From 454b16a0b9734bf9908d64e5a6fdca0023df474b Mon Sep 17 00:00:00 2001 From: Alejandro del Castillo Date: Fri, 10 Jun 2016 10:58:28 -0500 Subject: salt: upgrade to 2016.3 * Update conffiles * Add PKGCONFIG options for zeromq and TCP transports. Signed-off-by: Alejandro del Castillo Signed-off-by: Bruce Ashfield --- meta-openstack/recipes-support/salt/files/master | 541 ++++++++++++++++++----- 1 file changed, 421 insertions(+), 120 deletions(-) (limited to 'meta-openstack/recipes-support/salt/files/master') diff --git a/meta-openstack/recipes-support/salt/files/master b/meta-openstack/recipes-support/salt/files/master index 8129a4f..821f5fc 100644 --- a/meta-openstack/recipes-support/salt/files/master +++ b/meta-openstack/recipes-support/salt/files/master @@ -1,125 +1,235 @@ ##### Primary configuration settings ##### ########################################## -# This configuration file is used to manage the behavior of the Salt Master -# Values that are commented out but have no space after the comment are -# defaults that need not be set in the config. If there is a space after the -# comment that the value is presented as an example and is not the default. +# This configuration file is used to manage the behavior of the Salt Master. +# Values that are commented out but have an empty line after the comment are +# defaults that do not need to be set in the config. If there is no blank line +# after the comment then the value is presented as an example and is not the +# default. # Per default, the master will automatically include all config files # from master.d/*.conf (master.d is a directory in the same directory -# as the main master config file) +# as the main master config file). #default_include: master.d/*.conf -# The address of the interface to bind to +# The address of the interface to bind to: #interface: 0.0.0.0 # Whether the master should listen for IPv6 connections. If this is set to True, -# the interface option must be adjusted too (for example: "interface: '::'") +# the interface option must be adjusted, too. (For example: "interface: '::'") #ipv6: False -# The tcp port used by the publisher +# The tcp port used by the publisher: #publish_port: 4505 -# The user to run the salt-master as. Salt will update all permissions to -# allow the specified user to run the master. If the modified files cause -# conflicts set verify_env to False. +# The user under which the salt master will run. Salt will update all +# permissions to allow the specified user to run the master. The exception is +# the job cache, which must be deleted if this user is changed. If the +# modified files cause conflicts, set verify_env to False. #user: root -# Max open files -# Each minion connecting to the master uses AT LEAST one file descriptor, the -# master subscription connection. If enough minions connect you might start -# seeing on the console(and then salt-master crashes): -# Too many open files (tcp_listener.cpp:335) -# Aborted (core dumped) -# -# By default this value will be the one of `ulimit -Hn`, ie, the hard limit for -# max open files. -# -# If you wish to set a different value than the default one, uncomment and -# configure this setting. Remember that this value CANNOT be higher than the -# hard limit. Raising the hard limit depends on your OS and/or distribution, -# a good way to find the limit is to search the internet for(for example): -# raise max open files hard limit debian -# -#max_open_files: 100000 - -# The number of worker threads to start, these threads are used to manage -# return calls made from minions to the master, if the master seems to be -# running slowly, increase the number of threads -#worker_threads: 5 - # The port used by the communication interface. The ret (return) port is the -# interface used for the file server, authentication, job returnes, etc. +# interface used for the file server, authentication, job returns, etc. #ret_port: 4506 -# Specify the location of the daemon process ID file +# Specify the location of the daemon process ID file: #pidfile: /var/run/salt-master.pid # The root directory prepended to these options: pki_dir, cachedir, -# sock_dir, log_file, autosign_file, extension_modules, key_logfile, pidfile. +# sock_dir, log_file, autosign_file, autoreject_file, extension_modules, +# key_logfile, pidfile: #root_dir: / -# Directory used to store public key data +# Directory used to store public key data: #pki_dir: /etc/salt/pki/master -# Directory to store job and cache data +# Directory to store job and cache data: +# This directory may contain sensitive data and should be protected accordingly. +# #cachedir: /var/cache/salt/master -# Verify and set permissions on configuration directories at startup +# Directory for custom modules. This directory can contain subdirectories for +# each of Salt's module types such as "runners", "output", "wheel", "modules", +# "states", "returners", etc. +#extension_modules: + +# Directory for custom modules. This directory can contain subdirectories for +# each of Salt's module types such as "runners", "output", "wheel", "modules", +# "states", "returners", etc. +# Like 'extension_modules' but can take an array of paths +#module_dirs: +# - /var/cache/salt/minion/extmods + +# Verify and set permissions on configuration directories at startup: #verify_env: True -# Set the number of hours to keep old job information in the job cache +# Set the number of hours to keep old job information in the job cache: #keep_jobs: 24 -# Set the default timeout for the salt command and api, the default is 5 -# seconds +# Set the default timeout for the salt command and api. The default is 5 +# seconds. #timeout: 5 -# The loop_interval option controls the seconds for the master's maintinance +# The loop_interval option controls the seconds for the master's maintenance # process check cycle. This process updates file server backends, cleans the # job cache and executes the scheduler. #loop_interval: 60 -# Set the default outputter used by the salt command. The default is "nested" +# Set the default outputter used by the salt command. The default is "nested". #output: nested -# By default output is colored, to disable colored output set the color value -# to False +# Return minions that timeout when running commands like test.ping +#show_timeout: True + +# By default, output is colored. To disable colored output, set the color value +# to False. #color: True -# Set the directory used to hold unix sockets +# Do not strip off the colored output from nested results and state outputs +# (true by default). +# strip_colors: False + +# Set the directory used to hold unix sockets: #sock_dir: /var/run/salt/master # The master can take a while to start up when lspci and/or dmidecode is used # to populate the grains for the master. Enable if you want to see GPU hardware # data for your master. -# # enable_gpu_grains: False -# The master maintains a job cache, while this is a great addition it can be +# The master maintains a job cache. While this is a great addition, it can be # a burden on the master for larger deployments (over 5000 minions). # Disabling the job cache will make previously executed jobs unavailable to # the jobs system and is not generally recommended. -# #job_cache: True # Cache minion grains and pillar data in the cachedir. #minion_data_cache: True +# Store all returns in the given returner. +# Setting this option requires that any returner-specific configuration also +# be set. See various returners in salt/returners for details on required +# configuration values. (See also, event_return_queue below.) +# +#event_return: mysql + +# On busy systems, enabling event_returns can cause a considerable load on +# the storage system for returners. Events can be queued on the master and +# stored in a batched fashion using a single transaction for multiple events. +# By default, events are not queued. +#event_return_queue: 0 + +# Only events returns matching tags in a whitelist +# event_return_whitelist: +# - salt/master/a_tag +# - salt/master/another_tag + +# Store all event returns _except_ the tags in a blacklist +# event_return_blacklist: +# - salt/master/not_this_tag +# - salt/master/or_this_one + +# Passing very large events can cause the minion to consume large amounts of +# memory. This value tunes the maximum size of a message allowed onto the +# master event bus. The value is expressed in bytes. +#max_event_size: 1048576 + +# By default, the master AES key rotates every 24 hours. The next command +# following a key rotation will trigger a key refresh from the minion which may +# result in minions which do not respond to the first command after a key refresh. +# +# To tell the master to ping all minions immediately after an AES key refresh, set +# ping_on_rotate to True. This should mitigate the issue where a minion does not +# appear to initially respond after a key is rotated. +# +# Note that ping_on_rotate may cause high load on the master immediately after +# the key rotation event as minions reconnect. Consider this carefully if this +# salt master is managing a large number of minions. +# +# If disabled, it is recommended to handle this event by listening for the +# 'aes_key_rotate' event with the 'key' tag and acting appropriately. +# ping_on_rotate: False + +# By default, the master deletes its cache of minion data when the key for that +# minion is removed. To preserve the cache after key deletion, set +# 'preserve_minion_cache' to True. +# +# WARNING: This may have security implications if compromised minions auth with +# a previous deleted minion ID. +#preserve_minion_cache: False + +# If max_minions is used in large installations, the master might experience +# high-load situations because of having to check the number of connected +# minions