Hochstein2021-04-071-0/+4
| | | | | | | | Since u-boot-fslc doesn't yet support this machine, set the configuration for mainline BSP to use u-boot-imx. Fixes #710. Signed-off-by: Tom Hochstein <tom.hochstein@nxp.com>
* conf: imx8mp-evk.inc: correct u-boot make targetAndrey Zhizhikin2021-04-071-1/+1
| | | | | | | | | | | | | U-Boot make target set to empty string does not expand correctly for mainline BSP build, which append make target with 'flash.bin' entry. This causes the build to fail, since the u-boot.bin target is not produced when only 'flash.bin' is present in the make target list. Define the default make target to 'all', which allows proper build target expansion. Fixes: 823a97cf ("imx8mp-lpddr4-evk: Rework 8M Plus EVK config file") Signed-off-by: Andrey Zhizhikin <andrey.z@gmail.com>
* conf/layer.conf: Drop unused dynamic entriesOtavio Salvador2021-04-051-6/+0
| | | | | Signed-off-by: Otavio Salvador <otavio@ossystems.com.br> Change-Id: Id562d79bff400a9b05606e1d2fe0e1eca11b6c95
* imx8mp-ddr4-evk: Add machine config for i.MX 8M Plus EVK with DDR4Tom Hochstein2021-03-301-0/+23
| | | | Signed-off-by: Tom Hochstein <tom.hochstein@nxp.com>
* imx8mp-lpddr4-evk: Rework 8M Plus EVK config fileTom Hochstein2021-03-303-93/+102
| | | | | | | | | There are two variants of the 8M Plus Evaluation Kit board, one with LPDDR4 and one with DDR4. Rework our existing config file to make this distinction explicit in the machine config file name and to allow for configuration re-use. Signed-off-by: Tom Hochstein <tom.hochstein@nxp.com>
* conf/layer.conf: Rename browser-layer as chromium-browser-layerPablo Saavedra2021-03-261-2/+5
| | | | | | | | | | | | | This commit updates the directory name of the browser-layer dynamic-layer because the changes introduced in https://github.com/OSSystems/meta-browser/pull/470. This browser-layer doesn't exist anymore in the meta-browser layer being replaced by a new chromium-browser-layer. For backwards compatibility this changes keeps the entries associated to the former browser-layer pointing to the new chromium-browser-layer. Signed-off-by: Pablo Saavedra <psaavedra@igalia.com>
* Rework the u-boot-fslc and u-boot-imx settings logicOtavio Salvador2021-03-2425-31/+187
| | | | | | | | | | We need to make it more obvious what is in use, when we support both bootloaders and for it we are now using the _pn suffix for both. This also fixes the WIC_FILE depending on the choice otherwise image build fails. Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
* imx6qdlsabreauto: Rework u-boot-imx defconfig as distro agnosticOtavio Salvador2021-03-241-3/+3
| | | | | | We now bind the defconfig to the 'u-boot-imx' package. Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
* imx6qdlsabresd: Rework u-boot-imx defconfig as distro agnosticOtavio Salvador2021-03-241-3/+3
| | | | | | We now bind the defconfig to the 'u-boot-imx' package. Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
* imx-base.inc: Allow override of IMX_DEFAULT_BOOTLOADEROtavio Salvador2021-03-241-2/+2
| | | | | | | We need to allow the override of the variable in 'local.conf' or other places, so we cannot overwrite it inside imx-base.inc. Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
* Revert "imx6*.conf: Rework machine assignments for u-boot variables"Otavio Salvador2021-03-243-18/+15
| | | | This reverts commit cc4b91bf3a3cf5c2034372c607783048aae44b65.
