15 files changed, 130 insertions, 319 deletions

diff --git a/meta-fsl-extras/recipes/u-boot/u-boot-script-toradex.bb b/meta-fsl-extras/recipes/u-boot/u-boot-script-toradex.bb
index ac70843..4a0d646 100644
--- a/meta-fsl-extras/recipes/u-boot/u-boot-script-toradex.bb
+++ b/meta-fsl-extras/recipes/u-boot/u-boot-script-toradex.bb
@@ -1,6 +1,6 @@
 ############################################################################
 ##
-## Copyright (C) 2016 The Qt Company Ltd.
+## Copyright (C) 2017 The Qt Company Ltd.
 ## Contact: https://www.qt.io/licensing/
 ##
 ## This file is part of the Boot to Qt meta layer.
@@ -31,7 +31,7 @@ LICENSE = "The-Qt-Company-DCLA-2.1"
 LIC_FILES_CHKSUM = "file://${QT_LICENSE};md5=80e06902b5f0e94ad0a78ee4f7fcb74b"
 DEPENDS = "u-boot-mkimage-native"
 
-PV = "v2.6"
+PV = "2.7"
 
 SRC_URI = " \
     file://fwd_mmc.scr \
@@ -59,8 +59,8 @@ addtask mkimage after do_compile before do_install
 do_deploy () {
     install -d ${DEPLOYDIR}/${MACHINE}
     install -m 0644 -t ${DEPLOYDIR} ${S}/*.img
-    ln -s ../flash_blk.img ${DEPLOYDIR}/${MACHINE}/
-    ln -s ../flash_eth.img ${DEPLOYDIR}/${MACHINE}/
+    ln -fs ../flash_blk.img ${DEPLOYDIR}/${MACHINE}/
+    ln -fs ../flash_eth.img ${DEPLOYDIR}/${MACHINE}/
 }
 