for every authentication. This cache provides the minion-ids of +# all connected minions to all MWorker-processes and greatly improves the +# performance of max_minions. +# con_cache: False + # The master can include configuration from other files. To enable this, # pass a list of paths to this option. The paths can be either relative or # absolute; if relative, they are considered to be relative to the directory # the main master configuration file lives in (this file). Paths can make use # of shell-style globbing. If no files are matched by a path passed to this -# option then the master will log a warning message. -# +# option, then the master will log a warning message. # # Include a config file from some other path: -#include: /etc/salt/extra_config +# include: /etc/salt/extra_config # # Include config from several files and directories: -#include: -# - /etc/salt/extra_config +# include: +# - /etc/salt/extra_config + + +##### Large-scale tuning settings ##### +########################################## +# Max open files +# +# Each minion connecting to the master uses AT LEAST one file descriptor, the +# master subscription connection. If enough minions connect you might start +# seeing on the console (and then salt-master crashes): +# Too many open files (tcp_listener.cpp:335) +# Aborted (core dumped) +# +# By default this value will be the one of `ulimit -Hn`, ie, the hard limit for +# max open files. +# +# If you wish to set a different value than the default one, uncomment and +# configure this setting. Remember that this value CANNOT be higher than the +# hard limit. Raising the hard limit depends on your OS and/or distribution, +# a good way to find the limit is to search the internet. For example: +# raise max open files hard limit debian +# +#max_open_files: 100000 + +# The number of worker threads to start. These threads are used to manage +# return calls made from minions to the master. If the master seems to be +# running slowly, increase the number of threads. This setting can not be +# set lower than 3. +#worker_threads: 5 + +# Set the ZeroMQ high water marks +# http://api.zeromq.org/3-2:zmq-setsockopt + +# The publisher interface ZeroMQPubServerChannel +#pub_hwm: 1000 + +# These two ZMQ HWM settings, salt_event_pub_hwm and event_publisher_pub_hwm +# are significant for masters with thousands of minions. When these are +# insufficiently high it will manifest in random responses missing in the CLI +# and even missing from the job cache. Masters that have fast CPUs and many +# cores with appropriate worker_threads will not need these set as high. + +# On deployment with 8,000 minions, 2.4GHz CPUs, 24 cores, 32GiB memory has +# these settings: +# +# salt_event_pub_hwm: 128000 +# event_publisher_pub_hwm: 64000 + +# ZMQ high-water-mark for SaltEvent pub socket +#salt_event_pub_hwm: 20000 + +# ZMQ high-water-mark for EventPublisher pub socket +#event_publisher_pub_hwm: 10000 + ##### Security settings ##### @@ -134,53 +244,68 @@ # public keys from the minions. Note that this is insecure. #auto_accept: False -# If the autosign_file is specified only incoming keys specified in -# the autosign_file will be automatically accepted. This is insecure. -# Regular expressions as well as globing lines are supported. +# Time in minutes that a incoming public key with a matching name found in +# pki_dir/minion_autosign/keyid is automatically accepted. Expired autosign keys +# are removed when the master checks the minion_autosign directory. +# 0 equals no timeout +# autosign_timeout: 120 + +# If the autosign_file is specified, incoming keys specified in the +# autosign_file will be automatically accepted. This is insecure. Regular +# expressions as well as globing lines are supported. #autosign_file: /etc/salt/autosign.conf -# Enable permissive access to the salt keys. This allows you to run the +# Works like autosign_file, but instead allows you to specify minion IDs for +# which keys will automatically be rejected. Will override both membership in +# the autosign_file and the auto_accept setting. +#autoreject_file: /etc/salt/autoreject.conf + +# Enable permissive access to the salt keys. This allows you to run the # master or minion as root, but have a non-root group be given access to -# your pki_dir. To make the access explicit, root must belong to the group -# you've given access to. This is potentially quite insecure. -# If an autosign_file is specified, enabling permissive_pki_access will allow group access -# to that specific file. +# your pki_dir. To make the access explicit, root must belong to the group +# you've given access to. This is potentially quite insecure. If an autosign_file +# is specified, enabling permissive_pki_access will allow group access to that +# specific file. #permissive_pki_access: False # Allow users on the master access to execute specific commands on minions. # This setting should be treated with care since it opens up execution # capabilities to non root users. By default this capability is completely # disabled. -# -#client_acl: +#pulisher_acl: # larry: # - test.ping # - network.