u-boot-fslc: Upgrade to 2017.07-based release

This release provides a huge improvement regarding the support for SPL
to more boards.

We now uses this and migrated following boards:

 - imx6qpsabresd -> imx6qdlsabresd
 - imx6qsabresd -> imx6qdlsabresd
 - imx6dlsabresd -> imx6qdlsabresd
 - imx6solosabresd -> imx6qdlsabresd
 - imx6qpsabreauto -> imx6qdlsabreauto
 - imx6qsabreauto -> imx6qdlsabreauto
 - imx6dlsabreauto -> imx6qdlsabreauto
 - imx6solosabreauto -> imx6qdlsabreauto

So now, the 8 boards are covered by 2 machine files. This drastically
reduces the build time and allow for a better user experience as we
can use the same image to test different boards.

In summary an image built for imx6qdlsabresd or imx6qdlsabreauto is
capable of run on a its respective board which contains a i.MX6
QuadPlus, Quad, Dual, DualLite or Solo SoC removing the need of a
specific image for each SoC type.

On top of the official 2017.07 release, following patches are
included:

801fd44563 mx6sabreauto: Make Ethernet functional again
8ccb1970b8 wandboard: Set fdt based on board_rev and board_name
e6605743e5 mx6sabresd: Enable video interfaces in bootargs
e50a2475d4 mx6sabresd: Use LDO dtb file until LDO bypass support is added
b1a4715311 mx6slevk: Use LDO dtb file until LDO bypass support is added
957409876b imx: cx9020: try pxe boot, if no vmlinuz on mmc
3608315bf1 imx: cx9020: use fdt_addr_r and ramdisk_addr_r
9a1c960516 mx6sabreauto: Add Falcon mode support
3a279e5fe8 warp: Use PARTUUID to specify the rootfs location
0f9a6703e7 embestmx6boards: Use PARTUUID to specify the rootfs location
c877510614 mx6cuboxi: Use PARTUUID to specify the rootfs location
0ada2d6caf wandboard: Use PARTUUID to specify the rootfs location
eee442362c mx6sabre: Use PARTUUID to specify the rootfs location
80a56615fa mx6sabreauto: Do not enable WEIM by default
321339efd7 imx: reorganize IMX code as other SOCs
1567ce3edc mmc: fsl_esdhc: drop CONFIG_SYS_FSL_ESDHC_FORCE_VSELECT
40294f880d dm: mmc: fsl_esdhc: handle vqmmc supply
0378edcd02 mmc: fsl_esdhc: introduce vs18_enable for 1.8V fix I/O
3657cae890 mmc: fsl_esdhc: correct type of wp_enable
45103e1030 imx6_spl: Add u-boot-dtb.img for SPL payload
61131fa4b5 mx6sabreauto: Update to SPL only mode
07a667be9b mx6qsabreauto: Add SPL support
4506c859ee mx6cuboxi: Add support for sata
a5c5962327 mx7dsabresd: Set VLD04 output to 2.8V in PMIC initialization.
4590f11b61 mx6: soc: Move mxs_dma_init() into the mxs nand driver
10d185960e net: fec_mxc: fix PHY initialization bug with CONFIG_DM_ETH
b2d4bf303e icorem6_rqs: Rename icorem6_rqs config file
af34708e1e dt-bindings: Document the Broadcom STB wake-up timer node
3e92667cfe serial: mxc: Add debug uart support
4e2b31a5c5 serial: mxc: Code cleanup
27835dae1a serial: mxc: Move common baud gen into _mxc_serial_setbrg
1ca9fe11fd serial: mxc: Move common init into _mxc_serial_init
14ac9d06be serial: mxc: Move cr1 and cr2 write to mxc_serial_setbrg
fdd1f0debc serial: mxc: Use RFDIV in dm-code
fd008b0569 serial: mxc: Add common mxc_uart reg space
2fd7878124 imx: mx6ull: fix USB bmode for i.MX 6UL and 6ULL
5c72de6152 ot1200: enable CONFIG_IMX_THERMAL for detailed thermal information
8e38f54c56 mx6sabresd: Fix guard file symbol
3320a872b0 wandboard: Remove unnecessary delay
d5ae3ce6dd cm_fx6: Remove SPL entry from CONFIG_SYS_EXTRA_OPTIONS
1325b822da cgtqmx6eval: Remove SPL entry from CONFIG_SYS_EXTRA_OPTIONS
844365a5a0 mx6slevk_spl: Remove SPL entry from CONFIG_SYS_EXTRA_OPTIONS
ff9e6d62ed mx6sabresd: Remove SPL entry from CONFIG_SYS_EXTRA_OPTIONS

Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Acked-by: Daiane Angolini <daiane.angolini@nxp.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>

1 files changed, 0 insertions, 17 deletions

diff --git a/conf/machine/imx6qsabresd.conf b/conf/machine/imx6qsabresd.conf
deleted file mode 100644
index ea9119a9..00000000
--- a/conf/machine/imx6qsabresd.conf
+++ /dev/null
@@ -1,17 +0,0 @@
-#@TYPE: Machine
-#@NAME: NXP i.MX6Q SABRE Smart Device
-#@SOC: i.MX6Q
-#@DESCRIPTION: Machine configuration for NXP i.MX6Q SABRE Smart Device
-#@MAINTAINER: Otavio Salvador <otavio@ossystems.com.br>
-
-MACHINEOVERRIDES =. "mx6:mx6q:"
-
-require conf/machine/include/imx6sabresd-common.inc
-
-KERNEL_DEVICETREE = "imx6q-sabresd.dtb imx6q-sabresd-ldo.dtb imx6q-sabresd-hdcp.dtb \
-                     imx6q-sabresd-enetirq.dtb imx6q-sabresd-btwifi.dtb"
-
-UBOOT_CONFIG ??= "sd"
-UBOOT_CONFIG[sd] = "mx6qsabresd_config,sdcard"
-UBOOT_CONFIG[sata] = "mx6qsabresd_sata_config"
-UBOOT_CONFIG[mfgtool] = "mx6qsabresd_config"