 addtask deploy after do_install before do_build
diff --git a/meta-fsl-extras/recipes/u-boot/u-boot-script-toradex/apalis-imx6/0001-Update-only-u-boot.patch b/meta-fsl-extras/recipes/u-boot/u-boot-script-toradex/apalis-imx6/0001-Update-only-u-boot.patch
deleted file mode 100644
index 5c62eb1..0000000
--- a/meta-fsl-extras/recipes/u-boot/u-boot-script-toradex/apalis-imx6/0001-Update-only-u-boot.patch
+++ /dev/null
@@ -1,60 +0,0 @@
-From 262b1dcc5f886ceb1944c8db3c1072c98d45a56e Mon Sep 17 00:00:00 2001
-From: Samuli Piippo <samuli.piippo@qt.io>
-Date: Wed, 14 Sep 2016 10:11:32 +0300
-Subject: [PATCH] Update only u-boot
-
----
- flash_blk.scr        | 8 ++++----
- flash_eth.scr        | 8 ++++----
- 2 files changed, 8 insertions(+), 8 deletions(-)
-
-diff --git a/flash_blk.scr b/flash_blk.scr
-index 800383c..398c4de 100644
---- a/flash_blk.scr
-+++ b/flash_blk.scr
-@@ -30,16 +30,16 @@ setenv update_2 'load ${interface} ${drive}:1 ${loadaddr} ${board_name}/boot.vfa
- #do it in chunks of 64M to fit into DDR RAM of the smallest module
- setenv update_3 'setenv filesize 4000000; setenv filepos 0; setenv blkstart a000; while test ${filesize} -eq "4000000"; do run cp_file_chunk; run set_nextpos; done; true'
- 
--setenv echo_migrate echo "successfully updated U-Boot, power-cycle and enter \"run setupdate\; run migrate\" to complete update"
--setenv echo_migrate-it echo "successfully updated U-Boot, power-cycle and enter \"run setupdate\; run migrate_it\" to complete update"
-+setenv echo_migrate echo "successfully updated U-Boot"
-+setenv echo_migrate-it echo "successfully updated U-Boot"
- setenv migrate 'run migrate_configblock; run update_latest; reset'
- setenv migrate_it 'setenv module_type -it; run migrate'
- setenv update_v2.4b1 'run check_configblock || run migrate_configblock; run migrate_uboot_old && run echo_migrate${module_type}'
- setenv update_v2.5b3 'run check_configblock || run migrate_configblock; run migrate_uboot && run echo_migrate${module_type}'
- 
- setenv update_latest 'run update_uboot; run update_1; run update_2; run update_kernel; run update_fdt; run update_3'
--setenv update_new 'updt_fuse -n && run update_latest && reset; run update_v2.5b3'
-+setenv update_new 'updt_fuse -n && run update_uboot && reset; run update_v2.5b3'
- setenv update 'mmc bootbus 0 2 0 1 && run update_new && exit; run update_v2.4b1'
- setenv update_it 'setenv module_type -it; run update'
- 
--echo 'enter "run update" or "run update_it" to update the entire module'
-+echo 'enter "run update" or "run update_it" to update the uboot'
-diff --git a/flash_eth.scr b/flash_eth.scr
-index 804c924..2f64288 100644
---- a/flash_eth.scr
-+++ b/flash_eth.scr
-@@ -31,16 +31,16 @@ setenv update_2 'tftpboot ${loadaddr} ${board_name}/boot.vfat && run set_blkcnt
- #split -a 2 -b `expr 64 \* 1024 \* 1024` --numeric-suffixes=10 root.ext3 root.ext3-
- setenv update_3 'setenv filesize 4000000; setenv filenum 10; setenv blkstart a000; while test ${filesize} -eq "4000000"; do run cp_file_chunk; run set_nextnum; done; true'
- 
--setenv echo_migrate echo "successfully updated U-Boot, power-cycle and enter \"run setupdate\; run migrate\" to complete update"
--setenv echo_migrate-it echo "successfully updated U-Boot, power-cycle and enter \"run setupdate\; run migrate_it\" to complete update"
-+setenv echo_migrate echo "successfully updated U-Boot"
-+setenv echo_migrate-it echo "successfully updated U-Boot"
- setenv migrate 'run migrate_configblock; run update_latest; reset'
- setenv migrate_it 'setenv module_type -it; run migrate'
- setenv update_v2.4b1 'run check_configblock || run migrate_configblock; run migrate_uboot_old && run echo_migrate${module_type}'
- setenv update_v2.5b3 'run check_configblock || run migrate_configblock; run migrate_uboot && run echo_migrate${module_type}'
- 
- setenv update_latest 'run update_uboot; run update_1; run update_2; run update_kernel; run update_fdt; run update_3'
--setenv update_new 'updt_fuse -n && run update_latest && reset; run update_v2.5b3'
-+setenv update_new 'updt_fuse -n && run update_uboot && reset; run update_v2.5b3'
- setenv update 'mmc bootbus 0 2 0 1 && run update_new && exit; run update_v2.4b1'
- setenv update_it 'setenv module_type -it; run update'
- 
--echo 'enter "run update" or "run update_it" to update the entire module'
-+echo 'enter "run update" or "run update_it" to update the uboot'
diff --git a/meta-fsl-extras/recipes/u-boot/u-boot-script-toradex/apalis-imx6/flash_blk.scr b/meta-fsl-extras/recipes/u-boot/u-boot-script-toradex/apalis-imx6/flash_blk.scr
deleted file mode 100644
index 398c4de..0000000
--- a/meta-fsl-extras/recipes/u-boot/u-boot-script-toradex/apalis-imx6/flash_blk.scr
+++ /dev/null
@@ -1,45 +0,0 @@
-test -n ${interface} || setenv interface mmc
-test -n ${drive} || setenv drive 1
-
-setenv set_blkcnt 'setexpr blkcnt ${filesize} + 0x1ff && setexpr blkcnt ${blkcnt} / 0x200'
-setenv set_nextpos 'setexpr filepos ${filepos} + ${filesize}; setexpr blkstart ${blkstart} + ${blkcnt}'
-
-setenv check_1 'setenv conf_blk_offset 0x1fff; mmc read ${loadaddr} ${conf_blk_offset} 1'
-setenv check_2 'setenv conf_blk_offset 0xfff; mmc read ${loadaddr} ${conf_blk_offset} 1'
-setenv check_3 'setenv conf_blk_offset 0x7ff; mmc read ${loadaddr} ${conf_blk_offset} 1'
-setenv check_configblock 'setexpr toradex_oui_addr ${loadaddr} + 8; mw.l ${kernel_addr_r} 0x002d1400; mmc dev 0 1; run check_1 || run check_2 || run check_3; cmp.b ${kernel_addr_r} ${toradex_oui_addr} 3'
-
-setenv migrate_configblock 'run check_configblock; mmc dev 0 0 && mmc read ${loadaddr} 0x500 1 && cmp.b ${kernel_addr_r} ${toradex_oui_addr} 3 && mmc dev 0 1 && mmc write ${loadaddr} ${conf_blk_offset} 1'
-
-setenv migrate_uboot_old 'load ${interface} ${drive}:1 ${loadaddr} ${board_name}/u-boot.imx${module_type} && run set_blkcnt && mmc dev 0 0 && mmc write ${loadaddr} 2 ${blkcnt}'
-setenv migrate_uboot 'load ${interface} ${drive}:1 ${loadaddr} ${board_name}/u-boot.imx${module_type} && run set_blkcnt && mmc dev 0 1 && mmc write ${loadaddr} 2 ${blkcnt} && mmc bootbus 0 2 1 2 && mmc partconf 0 1 1 0'
-
-setenv cp_file_chunk 'load ${interface} ${drive}:1 ${loadaddr} ${board_name}/root.ext3 ${filesize} ${filepos}; run set_blkcnt; mmc dev 0 0 && mmc write ${loadaddr} ${blkstart} ${blkcnt}'
-
-setenv update_uboot 'load ${interface} ${drive}:1 ${loadaddr} ${board_name}/u-boot.imx${module_type} && run set_blkcnt && mmc dev 0 1 && mmc write ${loadaddr} 2 ${blkcnt} && updt_fuse && mmc bootbus 0 2 0 1 && mmc partconf 0 1 1 0 && mmc rst-function 0 1'
-setenv update_uboot_it 'setenv module_type -it; run update_uboot'
-
-setenv update_kernel 'load ${interface} ${drive}:1 ${loadaddr} ${board_name}/uImage && fatwrite mmc 0:1 ${loadaddr} uImage ${filesize}'
-
-setenv update_fdt 'load ${interface} ${drive}:1 ${loadaddr} ${board_name}/${fdt_file} && fatwrite mmc 0:1 ${loadaddr} ${fdt_file} ${filesize}'
-
-setenv update_configblock 'run check_configblock; load ${interface} ${drive}:1 ${loadaddr} ${board_name}/configblock.bin && mmc dev 0 1 && mmc write ${loadaddr} ${conf_blk_offset} 1'
-
-setenv update_1 'load ${interface} ${drive}:1 ${loadaddr} ${board_name}/mbr.bin && mmc dev 0 0 && mmc write ${loadaddr} 0x0 0x1'
-setenv update_2 'load ${interface} ${drive}:1 ${loadaddr} ${board_name}/boot.vfat && run set_blkcnt && mmc dev 0 0 && mmc write ${loadaddr} 0x2000 ${blkcnt}'
-#do it in chunks of 64M to fit into DDR RAM of the smallest module
-setenv update_3 'setenv filesize 4000000; setenv filepos 0; setenv blkstart a000; while test ${filesize} -eq "4000000"; do run cp_file_chunk; run set_nextpos; done; true'
-
-setenv echo_migrate echo "successfully updated U-Boot, power-cycle and enter \"run setupdate\; run migrate\" to complete update"
-setenv echo_migrate-it echo "successfully updated U-Boot, power-cycle and enter \"run setupdate\; run migrate_it\" to complete update"
-setenv migrate 'run migrate_configblock; run update_latest; reset'
-setenv migrate_it 'setenv module_type -it; run migrate'
-setenv update_v2.4b1 'run check_configblock || run migrate_configblock; run migrate_uboot_old && run echo_migrate${module_type}'
-setenv update_v2.5b3 'run check_configblock || run migrate_configblock; run migrate_uboot && run echo_migrate${module_type}'
-
-setenv update_latest 'run update_uboot; run update_1; run update_2; run update_kernel; run update_fdt; run update_3'
-setenv update_new 'updt_fuse -n && run update_latest && reset; run update_v2.5b3'
-setenv update 'mmc bootbus 0 2 0 1 && run update_new && exit; run update_v2.4b1'
-setenv update_it 'setenv module_type -it; run update'
-
-echo 'enter "run update" or "run update_it" to update the entire module'
diff --git a/meta-fsl-extras/recipes/u-boot/u-boot-script-toradex/apalis-imx6/flash_eth.scr b/meta-fsl-extras/recipes/u-boot/u-boot-script-toradex/apalis-imx6/flash_eth.scr