* # - # Blacklist any of the following users or modules # # This example would blacklist all non sudo users, including root from # running any commands. It would also blacklist any use of the "cmd" -# module. -# This is completely disabled by default. +# module. This is completely disabled by default. # -#client_acl_blacklist: +#publisher_acl_blacklist: # users: # - root # - '^(?!sudo_).*$' # all non sudo users # modules: # - cmd +# +# WARNING: client_acl and client_acl_blacklist options are deprecated and will +# be removed in the future releases. Use publisher_acl and +# publisher_acl_blacklist instead. + +# Enforce publisher_acl & publisher_acl_blacklist when users have sudo +# access to the salt command. +# +#sudo_acl: False # The external auth system uses the Salt auth modules to authenticate and # validate users to access areas of the Salt system. -# #external_auth: # pam: # fred: # - test.* # - # Time (in seconds) for a newly generated token to live. Default: 12 hours #token_expire: 43200 @@ -188,6 +313,10 @@ # security purposes. #file_recv: False +# Set a hard-limit on the size of the files that can be pushed to the master. +# It will be interpreted as megabytes. Default: 100 +#file_recv_max_size: 100 + # Signature verification on messages published from the master. # This causes the master to cryptographically sign all messages published to its event # bus, and minions then verify that signature before acting on the message. @@ -199,20 +328,30 @@ # no signature, it will still be accepted, and a warning message will be logged. # Conversely, if sign_pub_messages is False, but a minion receives a signed # message it will be accepted, the signature will not be checked, and a warning message -# will be logged. This behavior will go away in Salt 0.17.6 (or Hydrogen RC1, whichever -# comes first) and these two situations will cause minion to throw an exception and -# drop the message. -# +# will be logged. This behavior went away in Salt 2014.1.0 and these two situations +# will cause minion to throw an exception and drop the message. # sign_pub_messages: False +##### Salt-SSH Configuration ##### +########################################## + +# Pass in an alternative location for the salt-ssh roster file +#roster_file: /etc/salt/roster + +# Pass in minion option overrides that will be inserted into the SHIM for +# salt-ssh calls. The local minion config is not used for salt-ssh. Can be +# overridden on a per-minion basis in the roster (`minion_opts`) +#ssh_minion_opts: +# gpg_keydir: /root/gpg + ##### Master Module Management ##### ########################################## -# Manage how master side modules are loaded +# Manage how master side modules are loaded. -# Add any additional locations to look for master runners +# Add any additional locations to look for master runners: #runner_dirs: [] -# Enable Cython for master side modules +# Enable Cython for master side modules: #cython_enable: False @@ -226,6 +365,7 @@ # The master_tops option replaces the external_nodes option by creating # a plugable system for the generation of external top data. The external_nodes # option is deprecated by the master_tops option. +# # To gain the capabilities of the classic external_nodes system, use the # following configuration: # master_tops: @@ -242,6 +382,19 @@ # The renderer to use on the minions to render the state data #renderer: yaml_jinja +# The Jinja renderer can strip extra carriage returns and whitespace +# See http://jinja.pocoo.org/docs/api/#high-level-api +# +# If this is set to True the first newline after a Jinja block is removed +# (block, not variable tag!). Defaults to False, corresponds to the Jinja +# environment init variable "trim_blocks". +#jinja_trim_blocks: False +# +# If this is set to True leading spaces and tabs are stripped from the start +# of a line to a block. Defaults to False, corresponds to the Jinja +# environment init variable "lstrip_blocks". +#jinja_lstrip_blocks: False + # The failhard option tells the minions to stop immediately after the first # failure detected in the state execution, defaults to False #failhard: False @@ -256,8 +409,22 @@ # output for each changed state if set to 'full', but if set to 'terse' # the output will be shortened to a single line. If set to 'mixed', the output # will be terse unless a state failed, in which case that output will be full. +# If set to 'changes', the output will be full unless the state didn't change. #state_output: full +# Automatically aggregate all states that have support for mod_aggregate by +# setting to 'True'. Or pass a list of state module names to automatically +# aggregate just those types. +# +# state_aggregate: +# - pkg +# +#state_aggregate: False + +# Send progress events as each function in a state run completes execution +# by setting to 'True'. Progress events are in the format +# 'salt/job//prog//'. +#state_events: False ##### File Server settings ##### ########################################## @@ -279,14 +446,34 @@ # prod: # - /srv/salt/prod/services # - /srv/salt/prod/states - +# #file_roots: # base: # - /srv/salt +# + +# When using multiple environments, each with their own top file, the +# default behaviour is an unordered merge. To prevent top files from +# being merged together and instead to only use the top file from the +# requested environment, set this value to 'same'. +#top_file_merging_strategy: merge + +# To specify the order in which environments are merged, set the ordering +# in the env_order option. Given a conflict, the last matching value will +# win. +#env_order: ['base', 'dev', 'prod'] + +# If top_file_merging_strategy is set to 'same' and an environment does not +# contain a top file, the top file in the environment specified by default_top +# will be used instead. +#default_top: base # The hash_type is the hash to use when discovering the hash of a file on # the master server. The default is md5, but sha1, sha224, sha256, sha384 # and sha512 are also supported. +# +# Prior to changing this value, the master should be stopped and all Salt +# caches should be cleared. #hash_type: md5 # The buffer size in the file server can be adjusted here: @@ -298,7 +485,6 @@ # For example, if you manage your custom modules and states in subversion # and don't want all the '.svn' folders and content synced to your minions, # you could set this to '/\.svn($|/)'. By default nothing is ignored. -# #file_ignore_regex: # - '/\.svn($|/)' # - '/\.git($|/)' @@ -307,58 +493,83 @@ # path before syncing the modules and states to the minions. This is similar # to file_ignore_regex above, but works on globs instead of regex. By default # nothing is ignored. -# # file_ignore_glob: # - '*.pyc' # - '*/somefolder/*.bak' # - '*.swp' # File Server Backend +# # Salt supports a modular fileserver backend system, this system allows # the salt master to link directly to third party systems to gather and # manage the files available to minions. Multiple backends can be # configured and will be searched for the requested file in the order in which # they are defined here. The default setting only enables the standard backend # "roots" which uses the "file_roots" option. -# #fileserver_backend: # - roots # # To use multiple backends list them in the order they are searched: -# #fileserver_backend: # - git # - roots # +# Uncomment the line below if you do not want the file_server to follow +# symlinks when walking the filesystem tree. This is set to True +# by default. Currently this only applies to the default roots +# fileserver_backend. +#fileserver_followsymlinks: False +# +# Uncomment the line below if you do not want symlinks to be +# treated as the files they are pointing to. By default this is set to +# False. By uncommenting the line below, any detected symlink while listing +# files on the Master will not be returned to the Minion. +#fileserver_ignoresymlinks: True +# # By default, the Salt fileserver recurses fully into all defined environments # to attempt to find files. To limit this behavior so that the fileserver only # traverses directories with SLS files and special Salt directories like _modules, # enable the option below. This might be useful for installations where a file root # has a very large number of files and performance is impacted. Default is False. -# # fileserver_limit_traversal: False # -# Git fileserver backend configuration +# The fileserver can fire events off every time the fileserver is updated, +# these are disabled by default, but can be easily turned on by setting this +# flag to True +#fileserver_events: False + +# Git File Server Backend Configuration +# +# Gitfs can be provided by one of two python modules: GitPython or pygit2. If +# using pygit2, both libgit2 and git must also be installed. +#gitfs_provider: gitpython +# # When using the git fileserver backend at least one git remote needs to be # defined. The user running the salt master will need read access to the repo. # -#gitfs_remotes: -# - git://github.com/saltstack/salt-states.git -# - file:///var/git/saltmaster -# # The repos will be searched in order to find the file requested by a client # and the first repo to have the file will return it. # When using the git backend branches and tags are translated into salt # environments. # Note: file:// repos will be treated as a remote, so refs you want used must # exist in that repo as *local* refs. +#gitfs_remotes: +# - git://github.com/saltstack/salt-states.git +# - file:///var/git/saltmaster +# +# The gitfs_ssl_verify option specifies whether to ignore ssl certificate +# errors