1 files changed, 55 insertions, 0 deletions

diff --git a/conf/machine/imx8mnevk.conf b/conf/machine/imx8mnevk.conf
new file mode 100644
index 00000000..b74805d2
--- /dev/null
+++ b/conf/machine/imx8mnevk.conf
@@ -0,0 +1,55 @@
+#@TYPE: Machine
+#@NAME: NXP i.MX8M Nano DDR4 Evaluation Kit
+#@SOC: i.MX8MM
+#@DESCRIPTION: Machine configuration for NXP i.MX8M Nano DDR4 EVK
+#@MAINTAINER: Andrey Zhizhikin <andrey.z@gmail.com>
+
+MACHINEOVERRIDES =. "mx8:mx8m:mx8mn:"
+
+require conf/machine/include/imx-base.inc
+require conf/machine/include/tune-cortexa53.inc
+
+MACHINE_FEATURES += "wifi bluetooth optee bcm43455"
+
+KERNEL_DEVICETREE = "freescale/fsl-imx8mn-ddr4-evk-ak5558.dtb \
+                     freescale/fsl-imx8mn-ddr4-evk-inmate.dtb \
+                     freescale/fsl-imx8mn-ddr4-evk.dtb \
+                     freescale/fsl-imx8mn-ddr4-evk-rm67191.dtb \
+                     freescale/fsl-imx8mn-ddr4-evk-rpmsg.dtb \
+                     freescale/fsl-imx8mn-ddr4-evk-root.dtb"
+
+UBOOT_CONFIG ??= "sd"
+UBOOT_CONFIG[sd] = "imx8mn_ddr4_evk_defconfig,sdcard"
+UBOOT_CONFIG[mfgtool] = "imx8mn_ddr4_evk_defconfig"
+SPL_BINARY = "spl/u-boot-spl.bin"
+
+# Set DDR FIRMWARE
+DDR_FIRMWARE_NAME = "ddr4_imem_1d_201810.bin \
+                     ddr4_dmem_1d_201810.bin \
+                     ddr4_imem_2d_201810.bin \
+                     ddr4_dmem_2d_201810.bin"
+
+# Set u-boot DTB
+UBOOT_DTB_NAME = "fsl-imx8mn-ddr4-evk.dtb"
+
+# Set imx-mkimage boot target
+IMXBOOT_TARGETS = "${@bb.utils.contains('UBOOT_CONFIG', 'fspi', 'flash_ddr4_evk_flexspi', 'flash_ddr4_evk', d)}"
+
+# Set Serial console
+SERIAL_CONSOLES = "115200;ttymxc1"
+
+IMAGE_BOOTLOADER = "imx-boot"
+BOOT_SPACE = "65536"
+LOADADDR = ""
+UBOOT_SUFFIX = "bin"
+UBOOT_MAKE_TARGET = ""
+
+# Image boot offset as defined in section 6.1.6.1 "Primary image offset and IVT offset" of
+# i.MX 8M Nano Applications Processor Reference Manual, Rev. 0, 12/2019
+# Doc ID: IMX8MNRM
+IMX_BOOT_SEEK = "32"
+
+OPTEE_BIN_EXT = "8mn"
+
+# Add additional firmware
+MACHINE_FIRMWARE_append = " linux-firmware-ath10k"