deleted file mode 100644
index 2f64288..0000000
--- a/meta-fsl-extras/recipes/u-boot/u-boot-script-toradex/apalis-imx6/flash_eth.scr
+++ /dev/null
@@ -1,46 +0,0 @@
-setenv set_blkcnt 'setexpr blkcnt ${filesize} + 0x1ff && setexpr blkcnt ${blkcnt} / 0x200'
-#workaround U-Boot counting in hex and split did in decimal
-setenv incr_decimal 'setexpr filenum ${filenum} + 1; setexpr filenrlow ${filenum} % 0x10; test ${filenrlow} -eq "a" && setexpr filenum ${filenum} + 0x6; true'
-setenv set_nextnum 'run incr_decimal; setexpr blkstart ${blkstart} + ${blkcnt}'
-
-setenv check_1 'setenv conf_blk_offset 0x1fff; mmc read ${loadaddr} ${conf_blk_offset} 1'
-setenv check_2 'setenv conf_blk_offset 0xfff; mmc read ${loadaddr} ${conf_blk_offset} 1'
-setenv check_3 'setenv conf_blk_offset 0x7ff; mmc read ${loadaddr} ${conf_blk_offset} 1'
-setenv check_configblock 'setexpr toradex_oui_addr ${loadaddr} + 8; mw.l ${kernel_addr_r} 0x002d1400; mmc dev 0 1; run check_1 || run check_2 || run check_3; cmp.b ${kernel_addr_r} ${toradex_oui_addr} 3'
-
-setenv migrate_configblock 'run check_configblock; mmc dev 0 0 && mmc read ${loadaddr} 0x500 1 && cmp.b ${kernel_addr_r} ${toradex_oui_addr} 3 && mmc dev 0 1 && mmc write ${loadaddr} ${conf_blk_offset} 1'
-
-setenv migrate_uboot_old 'tftpboot ${loadaddr} ${board_name}/u-boot.imx${module_type} && run set_blkcnt && mmc dev 0 0 && mmc write ${loadaddr} 2 ${blkcnt}'
-setenv migrate_uboot 'tftpboot ${loadaddr} ${board_name}/u-boot.imx${module_type} && run set_blkcnt && mmc dev 0 1 && mmc write ${loadaddr} 2 ${blkcnt} && mmc bootbus 0 2 1 2 && mmc partconf 0 1 1 0'
-
-setenv cp_file_chunk 'tftpboot ${loadaddr} ${board_name}/root.ext3-${filenum}; run set_blkcnt; mmc dev 0 0 && mmc write ${loadaddr} ${blkstart} ${blkcnt}'
-
-setenv update_uboot 'tftpboot ${loadaddr} ${board_name}/u-boot.imx${module_type} && run set_blkcnt && mmc dev 0 1 && mmc write ${loadaddr} 2 ${blkcnt} && updt_fuse && mmc bootbus 0 2 0 1 && mmc partconf 0 1 1 0 && mmc rst-function 0 1'
-setenv update_uboot_it 'setenv module_type -it; run update_uboot'
-
-setenv update_kernel 'tftpboot ${loadaddr} ${board_name}/uImage && fatwrite mmc 0:1 ${loadaddr} uImage ${filesize}'
-
-setenv update_fdt 'tftpboot ${loadaddr} ${board_name}/${fdt_file} && fatwrite mmc 0:1 ${loadaddr} ${fdt_file} ${filesize}'
-
-setenv update_configblock 'run check_configblock; tftpboot ${loadaddr} ${board_name}/configblock.bin && mmc dev 0 1 && mmc write ${loadaddr} ${conf_blk_offset} 1'
-
-setenv update_1 'tftpboot ${loadaddr} ${board_name}/mbr.bin && mmc dev 0 0 && mmc write ${loadaddr} 0x0 0x1'
-setenv update_2 'tftpboot ${loadaddr} ${board_name}/boot.vfat && run set_blkcnt && mmc dev 0 0 && mmc write ${loadaddr} 0x2000 ${blkcnt}'
-#do it in chunks of 64M to fit into DDR RAM of the smallest module
-#split root.ext3 into multiple 64M chunks before copying to TFTP folder as follows
-#split -a 2 -b `expr 64 \* 1024 \* 1024` --numeric-suffixes=10 root.ext3 root.ext3-
-setenv update_3 'setenv filesize 4000000; setenv filenum 10; setenv blkstart a000; while test ${filesize} -eq "4000000"; do run cp_file_chunk; run set_nextnum; done; true'
-
-setenv echo_migrate echo "successfully updated U-Boot, power-cycle and enter \"run setupdate\; run migrate\" to complete update"
-setenv echo_migrate-it echo "successfully updated U-Boot, power-cycle and enter \"run setupdate\; run migrate_it\" to complete update"
-setenv migrate 'run migrate_configblock; run update_latest; reset'
-setenv migrate_it 'setenv module_type -it; run migrate'
-setenv update_v2.4b1 'run check_configblock || run migrate_configblock; run migrate_uboot_old && run echo_migrate${module_type}'
-setenv update_v2.5b3 'run check_configblock || run migrate_configblock; run migrate_uboot && run echo_migrate${module_type}'
-
-setenv update_latest 'run update_uboot; run update_1; run update_2; run update_kernel; run update_fdt; run update_3'
-setenv update_new 'updt_fuse -n && run update_latest && reset; run update_v2.5b3'
-setenv update 'mmc bootbus 0 2 0 1 && run update_new && exit; run update_v2.4b1'
-setenv update_it 'setenv module_type -it; run update'
-
-echo 'enter "run update" or "run update_it" to update the entire module'
diff --git a/meta-fsl-extras/recipes/u-boot/u-boot-script-toradex/colibri-imx6/0001-Update-only-u-boot.patch b/meta-fsl-extras/recipes/u-boot/u-boot-script-toradex/colibri-imx6/0001-Update-only-u-boot.patch
deleted file mode 100644
index cf01d59..0000000
--- a/meta-fsl-extras/recipes/u-boot/u-boot-script-toradex/colibri-imx6/0001-Update-only-u-boot.patch
+++ /dev/null
@@ -1,52 +0,0 @@
-From 40445299edb425159c30609e1ab7172801535a43 Mon Sep 17 00:00:00 2001
-From: Samuli Piippo <samuli.piippo@qt.io>
-Date: Wed, 14 Sep 2016 10:17:02 +0300
-Subject: [PATCH] Update only u-boot
-
----
- flash_blk.scr | 6 +++---
- flash_eth.scr | 6 +++---
- 2 files changed, 6 insertions(+), 6 deletions(-)
-
-diff --git a/flash_blk.scr b/flash_blk.scr
-index a60a7a5..23c5b72 100644
---- a/flash_blk.scr
-+++ b/flash_blk.scr
-@@ -29,13 +29,13 @@ setenv update_2 'load ${interface} ${drive}:1 ${loadaddr} ${board_name}/boot.vfa
- #do it in chunks of 64M to fit into DDR RAM of the smallest module
- setenv update_3 'setenv filesize 4000000; setenv filepos 0; setenv blkstart a000; while test ${filesize} -eq "4000000"; do run cp_file_chunk; run set_nextpos; done; true'
- 
--setenv echo_migrate echo "successfully updated U-Boot, power-cycle and enter \"run setupdate\; run migrate\" to complete update"
-+setenv echo_migrate echo "successfully updated U-Boot"
- setenv migrate 'run migrate_configblock; run update_latest; reset'
- setenv update_v2.4b1 'run check_configblock || run migrate_configblock; run migrate_uboot_old && run echo_migrate'
- setenv update_v2.5b3 'run check_configblock || run migrate_configblock; run migrate_uboot && run echo_migrate'
- 
- setenv update_latest 'run update_uboot; run update_1; run update_2; run update_kernel; run update_fdt; run update_3'
--setenv update_new 'updt_fuse -n && run update_latest && reset; run update_v2.5b3'
-+setenv update_new 'updt_fuse -n && run update_uboot && reset; run update_v2.5b3'
- setenv update 'mmc bootbus 0 2 0 1 && run update_new && exit; run update_v2.4b1'
- 
--echo 'enter "run update" to update the entire module'
-+echo 'enter "run update" to update the uboot'
-diff --git a/flash_eth.scr b/flash_eth.scr
-index a3906b2..14f4104 100644
---- a/flash_eth.scr
-+++ b/flash_eth.scr
-@@ -30,13 +30,13 @@ setenv update_2 'tftpboot ${loadaddr} ${board_name}/boot.vfat && run set_blkcnt
- #split -a 2 -b `expr 64 \* 1024 \* 1024` --numeric-suffixes=10 root.ext3 root.ext3-
- setenv update_3 'setenv filesize 4000000; setenv filenum 10; setenv blkstart a000; while test ${filesize} -eq "4000000"; do run cp_file_chunk; run set_nextnum; done; true'
- 
--setenv echo_migrate echo "successfully updated U-Boot, power-cycle and enter \"run setupdate\; run migrate\" to complete update"
-+setenv echo_migrate echo "successfully updated U-Boot"
- setenv migrate 'run migrate_configblock; run update_latest; reset'
- setenv update_v2.4b1 'run check_configblock || run migrate_configblock; run migrate_uboot_old && run echo_migrate'
- setenv update_v2.5b3 'run check_configblock || run migrate_configblock; run migrate_uboot && run echo_migrate'
- 
- setenv update_latest 'run update_uboot; run update_1; run update_2; run update_kernel; run update_fdt; run update_3'
--setenv update_new 'updt_fuse -n && run update_latest && reset; run update_v2.5b3'
-+setenv update_new 'updt_fuse -n && run update_uboot && reset; run update_v2.5b3'
- setenv update 'mmc bootbus 0 2 0 1 && run update_new && exit; run update_v2.4b1'
- 
--echo 'enter "run update" to update the entire module'
-+echo 'enter "run update" to update the uboot'
diff --git a/meta-fsl-extras/recipes/u-boot/u-boot-script-toradex/colibri-imx7/0001-Update-only-u-boot.patch b/meta-fsl-extras/recipes/u-boot/u-boot-script-toradex/colibri-imx7/0001-Update-only-u-boot.patch
index 08ddd88..932f228 100644
--- a/meta-fsl-extras/recipes/u-boot/u-boot-script-toradex/colibri-imx7/0001-Update-only-u-boot.patch
+++ b/meta-fsl-extras/recipes/u-boot/u-boot-script-toradex/colibri-imx7/0001-Update-only-u-boot.patch
@@ -12,25 +12,25 @@ diff --git a/flash_blk.scr b/flash_blk.scr
 index cc4cf38..b63366a 100644
 --- a/flash_blk.scr
 +++ b/flash_blk.scr
-@@ -14,6 +14,6 @@ setenv update_rootfs 'fatload ${interface} 0:1 ${loadaddr} ${board_name}/ubifs.i
+@@ -15,7 +15,7 @@ setenv update_fdt 'fatload ${interface} 0:1 ${loadaddr} ${board_name}/${soc}-col
+ setenv update_rootfs 'fatload ${interface} 0:1 ${loadaddr} ${board_name}/ubifs.img && ubi write ${loadaddr} rootfs ${filesize}'
  