when contacting the gitfs backend. You might want to set this to +# false if you're using a git backend that uses a self-signed certificate but +# keep in mind that setting this flag to anything other than the default of True +# is a security concern, you may want to try using the ssh transport. +#gitfs_ssl_verify: True # # The gitfs_root option gives the ability to serve files from a subdirectory # within the repository. The path is defined relative to the root of the # repository and defaults to the repository root. #gitfs_root: somefolder/otherfolder - - +# +# ##### Pillar settings ##### ########################################## # Salt Pillars allow for the building of global data that can be made selectively @@ -366,28 +577,59 @@ # Pillar is laid out in the same fashion as the file server, with environments, # a top file and sls files. However, pillar data does not need to be in the # highstate format, and is generally just key/value pairs. - #pillar_roots: # base: # - /srv/pillar - +# #ext_pillar: # - hiera: /etc/hiera.yaml # - cmd_yaml: cat /etc/salt/yaml +# The ext_pillar_first option allows for external pillar sources to populate +# before file system pillar. This allows for targeting file system pillar from +# ext_pillar. +#ext_pillar_first: False + +# The pillar_gitfs_ssl_verify option specifies whether to ignore ssl certificate +# errors when contacting the pillar gitfs backend. You might want to set this to +# false if you're using a git backend that uses a self-signed certificate but +# keep in mind that setting this flag to anything other than the default of True +# is a security concern, you may want to try using the ssh transport. +#pillar_gitfs_ssl_verify: True + # The pillar_opts option adds the master configuration file data to a dict in # the pillar called "master". This is used to set simple configurations in the # master config file that can then be used on minions. -#pillar_opts: True +#pillar_opts: False + +# The pillar_safe_render_error option prevents the master from passing pillar +# render errors to the minion. This is set on by default because the error could +# contain templating data which would give that minion information it shouldn't +# have, like a password! When set true the error message will only show: +# Rendering SLS 'my.sls' failed. Please see master log for details. +#pillar_safe_render_error: True + +# The pillar_source_merging_strategy option allows you to configure merging strategy +# between different sources. It accepts four values: recurse, aggregate, overwrite, +# or smart. Recurse will merge recursively mapping of data. Aggregate instructs +# aggregation of elements between sources that use the #!yamlex renderer. Overwrite +# will verwrite elements according the order in which they are processed. This is +# behavior of the 2014.1 branch and earlier. Smart guesses the best strategy based +# on the "renderer" setting and is the default value. +#pillar_source_merging_strategy: smart + +# Recursively merge lists by aggregating them instead of replacing them. +#pillar_merge_lists: False ##### Syndic settings ##### ########################################## # The Salt syndic is used to pass commands through a master from a higher -# master. Using the syndic is simple, if this is a master that will have -# syndic servers(s) below it set the "order_masters" setting to True, if this -# is a master that will be running a syndic daemon for passthrough the -# "syndic_master" setting needs to be set to the location of the master server +# master. Using the syndic is simple. If this is a master that will have +# syndic servers(s) below it, then set the "order_masters" setting to True. +# +# If this is a master that will be running a syndic daemon for passthrough, then +# the "syndic_master" setting needs to be set to the location of the master server # to receive commands from. # Set the order_masters setting to True if this master will command lower @@ -398,15 +640,16 @@ # this master where to receive commands from. #syndic_master: masterofmaster -# This is the 'ret_port' of the MasterOfMaster +# This is the 'ret_port' of the MasterOfMaster: #syndic_master_port: 4506 -# PID file of the syndic daemon +# PID file of the syndic daemon: #syndic_pidfile: /var/run/salt-syndic.pid -# LOG file of the syndic daemon +# LOG file of the syndic daemon: #syndic_log_file: syndic.log + ##### Peer Publish settings ##### ########################################## # Salt minions can send commands to other minions, but only if the minion is @@ -418,14 +661,12 @@ # of regular expressions to match functions. The following will allow the # minion authenticated as foo.example.com to execute functions from the test # and pkg modules. -# #peer: # foo.example.com: # - test.* # - pkg.* # # This will allow all minions to execute all commands: -# #peer: # .*: # - .