linux-fslc: Update to 4.6-based fork

This upgrades the Linux kernel to the upcoming 4.6 release. This
includes some NXP related changes, which are target for 4.7. Those
are:

9be3cdc ARM: mx5: dts: Enable USB OTG on M53EVK
fe805c7 ARM: imx_v6_v7_defconfig: add CONFIG_MICREL_PHY
e23d4ee ARM: imx_v6_v7_defconfig: add CONFIG_I2C_GPIO
bc9f274 ARM: dts: imx6ul-14x14-evk: Add audio support
9214de9 ARM: dts: imx6qdl: Remove unneeded unit-addresses
49d0bea clk: imx7d: fix ahb clock mux 1
eda0002 ARM: dts: imx6: apalis: parallel lcd display support on ixora
d9f2c8c ARM: dts: imx6sx-sdb: Add 198MHz operational point
fa13784 ARM: dts: imx28-m28: Remove unneeded partition nodes
67c050c ARM: dts: imx6ul-pico-hobbit: Add initial support
41de276 ARM: dts: imx6: Do not hardcode the CLKO clock
13d63a6 ARM: dts: imx6: Add dts for Embest MarS Board
7d9db51 arm64: defconfig: enable freescale/nxp config options
b9990f8 arm64: defconfig: enable 48-bit virtual addresses
36e1773 arm64: defconfig: cleanup the defconfig
3eb72e5 clk: imx: return correct frequency for Ethernet PLL
4e744f4 ARM: dts: imx6: fix dtc warnings for ipu endpoints
9c17803 ARM: dts: imx6dl: Fix the VDD_ARM_CAP voltage for 396MHz operation
b6e07a8 ARM: dts: imx6sx: Add 198MHz operating point
c4cb697 ARM: dts: imx6ul: Fix operating points
e593654 arm64: dts: ls2080a: fsl-mc dt node updates
dc4a4c1 Documentation: fsl-mc: binding updates for MSIs, ranges, PHYs
43efec0 ARM: dts: imx6q-ba16: use wdog external reset
6a5ebd9 ARM: dts: imx: b450/b650v3: Move ldb_di clk assignment
ecfff5f ARM: dts: imx6q-b850v3: Update display clock source
82b8386 ARM: dts: imx6q-b850v3: Remove ldb panel
b0b039a ARM: dts: imx6qdl-udoo: add 7 inch LCD touchscreen panel support
1d5276b ARM: dts: i.MX3x: add keypad port devicetree nodes
db45d65 ARM: dts: imx35: restore existing used clock enumeration
3af9f8f arm64: dts: ls1043a: add the DTS node for QSPI support
e651264 Documentation: fsl-quadspi: Add fsl,ls1043a-qspi compatible string
5712e33 ARM: dts: ls1021a: add pix clock to DCU dts node
8ad4cee ARM: dts: ls1021a: DSPI has 6 chip-selects
8804a3f ARM: dts: ls1021a: Add gpio support for ls1021a platform
f0f7b30 ARM: dts: imx6q-ba16: Remove unused vqmmc-supply
cb8dacf ARM: dts: ls1021a: add SCFG MSI dts node
4a26cfb ARM: dts: imx28: add alternative pinmuxing for mac0
f407acf ARM: dts: imx6q-tbs2910: fix fec reset polarity
aefe710 ARM: dts: vf610-zii-dev: Add ZII development board.
2045498 ARM: dts: vfxxx: add missing reg properties
95bd770 ARM: dts: vf-colibri: increase NAND clock speed
cbd99f4 ARM: dts: vf-colibri: alias the primary FEC as ethernet0
6216880 ARM: dts: imx6sx-sdb: Add SAI support
b547d70 bindings: fsl-imx-sdma: Document 'fsl,sdma-event-remap' property
e74a168 ARM: dts: imx6sx: Remove unused property
4d9b42e ARM: dts: imx6sx: Fix SAI DMA index
6f7a786 ARM: dts: imx6q-ba16: Disable pwm2 by default