- setenv upgrade_alpha1_msg 'Updated U-Boot, please reset the board and use "run setupdate && run update" again.'
- setenv prepare_alpha1_uboot 'if test "${soc}" = "mx7"; then run update_uboot && echo ${upgrade_alpha1_msg} && reset; fi'
--setenv update 'mtdparts default && run prepare_alpha1_uboot; run update_uboot && run prepare_ubi && run update_kernel && run update_fdt && run update_rootfs && reset'
-+setenv update 'mtdparts default && run update_uboot && reset'
+ # Test which version of U-Boot we are currently running on
+-setenv update 'mtdparts default && env default -f updlevel && if test $updlevel -lt 1; then; run update_uboot_old; else; run update_uboot && run prepare_ubi && run update_kernel && run update_fdt && run update_rootfs && reset; fi'
++setenv update 'mtdparts default && env default -f updlevel && if test $updlevel -lt 1; then; run update_uboot_old; else; run update_uboot; fi'
  
--echo 'enter "run update" to update the entire module'
-+echo 'enter "run update" to update the uboot'
+ if itest.b *0x30360800 -lt 0x11; then
+ echo &&
 diff --git a/flash_eth.scr b/flash_eth.scr
 index 01be124..13025de 100644
 --- a/flash_eth.scr
 +++ b/flash_eth.scr
-@@ -14,6 +14,6 @@ setenv update_rootfs 'tftpboot ${loadaddr} ${board_name}/ubifs.img && ubi write
+@@ -15,7 +15,7 @@ setenv update_fdt 'tftpboot ${loadaddr} ${board_name}/${soc}-colibri-${fdt_board
+ setenv update_rootfs 'tftpboot ${loadaddr} ${board_name}/ubifs.img && ubi write ${loadaddr} rootfs ${filesize}'
  
- setenv upgrade_alpha1_msg 'Updated U-Boot, please reset the board and use "run setupdate && run update" again.'
- setenv prepare_alpha1_uboot 'if test "${soc}" = "mx7"; then run update_uboot && echo ${upgrade_alpha1_msg} && reset; fi'
--setenv update 'mtdparts default && run prepare_alpha1_uboot; run update_uboot && run prepare_ubi && run update_kernel && run update_fdt && run update_rootfs && reset'
-+setenv update 'mtdparts default && run update_uboot && reset'
+ # Test which version of U-Boot we are currently running on
+-setenv update 'mtdparts default && env default -f updlevel && if test $updlevel -lt 1; then; run update_uboot_old; else; run update_uboot && run prepare_ubi && run update_kernel && run update_fdt && run update_rootfs && reset; fi'
++setenv update 'mtdparts default && env default -f updlevel && if test $updlevel -lt 1; then; run update_uboot_old; else; run update_uboot && reset; fi'
  
--echo 'enter "run update" to update the entire module'
-+echo 'enter "run update" to update the uboot'
+ if itest.b *0x30360800 -lt 0x11; then
+ echo &&
diff --git a/meta-fsl-extras/recipes/u-boot/u-boot-script-toradex/colibri-imx7/flash_blk.scr b/meta-fsl-extras/recipes/u-boot/u-boot-script-toradex/colibri-imx7/flash_blk.scr
index b63366a..f1e73bb 100644
--- a/meta-fsl-extras/recipes/u-boot/u-boot-script-toradex/colibri-imx7/flash_blk.scr
+++ b/meta-fsl-extras/recipes/u-boot/u-boot-script-toradex/colibri-imx7/flash_blk.scr
@@ -1,5 +1,5 @@
 setenv create_bcb 'nand erase.part mx7-bcb && writebcb 80000 200000'
-setenv update_configblock 'fatload ${interface} 0:1 ${loadaddr} ${board_name}/configblock.bin && nand write ${loadaddr} 0x800 ${filesize} && nand write ${loadaddr} 0x20800 ${filesize}'
+setenv recreate_bcb 'nand read ${loadaddr} 0x800 0x800 && run create_bcb && nand write ${loadaddr} 0x800 0x800'
 
 # Migrate to UBI volume based boot schema
 setenv prepare_kernel_fdt 'ubi create kernel 0x800000 static && ubi create dtb 0x20000 static'
@@ -7,13 +7,23 @@ setenv prepare_m4firmware 'ubi create m4firmware 0xe0000 static'
 setenv prepare_rootfs 'ubi create rootfs 0 dynamic'
 setenv prepare_ubi 'ubi part ubi && if ubi check rootfs; then if ubi check kernel; then else ubi remove rootfs && run prepare_kernel_fdt && run prepare_m4firmware && run prepare_rootfs; fi; else run prepare_kernel_fdt && run prepare_m4firmware && run prepare_rootfs; fi'
 
-setenv update_uboot 'fatload ${interface} 0:1 ${loadaddr} ${board_name}/u-boot-nand.imx && nand erase.part u-boot && nand erase.part u-boot-env && writeboot ${loadaddr} 80000 200000 $filesize'
+setenv upgrade_msg 'echo && echo "Upgraded U-Boot, please reset the board and complete update with" && echo "# run setupdate && run recreate_bcb && run update" && echo && echo "(note the recreate_bcb command in between!)"'
+setenv update_uboot_old 'fatload ${interface} 0:1 ${loadaddr} ${board_name}/u-boot-nand.imx && nand erase.part u-boot && nand erase.part u-boot-env && writeboot ${loadaddr} 80000 200000 $filesize && nand erase.part u-boot-env && nand erase.part ubi && run upgrade_msg'
+setenv update_uboot 'fatload ${interface} 0:1 ${loadaddr} ${board_name}/u-boot-nand.imx && nand erase.part u-boot1 && nand write ${loadaddr} u-boot1 ${filesize} && nand erase.part u-boot2 && nand write ${loadaddr} u-boot2 ${filesize}'
 setenv update_kernel 'fatload ${interface} 0:1 ${loadaddr} ${board_name}/zImage && ubi write ${loadaddr} kernel ${filesize}'
 setenv update_fdt 'fatload ${interface} 0:1 ${loadaddr} ${board_name}/${soc}-colibri-${fdt_board}.dtb && ubi write ${loadaddr} dtb ${filesize}'
 setenv update_rootfs 'fatload ${interface} 0:1 ${loadaddr} ${board_name}/ubifs.img && ubi write ${loadaddr} rootfs ${filesize}'
 
-setenv upgrade_alpha1_msg 'Updated U-Boot, please reset the board and use "run setupdate && run update" again.'
-setenv prepare_alpha1_uboot 'if test "${soc}" = "mx7"; then run update_uboot && echo ${upgrade_alpha1_msg} && reset; fi'
-setenv update 'mtdparts default && run prepare_alpha1_uboot; run update_uboot && run prepare_ubi && run update_kernel && run update_fdt && run update_rootfs && reset'
+# Test which version of U-Boot we are currently running on
+setenv update 'mtdparts default && env default -f updlevel && if test $updlevel -lt 1; then; run update_uboot_old; else; run update_uboot && run prepare_ubi && run update_kernel && run update_fdt && run update_rootfs && reset; fi'
 