* @@ -440,16 +681,34 @@ # # All peer runner support is turned off by default and must be enabled before # using. This will enable all peer runners for all minions: -# #peer_run: # .*: # - .* # # To enable just the manage.up runner for the minion foo.example.com: -# #peer_run: # foo.example.com: # - manage.up +# +# +##### Mine settings ##### +##################################### +# Restrict mine.get access from minions. By default any minion has a full access +# to get all mine data from master cache. In acl definion below, only pcre matches +# are allowed. +# mine_get: +# .*: +# - .* +# +# The example below enables minion foo.example.com to get 'network.interfaces' mine +# data only, minions web* to get all network.* and disk.* mine data and all other +# minions won't get any mine data. +# mine_get: +# foo.example.com: +# - network.interfaces +# web.*: +# - network.* +# - disk.* ##### Logging settings ##### @@ -468,10 +727,15 @@ # The level of messages to send to the console. # One of 'garbage', 'trace', 'debug', info', 'warning', 'error', 'critical'. +# +# The following log levels are considered INSECURE and may log sensitive data: +# ['garbage', 'trace', 'debug'] +# #log_level: warning # The level of messages to send to the log file. # One of 'garbage', 'trace', 'debug', info', 'warning', 'error', 'critical'. +# If using 'log_granular_levels' this must be set to the highest desired level. #log_level_logfile: warning # The date and time format used in log messages. Allowed date/time formating @@ -481,24 +745,37 @@ # The format of the console logging messages. Allowed formatting options can # be seen here: http://docs.python.org/library/logging.html#logrecord-attributes +# +# Console log colors are specified by these additional formatters: +# +# %(colorlevel)s +# %(colorname)s +# %(colorprocess)s +# %(colormsg)s +# +# Since it is desirable to include the surrounding brackets, '[' and ']', in +# the coloring of the messages, these color formatters also include padding as +# well. Color LogRecord attributes are only available for console logging. +# +#log_fmt_console: '%(colorlevel)s %(colormsg)s' #log_fmt_console: '[%(levelname)-8s] %(message)s' +# #log_fmt_logfile: '%(asctime)s,%(msecs)03.0f [%(name)-17s][%(levelname)-8s] %(message)s' # This can be used to control logging levels more specificically. This # example sets the main salt library at the 'warning' level, but sets # 'salt.modules' to log at the 'debug' level: # log_granular_levels: -# 'salt': 'warning', +# 'salt': 'warning' # 'salt.modules': 'debug' # #log_granular_levels: {} -##### Node Groups ##### +##### Node Groups ###### ########################################## -# Node groups allow for logical groupings of minion nodes. -# A group consists of a group name and a compound target. -# +# Node groups allow for logical groupings of minion nodes. A group consists of a group +# name and a compound target. #nodegroups: # group1: 'L@foo.domain.com,bar.domain.com,baz.domain.com and bl*.domain.com' # group2: 'G@os:Debian and foo.domain.com' @@ -507,19 +784,43 @@ ##### Range Cluster settings ##### ########################################## # The range server (and optional port) that serves your cluster information -# https://github.com/grierj/range/wiki/Introduction-to-Range-with-YAML-files +# https://github.com/ytoolshed/range/wiki/%22yamlfile%22-module-file-spec # #range_server: range:80 -##### Windows Software Repo settings ##### -############################################## -# Location of the repo on the master -#win_repo: '/srv/salt/win/repo' +##### Windows Software Repo settings ##### +########################################### +# Location of the repo on the master: +#winrepo_dir_ng: '/srv/salt/win/repo-ng' +# +# List of git repositories to include with the local repo: +#winrepo_remotes_ng: +# - 'https://github.com/saltstack/salt-winrepo-ng.git' -# Location of the master's repo cache file -#win_repo_mastercachefile: '/srv/salt/win/repo/winrepo.p' -# List of git repositories to include with the local repo -#win_gitrepos: +##### Windows Software Repo settings - Pre 2015.8 ##### +######################################################## +# Legacy repo settings for pre-2015.8 Windows minions. +# +# Location of the repo on the master: +#winrepo_dir: '/srv/salt/win/repo' +# +# Location of the master's repo cache file: +#winrepo_mastercachefile: '/srv/salt/win/repo/winrepo.p' +# +# List of git repositories to include with the local repo: +#winrepo_remotes: # - 'https://github.com/saltstack/salt-winrepo.git' + + +##### Returner settings ###### +############################################ +# Which returner(s) will be used for minion's result: +#return: mysql + + +###### Miscellaneous settings ###### +############################################ +# Default match type for filtering events tags: startswith, endswith, find, regex, fnmatch +#event_match_type: startswith -- cgit v1.2.3-54-g00ecf