d28c0fc ARM: dts: imx: add Boundary Devices Nitrogen6_SoloX board
d2985a5 ARM: dts: imx6qdl-sabresd: Pass the hannstar panel compatible string
815f031 ARM: dts: imx6: add support for the Ka-Ro electronics 'MB7' baseboard
4531f68 ARM: dts: imx6: add support for more Ka-Ro electronics modules
a5c5a20 ARM: dts: imx6-tx6: enable support for rtscts on UARTs
7686c67 ARM: dts: imx6-tx6: remove LED pinctrl setting from hoggrp
e806f1d6 ARM: dts: imx6-tx6: remove regulator bus
5288f69 ARM: dts: imx: add Boundary Devices Nitrogen6_MAX QP board
84757ea ARM: dts: imx6qdl-tx6: add mdio node for ethernet phy
f756d41 ARM: dts: imx6-tx6: remove container node around pinctrl nodes
72e625a ARM: dts: imx6-tx6: disable the spi node by default
69751fa ARM: dts: imx6-tx6: cleanup; no functional change
0f276c6 ARM: dts: imx6-tx6: Relicense the Ka-Ro DT files under GPLv2/X11
2fb431b ARM: dts: imx25-pinfunc: remove SION for pins with an UART handshaking input mode
7a1e22f ARM: dts: imx25-pinfunc: add all UART mux modes
395dbf3 ARM: dts: imx: ba16: Add correct PCIe Tx Values
b872157 ARM: dts: imx6ul: add support for Ka-Ro electronics TXUL mainboard
290d3f9 ARM: dts: imx6ul: add support for Ka-Ro electronics TXUL modules
2ce39b6 ARM: dts: vf610-colibri: enable display controller
8411ccb ARM: dts: vf610: add display nodes
4c36ca7 ARM: dts: imx: add Boundary Devices Nitrogen7 board
b46656d ARM: dts: imx7d: add flexcan support
d587538 ARM: dts: imx7d: add lcdif support
b1334df arm64: dts: ls2080a: Add compatible "fsl,ls2080a-gpio" for ls2080a gpio nodes
8e403e3 arm64: dts: ls1043a: Add compatible "fsl,qoriq-gpio" for ls1043a gpio nodes
9c3e8d5 arm64: dts: ls2080a: update the DTS for QSPI and DSPI support
d03665c Documentation: fsl: dspi: Add fsl,ls2080a-dspi compatible string
0e01fa6 arm64: dts: ls1043a-rdb: add the DTS for DSPI support
5139b339 ARM: multi_v5_defconfig: Enable recommended options for systemd
c29da9c4 ARM: imx: always use TWD on IMX6Q
dbcb3b1 clk: imx: vf610: fix whitespace in vf610-clock.h
7115a09 clk: imx: vf610: add TCON ipg clock
9241416 clk: imx: vf610: fix DCU clock tree
be27a3e ARM: multi_v5_defconfig: Enable support for MX21/MX27
4cedc0d ARM: imx_v6_v7_defconfig: add CONFIG_RTC_DRV_M41T80
7241dc3 ARM: imx_v6_v7_defconfig: add CONFIG_I2C_MUX_GPIO
a60e2c2 ARM: imx_v6_v7_defconfig: add FT5x06 and TSC2004 touch support
e4ca550 clk: imx: add ckil clock for i.MX7
118e922 clk: imx: vf610: add suspend/resume support
189c8c1 clk: imx: vf610: add WKPU unit
ef2f187 clk: imx: vf610: leave DDR clock on
9a0e7b6 clk: imx: clk-gate2: allow custom gate configuration
4ecea9b clk: imx6sx: Register SAI clocks as shared clocks
abb9468 arm64: dts: add LS1043a-QDS board support
d6505c6 Documentation: DT: Add entry for Freescale LS1043a-QDS board

Change-Id: Ia4693a462743e532d412fb3213cfee1149496c8a
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>

0 files changed, 0 insertions, 0 deletions