+if itest.b *0x30360800 -lt 0x11; then
+echo &&
+echo 'NOTE: The U-Boot provided with this BSP version does not support the' &&
+echo 'early tapeout/stepping of i.MX 7 used on your module. You still can' &&
+echo 'update the kernel/device-tree/rootfs manually using: ' &&
+echo '# run prepare_ubi && run update_kernel && run update_fdt && run update_rootfs' &&
+echo && setenv update_uboot; setenv update_uboot_old; setenv update
+else
 echo 'enter "run update" to update the entire module'
+fi
diff --git a/meta-fsl-extras/recipes/u-boot/u-boot-script-toradex/colibri-imx7/flash_eth.scr b/meta-fsl-extras/recipes/u-boot/u-boot-script-toradex/colibri-imx7/flash_eth.scr
index 13025de..66cd29d 100644
--- a/meta-fsl-extras/recipes/u-boot/u-boot-script-toradex/colibri-imx7/flash_eth.scr
+++ b/meta-fsl-extras/recipes/u-boot/u-boot-script-toradex/colibri-imx7/flash_eth.scr
@@ -1,5 +1,5 @@
 setenv create_bcb 'nand erase.part mx7-bcb && writebcb 80000 200000'
-setenv update_configblock 'tftpboot ${loadaddr} ${board_name}/configblock.bin && nand write ${loadaddr} 0x800 ${filesize} && nand write ${loadaddr} 0x20800 ${filesize}'
+setenv recreate_bcb 'nand read ${loadaddr} 0x800 0x800 && run create_bcb && nand write ${loadaddr} 0x800 0x800'
 
 # Migrate to UBI volume based boot schema
 setenv prepare_kernel_fdt 'ubi create kernel 0x800000 static && ubi create dtb 0x20000 static'
@@ -7,13 +7,23 @@ setenv prepare_m4firmware 'ubi create m4firmware 0xe0000 static'
 setenv prepare_rootfs 'ubi create rootfs 0 dynamic'
 setenv prepare_ubi 'ubi part ubi && if ubi check rootfs; then if ubi check kernel; then else ubi remove rootfs && run prepare_kernel_fdt && run prepare_m4firmware && run prepare_rootfs; fi; else run prepare_kernel_fdt && run prepare_m4firmware && run prepare_rootfs; fi'
 
-setenv update_uboot 'tftpboot ${loadaddr} ${board_name}/u-boot-nand.imx && nand erase.part u-boot && nand erase.part u-boot-env && writeboot ${loadaddr} 80000 200000 $filesize'
+setenv upgrade_msg 'echo && echo "Upgraded U-Boot, please reset the board and complete update with" && echo "# run setupdate && run recreate_bcb && run update" && echo && echo "(note the recreate_bcb command in between!)"'
+setenv update_uboot_old 'tftpboot ${loadaddr} ${board_name}/u-boot-nand.imx && nand erase.part u-boot && nand erase.part u-boot-env && writeboot ${loadaddr} 80000 200000 $filesize && nand erase.part u-boot-env && nand erase.part ubi && run upgrade_msg'
+setenv update_uboot 'tftpboot ${loadaddr} ${board_name}/u-boot-nand.imx && nand erase.part u-boot1 && nand write ${loadaddr} u-boot1 ${filesize} && nand erase.part u-boot2 && nand write ${loadaddr} u-boot2 ${filesize}'
 setenv update_kernel 'tftpboot ${loadaddr} ${board_name}/zImage && ubi write ${loadaddr} kernel ${filesize}'
 setenv update_fdt 'tftpboot ${loadaddr} ${board_name}/${soc}-colibri-${fdt_board}.dtb && ubi write ${loadaddr} dtb ${filesize}'
 setenv update_rootfs 'tftpboot ${loadaddr} ${board_name}/ubifs.img && ubi write ${loadaddr} rootfs ${filesize}'
 
-setenv upgrade_alpha1_msg 'Updated U-Boot, please reset the board and use "run setupdate && run update" again.'
-setenv prepare_alpha1_uboot 'if test "${soc}" = "mx7"; then run update_uboot && echo ${upgrade_alpha1_msg} && reset; fi'
-setenv update 'mtdparts default && run prepare_alpha1_uboot; run update_uboot && run prepare_ubi && run update_kernel && run update_fdt && run update_rootfs && reset'
+# Test which version of U-Boot we are currently running on
+setenv update 'mtdparts default && env default -f updlevel && if test $updlevel -lt 1; then; run update_uboot_old; else; run update_uboot && run prepare_ubi && run update_kernel && run update_fdt && run update_rootfs && reset; fi'
 
+if itest.b *0x30360800 -lt 0x11; then
+echo &&
+echo 'NOTE: The U-Boot provided with this BSP version does not support the' &&
+echo 'early tapeout/stepping of i.MX 7 used on your module. You still can' &&
+echo 'update the kernel/device-tree/rootfs manually using: ' &&
+echo '# run prepare_ubi && run update_kernel && run update_fdt && run update_rootfs' &&
+echo && setenv update_uboot; setenv update_uboot_old; setenv update
+else
 echo 'enter "run update" to update the entire module'
+fi
diff --git a/meta-fsl-extras/recipes/u-boot/u-boot-script-toradex/mx6/0001-Update-only-u-boot.patch b/meta-fsl-extras/recipes/u-boot/u-boot-script-toradex/mx6/0001-Update-only-u-boot.patch
new file mode 100644
index 0000000..a1e70ba
--- /dev/null
+++ b/meta-fsl-extras/recipes/u-boot/u-boot-script-toradex/mx6/0001-Update-only-u-boot.patch
@@ -0,0 +1,22 @@
+From 25c3ac90c9d0313e4f7d99a68886f8f43d5a0b52 Mon Sep 17 00:00:00 2001
+From: Samuli Piippo <samuli.piippo@qt.io>
+Date: Mon, 15 May 2017 14:04:38 +0300
+Subject: [PATCH] Update only u-boot
+
+---
+ flash_blk.scr | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+diff --git a/flash_blk.scr b/flash_blk.scr
+index ec3e00b..367b910 100644
+--- a/flash_blk.scr
++++ b/flash_blk.scr
+@@ -41,7 +41,7 @@ setenv update_v2.5b3 'run check_configblock || run migrate_configblock; run migr
+ 
+ # Not migrated to SPL if no U-Boot Image Magic Number at 69k into the eMMC
+ setenv update_to_spl 'mmc dev 0 1; mmc read $loadaddr 8a 1; itest.l *12000000 -ne 56190527 && run update_spl'
+-setenv update_latest 'run update_to_spl; run update_uboot; run update_1; run update_2; run update_kernel; run update_fdt; run update_3'
++setenv update_latest 'run update_to_spl; run update_uboot'
+ # 'updt_fuse' not available in V2.5 Beta 3 and earlier, migration needed
+ setenv update_new 'updt_fuse -n && run update_latest && reset; run update_v2.5b3'
+ # 'mmc bootbus' not available in in V2.4 Beta 1 and earlier, migration needed
diff --git a/meta-fsl-extras/recipes/u-boot/u-boot-script-toradex/colibri-imx6/flash_blk.scr b/meta-fsl-extras/recipes/u-boot/u-boot-script-toradex/mx6/flash_blk.scr
index 23c5b72..ec3e00b 100644
--- a/meta-fsl-extras/recipes/u-boot/u-boot-script-toradex/colibri-imx6/flash_blk.scr
+++ b/meta-fsl-extras/recipes/u-boot/u-boot-script-toradex/mx6/flash_blk.scr
@@ -1,8 +1,11 @@
 test -n ${interface} || setenv interface mmc
 test -n ${drive} || setenv drive 1
+setenv uboot_hwpart 1
 
 setenv set_blkcnt 'setexpr blkcnt ${filesize} + 0x1ff && setexpr blkcnt ${blkcnt} / 0x200'
-setenv set_nextpos 'setexpr filepos ${filepos} + ${filesize}; setexpr blkstart ${blkstart} + ${blkcnt}'
+#workaround U-Boot counting in hex and split did in decimal
+setenv incr_decimal 'setexpr filenum ${filenum} + 1; setexpr filenrlow1 ${filenum} % 0x100; setexpr filenrlow2 ${filenrlow1} % 0x10; test ${filenrlow1} -eq "9a" && test ${filenrlow2} -ne "9" && setexpr filenum ${filenum} + 0x66; test ${filenrlow1} -ne "9a" && test ${filenrlow2} -eq "a" && setexpr filenum ${filenum} + 0x6; true'
+setenv set_nextnum 'run incr_decimal; setexpr blkstart ${blkstart} + ${blkcnt}'
 
 setenv check_1 'setenv conf_blk_offset 0x1fff; mmc read ${loadaddr} ${conf_blk_offset} 1'
 setenv check_2 'setenv conf_blk_offset 0xfff; mmc read ${loadaddr} ${conf_blk_offset} 1'
@@ -11,12 +14,14 @@ setenv check_configblock 'setexpr toradex_oui_addr ${loadaddr} + 8; mw.l ${kerne
 
 setenv migrate_configblock 'run check_configblock; mmc dev 0 0 && mmc read ${loadaddr} 0x500 1 && cmp.b ${kernel_addr_r} ${toradex_oui_addr} 3 && mmc dev 0 1 && mmc write ${loadaddr} ${conf_blk_offset} 1'
 
