1 files changed, 0 insertions, 93 deletions

diff --git a/conf/machine/imx8mp-evk.conf b/conf/machine/imx8mp-evk.conf
deleted file mode 100644
index 8dbbe8d0..00000000
--- a/conf/machine/imx8mp-evk.conf
+++ /dev/null
@@ -1,93 +0,0 @@
-#@TYPE: Machine
-#@NAME: NXP i.MX 8M Plus EVK
-#@SOC: i.MX8MP
-#@DESCRIPTION: Machine configuration for NXP i.MX 8M Plus Evaluation Kit
-#@MAINTAINER: Jun Zhu <junzhu@nxp.com>
-
-MACHINEOVERRIDES =. "imx-boot-container:mx8:mx8m:mx8mp:"
-
-require conf/machine/include/imx-base.inc
-require conf/machine/include/tune-cortexa53.inc
-
-MACHINE_FEATURES += "pci wifi bluetooth jailhouse"
-
-# OP-TEE is also applicable to NXP BSP, mainline BSP seems not to have
-# a full support for it yet.
-MACHINE_FEATURES_append_use-nxp-bsp = " optee mrvl8997"
-
-# Mainline kernel contains only one DTB file for
-# imx8mpevk machine
-KERNEL_DEVICETREE = "freescale/imx8mp-evk.dtb"
-
-# NXP kernel has additional DTB files for various board configuration and
-# derivates. Include them here for NXP BSP only
-KERNEL_DEVICETREE_append_use-nxp-bsp = " \
-        freescale/imx8mp-ab2.dtb \
-        freescale/imx8mp-evk-basler.dtb \
-        freescale/imx8mp-evk-basler-ov5640.dtb \
-        freescale/imx8mp-evk-dsp.dtb \
-        freescale/imx8mp-evk-dsp-lpa.dtb \
-        freescale/imx8mp-evk-dual-ov2775.dtb \
-        freescale/imx8mp-evk-flexcan2.dtb \
-        freescale/imx8mp-evk-inmate.dtb \
-        freescale/imx8mp-evk-it6263-lvds-dual-channel.dtb \
-        freescale/imx8mp-evk-jdi-wuxga-lvds-panel.dtb \
-        freescale/imx8mp-evk-ov2775.dtb \
-        freescale/imx8mp-evk-ov2775-ov5640.dtb \
-        freescale/imx8mp-evk-pcie-ep.dtb \
-        freescale/imx8mp-evk-rm67191.dtb \
-        freescale/imx8mp-evk-root.dtb \
-        freescale/imx8mp-evk-rpmsg.dtb \
-        freescale/imx8mp-evk-sof-wm8960.dtb \
-        freescale/imx8mp-evk-spdif-lb.dtb \
-"
-
-IMX_DEFAULT_BOOTLOADER_use-nxp-bsp = "u-boot-imx"
-IMX_DEFAULT_BOOTLOADER_use-mainline-bsp = "u-boot-fslc"
-
-UBOOT_SUFFIX = "bin"
-
-UBOOT_CONFIG ??= "sd"
-UBOOT_CONFIG[sd]      = "imx8mp_evk_defconfig,sdcard"
-UBOOT_CONFIG[fspi]    = "imx8mp_evk_defconfig"
-UBOOT_CONFIG[ecc]     = "imx8mp_evk_inline_ecc_defconfig"
-UBOOT_CONFIG[mfgtool] = "imx8mp_evk_defconfig"
-
-SPL_BINARY = "spl/u-boot-spl.bin"
-
-# Set DDR FIRMWARE
-DDR_FIRMWARE_VERSION = "202006"
-DDR_FIRMWARE_NAME = " \
-        lpddr4_pmu_train_1d_dmem_${DDR_FIRMWARE_VERSION}.bin \
-        lpddr4_pmu_train_1d_imem_${DDR_FIRMWARE_VERSION}.bin \
-        lpddr4_pmu_train_2d_dmem_${DDR_FIRMWARE_VERSION}.bin \
-        lpddr4_pmu_train_2d_imem_${DDR_FIRMWARE_VERSION}.bin \
-"
-
-# Set u-boot DTB
-UBOOT_DTB_NAME = "imx8mp-evk.dtb"
-
-# Set ATF platform name and load address
-ATF_PLATFORM = "imx8mp"
-ATF_LOAD_ADDR = "0x970000"
-
-# Extra firmware package name, that is required to build boot container for fslc bsp
-IMX_EXTRA_FIRMWARE = "firmware-imx-8m"
-
-# Set imx-mkimage boot target
-IMXBOOT_TARGETS = "${@bb.utils.contains('UBOOT_CONFIG', 'fspi', 'flash_evk_flexspi', 'flash_evk', d)}"
-IMX_BOOT_SOC_TARGET = "iMX8MP"
-
-# Set Serial console
-SERIAL_CONSOLES = "115200;ttymxc1"
-
-LOADADDR = ""
-UBOOT_SUFFIX = "bin"
-UBOOT_MAKE_TARGET = "all"
-IMX_BOOT_SEEK = "32"
-
-OPTEE_BIN_EXT = "8mp"
-TEE_LOAD_ADDR = "0x56000000"
-
-# Add additional firmware
-MACHINE_FIRMWARE_append = " linux-firmware-ath10k"