* imx8dxl-evk: Set ATF_PLATFORM and IMX_BOOT_SOC_TARGETOtavio Salvador2021-03-241-0/+3
| | | | | | This sets the required variables so the target is buildable. Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
* imx51evk: Drop old perf fixup as we now use Linux mainlineOtavio Salvador2021-03-241-3/+0
| | | | Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
* imx28evk: Drop unused IMXBOOTLETS_MACHINE variableOtavio Salvador2021-03-241-2/+0
| | | | Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
* conf: machine: imx8m: make optee feature nxp dependentAndrey Zhizhikin2021-03-173-6/+13
| | | | | | | | | Mainline BSP does have lockups in boot when OP-TEE is included in the build. Make optee feature enabled only when NXP BSP flavor is chosen. Signed-off-by: Andrey Zhizhikin <andrey.z@gmail.com>
* conf: machine: mx8m[m,n,p]: use boot container classAndrey Zhizhikin2021-03-174-11/+28
| | | | | | | | | | | | | | | Use the new boot container build on mainline BSP for mx8mm, mx8mn and mx8mp machines. Boot container serves as a replacement for imx-boot package present in NXP BSP, and is created by U-Boot build system. Define ATF machine name and required load address. Define dependency on firmware package, as it provides DDR firmware binaries needed to construct boot container. Signed-off-by: Andrey Zhizhikin <andrey.z@gmail.com>
* imx-base.inc: add boot container condition and wks dependencyAndrey Zhizhikin2021-03-171-1/+31
| | | | | | | | | | | | | | | | Boot container provided by mainline U-Boot build can be used directly int the result image file, and does not depends on the imx-boot component provided by NXP. Define variable to be used for conditional inheritance on the imx-boot-container class when 'imx-boot-container' is present in machine overrides. Modify WKS dependency to imx-boot for mainline BSP built for aarch64 to use imx-boot when derivative does not set the boot container compatibility in its overrides. Signed-off-by: Andrey Zhizhikin <andrey.z@gmail.com>
* optee-imx: Upgrade to 3.10.0Tom Hochstein2021-03-161-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Update all recipes to pull sources from imx_5.4.70_2.3.0 branch in NXP upstream and update SRCREV to match release tags. Update PREFERRED_VERSION of optee for mx8 to point to 3.10.0.imx. Following notes are additions to the version update of recipes: -------------------------- optee-client: - Drop CFLAGS patch as it is already applied upstream optee-os: - Drop gcc10 patch as it is already applied upstream - Add dependency on python3-pycryptodomex-native - Drop NOWERROR flag as package is reworked to disable warnings by default - Rework mkimage load address since tee-init_load_addr.txt is no longer created optee-test: - Drop python3 patch as it is already applied upstream - Remove unused patch files from layer - Add dependency on python3-pycryptodomex-native - Add sysroot to C and C++ flags Fixes #686, fixes #689. Signed-off-by: Tom Hochstein <tom.hochstein@nxp.com>
* imx6*.conf: Rework machine assignments for u-boot variablesTom Hochstein2021-03-133-15/+18
| | | | | | | | | | | | | | | | | | The u-boot settings in imx6qdlsabresd, imx6qdlsabreauto, and imx6ulevk are set to values that are correct for u-boot-fslc. Attempts to override these settings to fix u-boot-imx builds have broken u-boot-fslc builds, and vice versa. The u-boot-imx build is currently broken: ``` | install: cannot stat '/opt/work/upstream/fsl-xwayland/tmp/work/imx6qdlsabresd-fsl-linux-gnueabi/u-boot-imx/2020.04-r0/build/u-boot.img': No such file or directory ``` Rework the u-boot-fslc-specific overrides so they are used conditionally only for u-boot-fslc. The default settings are correct for u-boot-imx. Fixes: 880dbf2 ("fsl-base.inc: use conditional assignment for base variables") Fixes: e83f54d ("machines: imx-base.inc: fix failing u-boot builds") Signed-off-by: Tom Hochstein <tom.hochstein@nxp.com>
* imx-base.inc: CleanupTom Hochstein2021-03-131-2/+1
| | | | | | | - Remove redundant variable assignment - Move creeping comment back where it belongs Signed-off-by: Tom Hochstein <tom.hochstein@nxp.com>
* imx-base: use i.MX opencv version for mx8Chris Dimich2021-03-021-0/+3