-setenv migrate_uboot_old 'load ${interface} ${drive}:1 ${loadaddr} ${board_name}/u-boot.imx && run set_blkcnt && mmc dev 0 0 && mmc write ${loadaddr} 2 ${blkcnt}; patch_ddr_size'
-setenv migrate_uboot 'load ${interface} ${drive}:1 ${loadaddr} ${board_name}/u-boot.imx && run set_blkcnt && mmc dev 0 1 && mmc write ${loadaddr} 2 ${blkcnt} && patch_ddr_size && mmc bootbus 0 2 1 2 && mmc partconf 0 1 1 0'
+setenv migrate_uboot_old 'setenv uboot_hwpart 0; run update_spl && run update_uboot_bin; setenv uboot_hwpart 1'
+setenv migrate_uboot 'run update_spl && run update_uboot_bin && mmc bootbus 0 2 1 2 && mmc partconf 0 1 1 0'
 
-setenv cp_file_chunk 'load ${interface} ${drive}:1 ${loadaddr} ${board_name}/root.ext3 ${filesize} ${filepos}; run set_blkcnt; mmc dev 0 0 && mmc write ${loadaddr} ${blkstart} ${blkcnt}'
+setenv cp_file_chunk 'load ${interface} ${drive}:1 ${loadaddr} ${board_name}/root.ext3-${filenum} ${filesize} ${filepos}; run set_blkcnt; mmc dev 0 0 && mmc write ${loadaddr} ${blkstart} ${blkcnt}'
 
-setenv update_uboot 'load ${interface} ${drive}:1 ${loadaddr} ${board_name}/u-boot.imx && run set_blkcnt && mmc dev 0 1 && mmc write ${loadaddr} 2 ${blkcnt} && patch_ddr_size && updt_fuse && mmc bootbus 0 2 0 1 && mmc partconf 0 1 1 0 && mmc rst-function 0 1'
+setenv update_spl 'load ${interface} ${drive}:1 ${loadaddr} ${board_name}/SPL && run set_blkcnt && mmc dev 0 ${uboot_hwpart} && mmc write ${loadaddr} 2 ${blkcnt}'
+setenv update_uboot_bin 'load ${interface} ${drive}:1 ${loadaddr} ${board_name}/u-boot.imx-spl && run set_blkcnt && mmc dev 0 ${uboot_hwpart} && mmc write ${loadaddr} 8a ${blkcnt}'
+setenv update_uboot 'run update_uboot_bin && updt_fuse && mmc bootbus 0 2 0 1 && mmc partconf 0 1 1 0 && mmc rst-function 0 1'
 
 setenv update_kernel 'load ${interface} ${drive}:1 ${loadaddr} ${board_name}/uImage && fatwrite mmc 0:1 ${loadaddr} uImage ${filesize}'
 
@@ -27,15 +32,19 @@ setenv update_configblock 'run check_configblock; load ${interface} ${drive}:1 $
 setenv update_1 'load ${interface} ${drive}:1 ${loadaddr} ${board_name}/mbr.bin && mmc dev 0 0 && mmc write ${loadaddr} 0x0 0x1'
 setenv update_2 'load ${interface} ${drive}:1 ${loadaddr} ${board_name}/boot.vfat && run set_blkcnt && mmc dev 0 0 && mmc write ${loadaddr} 0x2000 ${blkcnt}'
 #do it in chunks of 64M to fit into DDR RAM of the smallest module
-setenv update_3 'setenv filesize 4000000; setenv filepos 0; setenv blkstart a000; while test ${filesize} -eq "4000000"; do run cp_file_chunk; run set_nextpos; done; true'
+setenv update_3 'setenv filesize 4000000; setenv filenum 100; setenv blkstart a000; while test ${filesize} -eq "4000000"; do run cp_file_chunk; run set_nextnum; done; true'
 
 setenv echo_migrate echo "successfully updated U-Boot, power-cycle and enter \"run setupdate\; run migrate\" to complete update"
 setenv migrate 'run migrate_configblock; run update_latest; reset'
 setenv update_v2.4b1 'run check_configblock || run migrate_configblock; run migrate_uboot_old && run echo_migrate'
 setenv update_v2.5b3 'run check_configblock || run migrate_configblock; run migrate_uboot && run echo_migrate'
 
-setenv update_latest 'run update_uboot; run update_1; run update_2; run update_kernel; run update_fdt; run update_3'
+# Not migrated to SPL if no U-Boot Image Magic Number at 69k into the eMMC
+setenv update_to_spl 'mmc dev 0 1; mmc read $loadaddr 8a 1; itest.l *12000000 -ne 56190527 && run update_spl'
+setenv update_latest 'run update_to_spl; run update_uboot; run update_1; run update_2; run update_kernel; run update_fdt; run update_3'
+# 'updt_fuse' not available in V2.5 Beta 3 and earlier, migration needed
 setenv update_new 'updt_fuse -n && run update_latest && reset; run update_v2.5b3'
+# 'mmc bootbus' not available in in V2.4 Beta 1 and earlier, migration needed
 setenv update 'mmc bootbus 0 2 0 1 && run update_new && exit; run update_v2.4b1'
 
 echo 'enter "run update" to update the entire module'
diff --git a/meta-fsl-extras/recipes/u-boot/u-boot-script-toradex/colibri-imx6/flash_eth.scr b/meta-fsl-extras/recipes/u-boot/u-boot-script-toradex/mx6/flash_eth.scr
index 14f4104..77e2ac9 100644
--- a/meta-fsl-extras/recipes/u-boot/u-boot-script-toradex/colibri-imx6/flash_eth.scr
+++ b/meta-fsl-extras/recipes/u-boot/u-boot-script-toradex/mx6/flash_eth.scr
@@ -1,6 +1,8 @@
+setenv uboot_hwpart 1
+
 setenv set_blkcnt 'setexpr blkcnt ${filesize} + 0x1ff && setexpr blkcnt ${blkcnt} / 0x200'
 #workaround U-Boot counting in hex and split did in decimal
-setenv incr_decimal 'setexpr filenum ${filenum} + 1; setexpr filenrlow ${filenum} % 0x10; test ${filenrlow} -eq "a" && setexpr filenum ${filenum} + 0x6; true'
+setenv incr_decimal 'setexpr filenum ${filenum} + 1; setexpr filenrlow1 ${filenum} % 0x100; setexpr filenrlow2 ${filenrlow1} % 0x10; test ${filenrlow1} -eq "9a" && test ${filenrlow2} -ne "9" && setexpr filenum ${filenum} + 0x66; test ${filenrlow1} -ne "9a" && test ${filenrlow2} -eq "a" && setexpr filenum ${filenum} + 0x6; true'
 setenv set_nextnum 'run incr_decimal; setexpr blkstart ${blkstart} + ${blkcnt}'
 
 setenv check_1 'setenv conf_blk_offset 0x1fff; mmc read ${loadaddr} ${conf_blk_offset} 1'
@@ -10,12 +12,14 @@ setenv check_configblock 'setexpr toradex_oui_addr ${loadaddr} + 8; mw.l ${kerne
 
 setenv migrate_configblock 'run check_configblock; mmc dev 0 0 && mmc read ${loadaddr} 0x500 1 && cmp.b ${kernel_addr_r} ${toradex_oui_addr} 3 && mmc dev 0 1 && mmc write ${loadaddr} ${conf_blk_offset} 1'
 
