wic:mx8: Create wks file for imx8 family using imx-boot

imx8 family boards use u-boot as boot loader in addition to some other
binaries. The final bootloader binary is gathered by mkimage into a file
called imx-boot.

Add the wks file to create the wic image tailored for imx8 family.
Set the wks file as default for all imx8.

Signed-off-by: Daiane Angolini <daiane.angolini@nxp.com>

1 files changed, 20 insertions, 0 deletions

diff --git a/wic/imx-imx-boot-bootpart.wks b/wic/imx-imx-boot-bootpart.wks
new file mode 100644
index 00000000..11b90492
--- /dev/null
+++ b/wic/imx-imx-boot-bootpart.wks
@@ -0,0 +1,20 @@
+# short-description: Create SD card image with a boot partition
+# long-description:
+# Create an image that can be written onto a SD card using dd for use
+# with i.MX SoC family
+# It uses u-boot + other binaries gathered together on imx-boot file
+#
+# The disk layout used is:
+#  - ---------- -------------- --------------
+# | | imx-boot |     boot     |    rootfs   |
+#  - ---------- -------------- --------------
+# ^ ^          ^              ^
+# | |          |              |
+# 0 33kiB    4MiB          16MiB + rootfs + IMAGE_EXTRA_SPACE (default 10MiB)
+#
+part u-boot --source rawcopy --sourceparams="file=imx-boot" --ondisk mmcblk --no-table --align 33
+part /boot --source bootimg-partition --ondisk mmcblk --fstype=vfat --label boot --active --align 4096 --size 16
+part / --source rootfs --ondisk mmcblk --fstype=ext4 --label root --align 4096
+
+bootloader --ptable msdos
+