| | | | | | Use i.MX fork to support additional machine learning demos and tiny dnn. Signed-off-by: Chris Dimich <Chris.Dimich@boundarydevices.com>
* imx-base: cleanup u-boot-toolsMax Krummenacher2021-02-221-4/+5
| | | | | | | | | | | | | There is no u-boot-fslc-tools recipe and thus the PREFERRED_PROVIDER is not available for u-boot-tools. Prevents: | NOTE: Multiple providers are available for u-boot-mkimage-native (u-boot-imx-tools-native, u-boot-tools-native) | Consider defining a PREFERRED_PROVIDER entry to match u-boot-mkimage-native | NOTE: Multiple providers are available for runtime nativesdk-u-boot-mkimage (nativesdk-u-boot-imx-tools, nativesdk-u-boot-tools) | Consider defining a PREFERRED_RPROVIDER entry to match nativesdk-u-boot-mkimage Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com>
* imx8qm-mek: Fix SPL_BINARY assignmentTom Hochstein2021-02-131-1/+1
| | | | | | | | | | | | | | | The SPL_BINARY was no longer being set properly after the machine name change from imx8qmmek to imx8qm-mek, resulting in the following build break for imx-boot: ``` | make[1]: *** No rule to make target 'u-boot-spl.bin', needed by 'flash_spl'. Stop. ``` The override of the machine name is of course redundant here, so just drop the override. Signed-off-by: Tom Hochstein <tom.hochstein@nxp.com>
* imx8qm-mek: Add device tree for esaiTom Hochstein2021-02-121-0/+1
| | | | Signed-off-by: Tom Hochstein <tom.hochstein@nxp.com>
* imx8mq-evk: Add device trees for rm67199Tom Hochstein2021-02-121-0/+2
| | | | Signed-off-by: Tom Hochstein <tom.hochstein@nxp.com>
* imx8mm-lpddr4-evk: Add device tree for QCA Wi-FiTom Hochstein2021-02-121-0/+1
| | | | Signed-off-by: Tom Hochstein <tom.hochstein@nxp.com>
* imx-base.inc: Add PREFERRED_PROVIDER_u-boot-mfgtoolTom Hochstein2021-02-091-0/+1
| | | | | | | Add a preferred provider for u-boot-mfgtool since it also has both a community and an i.MX version. Signed-off-by: Tom Hochstein <tom.hochstein@nxp.com>
* gstreamer1.0*: Fix versions for i.MX fork recipesTom Hochstein2021-02-011-4/+4
| | | | | | | | | | | | | The gstreamer1.0 recipes for the i.MX forks were updated to a newer version, but the file versions were not updated accordingly. For the NXP 5.4.47 release, the gstreamer version is 1.16.2.imx. For NXP 5.4.70, the gstreamer version is 1.16.3.imx. Note that the original version 1.16.imx was not appropriate either, and this fix can also be viewed from that perspective, that the third digit of the version should be included in the recipe version. Signed-off-by: Tom Hochstein <tom.hochstein@nxp.com>
* imx8mp-evk: update ddr firmware version as required by imx-bootAndrey Zhizhikin2021-02-011-4/+5
| | | | | | | | | | | | | imx-boot update 5.4.70_2.3.0 requires a new version of ddr firmware to be deployed and used for imx8mp machine (201904 -> 202006). This is introduced in commits of imx-boot git tree: 322a834 ("MLK-24860 iMX8MP: Use 202006 DDR4 firmware") 658c54a ("MLK-24788 iMX8MP: Update LPDDR4 Firmware to 202006 version") Update ddr firmware name to include new version in machine config file. Signed-off-by: Andrey Zhizhikin <andrey.z@gmail.com>
* imx8mm-lpddr4-evk: follow changed device tree nameMax Krummenacher2021-02-013-1/+2
| | | | | | | | The kernel from rel_imx_5.4.70_2.3.0 got one device tree name changed: imx8mm-evk-revb.dts -> imx8mm-evk-revb-qca-wifi.dts Follow that in the machine config to keep the machine buildable. Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com>
* imx-base: upgrade to release 5.4.70_2.3.0Max Krummenacher2021-02-011-7/+10
| | | | | | | | | Update PREFERRED to release 5.4.70_2.3.0. imx-gpu-viv now has opencl-clhpp in PROVIDES. Set this as the preferred provider. Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com>
* imx-base.inc: add Gstreamer default for all iMX8 familiesPierluigi Passaro2021-01-311-0/+9
| | | | | | | | Set MACHINE_GSTREAMER_1_0_PLUGIN for mx8mq, mx8qm and mx8qxp machines. Also, set PREFERRED_VERSION_gstreamer1.0 and related plugins for all mx8 machines. Signed-off-by: Pierluigi Passaro <pierluigi.p@variscite.com>
generated by cgit v1.2.3-54-g00ecf (git 2.39.0) at 2025-02-24 11:01:21 +0000