-setenv migrate_uboot_old 'tftpboot ${loadaddr} ${board_name}/u-boot.imx && run set_blkcnt && mmc dev 0 0 && mmc write ${loadaddr} 2 ${blkcnt}; patch_ddr_size'
-setenv migrate_uboot 'tftpboot ${loadaddr} ${board_name}/u-boot.imx && run set_blkcnt && mmc dev 0 1 && mmc write ${loadaddr} 2 ${blkcnt} && patch_ddr_size && mmc bootbus 0 2 1 2 && mmc partconf 0 1 1 0'
+setenv migrate_uboot_old 'setenv uboot_hwpart 0; run update_spl && run update_uboot_bin; setenv uboot_hwpart 1'
+setenv migrate_uboot 'run update_spl && run update_uboot_bin && mmc bootbus 0 2 1 2 && mmc partconf 0 1 1 0'
 
 setenv cp_file_chunk 'tftpboot ${loadaddr} ${board_name}/root.ext3-${filenum}; run set_blkcnt; mmc dev 0 0 && mmc write ${loadaddr} ${blkstart} ${blkcnt}'
 
-setenv update_uboot 'tftpboot ${loadaddr} ${board_name}/u-boot.imx && run set_blkcnt && mmc dev 0 1 && mmc write ${loadaddr} 2 ${blkcnt} && patch_ddr_size && updt_fuse && mmc bootbus 0 2 0 1 && mmc partconf 0 1 1 0 && mmc rst-function 0 1'
+setenv update_spl 'tftpboot ${loadaddr} ${board_name}/SPL && run set_blkcnt && mmc dev 0 ${uboot_hwpart} && mmc write ${loadaddr} 2 ${blkcnt}'
+setenv update_uboot_bin 'tftpboot ${loadaddr} ${board_name}/u-boot.imx-spl && run set_blkcnt && mmc dev 0 ${uboot_hwpart} && mmc write ${loadaddr} 8a ${blkcnt}'
+setenv update_uboot 'run update_uboot_bin && updt_fuse && mmc bootbus 0 2 0 1 && mmc partconf 0 1 1 0 && mmc rst-function 0 1'
 
 setenv update_kernel 'tftpboot ${loadaddr} ${board_name}/uImage && fatwrite mmc 0:1 ${loadaddr} uImage ${filesize}'
 
@@ -26,17 +30,19 @@ setenv update_configblock 'run check_configblock; tftpboot ${loadaddr} ${board_n
 setenv update_1 'tftpboot ${loadaddr} ${board_name}/mbr.bin && mmc dev 0 0 && mmc write ${loadaddr} 0x0 0x1'
 setenv update_2 'tftpboot ${loadaddr} ${board_name}/boot.vfat && run set_blkcnt && mmc dev 0 0 && mmc write ${loadaddr} 0x2000 ${blkcnt}'
 #do it in chunks of 64M to fit into DDR RAM of the smallest module
-#split root.ext3 into multiple 64M chunks before copying to TFTP folder as follows
-#split -a 2 -b `expr 64 \* 1024 \* 1024` --numeric-suffixes=10 root.ext3 root.ext3-
-setenv update_3 'setenv filesize 4000000; setenv filenum 10; setenv blkstart a000; while test ${filesize} -eq "4000000"; do run cp_file_chunk; run set_nextnum; done; true'
+setenv update_3 'setenv filesize 4000000; setenv filenum 100; setenv blkstart a000; while test ${filesize} -eq "4000000"; do run cp_file_chunk; run set_nextnum; done; true'
 
 setenv echo_migrate echo "successfully updated U-Boot, power-cycle and enter \"run setupdate\; run migrate\" to complete update"
 setenv migrate 'run migrate_configblock; run update_latest; reset'
 setenv update_v2.4b1 'run check_configblock || run migrate_configblock; run migrate_uboot_old && run echo_migrate'
 setenv update_v2.5b3 'run check_configblock || run migrate_configblock; run migrate_uboot && run echo_migrate'
 
-setenv update_latest 'run update_uboot; run update_1; run update_2; run update_kernel; run update_fdt; run update_3'
+# Not migrated to SPL if no U-Boot Image Magic Number at 69k into the eMMC
+setenv update_to_spl 'mmc dev 0 1; mmc read $loadaddr 8a 1; itest.l *12000000 -ne 56190527 && run update_spl'
+setenv update_latest 'run update_to_spl; run update_uboot; run update_1; run update_2; run update_kernel; run update_fdt; run update_3'
+# 'updt_fuse' not available in V2.5 Beta 3 and earlier, migration needed
 setenv update_new 'updt_fuse -n && run update_latest && reset; run update_v2.5b3'
+# 'mmc bootbus' not available in in V2.4 Beta 1 and earlier, migration needed
 setenv update 'mmc bootbus 0 2 0 1 && run update_new && exit; run update_v2.4b1'
 
 echo 'enter "run update" to update the entire module'
diff --git a/meta-fsl-extras/recipes/u-boot/u-boot-script-toradex/mx7/flash_blk.scr b/meta-fsl-extras/recipes/u-boot/u-boot-script-toradex/mx7/flash_blk.scr
deleted file mode 100644
index 3e05a85..0000000
--- a/meta-fsl-extras/recipes/u-boot/u-boot-script-toradex/mx7/flash_blk.scr
+++ /dev/null
@@ -1,6 +0,0 @@
-test -n ${interface} || setenv interface mmc
-test -n ${drive} || setenv drive 0
-
-setenv set_blkcnt 'setexpr blkcnt ${filesize} + 0x1ff && setexpr blkcnt ${blkcnt} / 0x200'
-setenv update_uboot 'fatload ${interface} ${drive}:1 ${loadaddr} u-boot.imx && run set_blkcnt && mmc dev 0 0 && mmc write ${loadaddr} 2 ${blkcnt}'
-echo 'enter "run update_uboot" to update the uboot'
diff --git a/meta-fsl-extras/recipes/u-boot/u-boot-script-toradex/mx7/flash_mmc.scr b/meta-fsl-extras/recipes/u-boot/u-boot-script-toradex/mx7/flash_mmc.scr
deleted file mode 100644
index 0c16652..0000000
--- a/meta-fsl-extras/recipes/u-boot/u-boot-script-toradex/mx7/flash_mmc.scr
+++ /dev/null
@@ -1,6 +0,0 @@
-#flash_mmc has been renamed to flash_blk, ensure compatibility when updating from older versions
-test -n ${interface} || setenv interface mmc
-test -n ${drive} || setenv drive 0
-
-fatload ${interface} ${drive}:1 ${loadaddr} flash_blk.img
-source ${loadaddr}
diff --git a/meta-fsl-extras/recipes/u-boot/u-boot-toradex/0001-Make-sdboot-default-on-all-boards.patch b/meta-fsl-extras/recipes/u-boot/u-boot-toradex/0001-Make-sdboot-default-on-all-boards.patch
index 135dfd8..bf7861e 100644
--- a/meta-fsl-extras/recipes/u-boot/u-boot-toradex/0001-Make-sdboot-default-on-all-boards.patch
+++ b/meta-fsl-extras/recipes/u-boot/u-boot-toradex/0001-Make-sdboot-default-on-all-boards.patch
@@ -1,86 +1,66 @@
-From 4c748ee698961515c1602373f4f5d399c0a8e4a1 Mon Sep 17 00:00:00 2001
+From 003b18993fe1c5b1e64a44a3b831c63afb0e9a94 Mon Sep 17 00:00:00 2001
 From: Samuli Piippo <samuli.piippo@qt.io>
-Date: Wed, 14 Sep 2016 17:10:22 +0300
+Date: Mon, 15 May 2017 15:31:36 +0300
 Subject: [PATCH] Make sdboot default on all boards
 
 ---
- include/configs/apalis_imx6.h  | 13 +++++++------
- include/configs/colibri_imx6.h |  3 ++-
- include/configs/colibri_imx7.h |  2 +-
- include/configs/colibri_vf.h   |  2 +-
- 4 files changed, 11 insertions(+), 9 deletions(-)
+ include/configs/apalis_imx6.h  | 3 ++-
+ include/configs/colibri_imx6.h | 3 ++-
+ include/configs/colibri_imx7.h | 2 +-
+ include/configs/colibri_vf.h   | 2 +-
+ 4 files changed, 6 insertions(+), 4 deletions(-)
 
 diff --git a/include/configs/apalis_imx6.h b/include/configs/apalis_imx6.h
-index 3ea4a5c..53d9a0c 100644
+index 8dce5af..4f2f689 100644
 --- a/include/configs/apalis_imx6.h
 +++ b/include/configs/apalis_imx6.h
-@@ -252,14 +252,14 @@
-                "&& setenv dtbparam \" - ${fdt_addr_r}\" && true\0"
- 
- #define SD_BOOTCMD                                             \
--       "sdargs=ip=off root=/dev/mmcblk1p2 rw,noatime rootfstype=ext3 " \
--               "rootwait\0" \
-+       "drive=2\0" \
-        "sdboot=run setup; " \
--               "setenv bootargs ${defargs} ${sdargs} ${setupargs} " \
-+               "setenv bootargs ${defargs} ip=off root=/dev/mmcblk${drive}p2 " \
-+               "rw,noatime rootfstype=ext3 rootwait ${setupargs} " \
-                "${vidargs}; echo Booting from SD card in 8-bit slot...; " \
--               "run sddtbload; load mmc 1:1 ${kernel_addr_r} " \
-+               "run sddtbload; load mmc ${drive}:1 ${kernel_addr_r} " \
-                "${boot_file} && bootm ${kernel_addr_r} ${dtbparam}\0" \
--       "sddtbload=setenv dtbparam; load mmc 1:1 ${fdt_addr_r} " \
-+       "sddtbload=setenv dtbparam; load mmc ${drive}:1 ${fdt_addr_r} " \
-                "${fdt_file} && setenv dtbparam \" - ${fdt_addr_r}\" && true\0"
- 
- #define USB_BOOTCMD \
-@@ -279,7 +279,8 @@
- #define FDT_FILE "imx6q-apalis_v1_0-eval.dtb"
+@@ -256,7 +256,8 @@
  #endif
  #define CONFIG_EXTRA_ENV_SETTINGS \
+        BOOTENV \
 -       "bootcmd=run emmcboot ; echo ; echo emmcboot failed ; " \
 +       "bootcmd=run sdboot ; echo ; echo sdboot failed ; " \
-+               "run emmcboot ; echo ; echo emmcboot failed ; " \
-                "run nfsboot ; echo ; echo nfsboot failed ; " \
++        "run emmcboot ; echo ; echo emmcboot failed ; " \
+                "run distro_bootcmd ; " \
                 "usb start ;" \
                 "setenv stdout serial,vga ; setenv stdin serial,usbkbd\0" \
 diff --git a/include/configs/colibri_imx6.h b/include/configs/colibri_imx6.h
-index adc2d1e..9fd5f4c 100644
+index af49bcc..f6c6e9a 100644
 --- a/include/configs/colibri_imx6.h
 +++ b/include/configs/colibri_imx6.h
-@@ -245,7 +245,8 @@
- 
+@@ -231,7 +231,8 @@
  #define FDT_FILE "imx6dl-colibri-eval-v3.dtb"
  #define CONFIG_EXTRA_ENV_SETTINGS \
+        BOOTENV \
 -       "bootcmd=run emmcboot ; echo ; echo emmcboot failed ; " \
 +       "bootcmd=run sdboot ; echo ; echo sdboot failed ; " \
 +        "run emmcboot ; echo ; echo emmcboot failed ; " \
-                "run nfsboot ; echo ; echo nfsboot failed ; " \
+                "run distro_bootcmd ; " \
                 "usb start ;" \
                 "setenv stdout serial,vga ; setenv stdin serial,usbkbd\0" \
 diff --git a/include/configs/colibri_imx7.h b/include/configs/colibri_imx7.h
-index e585c81..f6267a7 100644
+index 1709032..01a8f43 100644
 --- a/include/configs/colibri_imx7.h
 +++ b/include/configs/colibri_imx7.h
-@@ -226,7 +226,7 @@
+@@ -104,7 +104,7 @@
                 "ubi read ${fdt_addr_r} dtb && " \
                 "run fdt_fixup && bootz ${kernel_addr_r} - ${fdt_addr_r}\0" \
  
--#define CONFIG_BOOTCOMMAND "run ubiboot; run sdboot; run nfsboot"
-+#define CONFIG_BOOTCOMMAND "run sdboot; run ubiboot; run nfsboot"
- 
- #define CONFIG_SYS_MMC_IMG_LOAD_PART   1
+-#define CONFIG_BOOTCOMMAND "run ubiboot; " \
++#define CONFIG_BOOTCOMMAND "run sdboot; run ubiboot; " \
+        "setenv fdtfile ${soc}-colibri-${fdt_board}.dtb && run distro_bootcmd;"
  
+ #define BOOTENV_RUN_NET_USB_START ""
 diff --git a/include/configs/colibri_vf.h b/include/configs/colibri_vf.h
-index 26cf60a..33a3e3b 100644
+index 6770f62..73a316a 100644
 --- a/include/configs/colibri_vf.h
 +++ b/include/configs/colibri_vf.h
-@@ -185,7 +185,7 @@
-        "ubi read ${fdt_addr_r} dtb && " \
-        "run fdt_fixup && bootz ${kernel_addr_r} - ${fdt_addr_r}\0" \
- 
--#define CONFIG_BOOTCOMMAND "run ubiboot; run sdboot; run nfsboot"
-+#define CONFIG_BOOTCOMMAND "run sdboot; run ubiboot; run nfsboot"
+@@ -155,7 +155,7 @@
+                "ubi read ${fdt_addr_r} dtb && " \
+                "run fdt_fixup && bootz ${kernel_addr_r} - ${fdt_addr_r}\0" \
  
- #define DFU_ALT_NAND_INFO      "vf-bcb part 0,1;u-boot part 0,2;ubi part 0,4"
+-#define CONFIG_BOOTCOMMAND "run ubiboot; " \
++#define CONFIG_BOOTCOMMAND "run sdboot; run ubiboot; " \
+        "setenv fdtfile ${soc}-colibri-${fdt_board}.dtb && run distro_bootcmd;"
  
+ #define BOOTENV_RUN_NET_USB_START ""
diff --git a/meta-fsl-extras/recipes/u-boot/u-boot-toradex_2015.04.bbappend b/meta-fsl-extras/recipes/u-boot/u-boot-toradex_%.bbappend
index 9f98fc3..ea4549e 100644
--- a/meta-fsl-extras/recipes/u-boot/u-boot-toradex_2015.04.bbappend
+++ b/meta-fsl-extras/recipes/u-boot/u-boot-toradex_%.bbappend
@@ -27,17 +27,6 @@
 ##
 ############################################################################
 
-PV = "v2015.04-v2.6b2.1+git${SRCPV}"
-SRCREV_b2qt = "90a974d34aaa85d5ce69f83067928592c5389990"
-SRCBRANCH = "2015.04-toradex"
-COMPATIBLE_MACHINE = "(mx6|mx7|vf)"
-
-do_deploy_append_apalis-imx6() {
-    cd ${DEPLOYDIR}
-    ln -sf u-boot-${type}-${PV}-${PR}.${UBOOT_SUFFIX} ${UBOOT_SYMLINK}-${type}
-    ln -sf u-boot-${type}-${PV}-${PR}.${UBOOT_SUFFIX} ${UBOOT_BINARY}-${type}
-}
-
 FILESEXTRAPATHS_prepend := "${THISDIR}/${PN}:"
 SRC_URI += " \
         file://0001-Make-sdboot-default-on-all-boards.patch \